Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.9 LAccepted-AOC | L1 | Accepted-AOC being lowest | |
| 2 | L2₹13.6 L+₹1.6 L (13.7%)Rejected-Finance 9 SHUBHASH BHAWAN RAJENDAR MARG MOUNT ABU 307 501 | MOUNT ABU | SIROHI | RAJASTHAN | 307501 | L2 | Rejected-Finance Highest amount quoted |
Tender Value
₹12.9 L
EMD Value
₹25,800
Closing Date
18 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE I UDAIPUR
ASST. GARRISON ENGINEER (I) EKLINGGARH CANTT, UDAIPUR (RAJ.) - 313001
PROVISION OF IRON GRILL/ FRAME PROTECTION TO WATER STORAGE TANK IN CERTAIN BLDGS AND PROVN OF TOILET NEAR BLDG NO CMH-04 (OFFICE COMPLEX) FOR JCO/ OR AT MILITARY STATION MOUNT ABU
2023_MES_623263_1
8842/E8/AGE (I) UDAIPUR
Open Tender
Civil Works
Item Rate
120 days
ARMY AREA MOUNT ABU
as per tender documents
5 documents required · 5 mandatory
₹500
AGE I UDAIPUR
₹25,800
Yes
11 Dec 2023
16 Oct 2023
21 Nov 2023
16 Oct 2023
18 Nov 2023
30 Oct 2023
Amount
Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and as directed.
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5M in depth for foundation etc and getting out in hard/dense soil complete all as specified and as directed.
Returning filling including spreading, levelling, watering and well ramming in layers n exc. 25cm.
Removing excavated material (soil) exc 250m but n exc 500m and depositing, where directed at a level n. exc 1.5 m above the starting point complete all as specified and as directed.
Material & Labour PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.
Material & Labour RCC 1:2:4 type B-1 (nominal mix) (20mm graded aggregate) as in foundation, including raft, footings, foundation beams, plinth beams/ plinth band, bases for columns etc complete all as specified and as directed.
Material & Labour RCC 1:2:4 type B-1 (nominal mix) (20mm graded aggregate) as in beams, cantilever, lintels over 1.5m span etc complete all as specified and as directed.
Material & Labour RCC 1:2:4 type B-1 (nominal mix) (20mm graded aggregate) as in columns, pillars, piers, posts and struts etc complete all as specified and as directed.
Material & Labour for RCC 1:2:4 type B-1 (Nominal mix) for slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete.
Material & Labour formwork to sides of concrete foundations, footings, bases of columns of foundation and plinth beams; and similar work; vertical or to batter rough finished surfaces of concrete flat all as specified.
Material & Labour formwork to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports, overhangs, etc. rough finished surfaces of concrete flat all as specified.
Formwork to soffits of suspended slabs, flat, such as roof slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)
Material & Labour form work to sides of columns and stanchions for rough finished surface of concrete, square, rectangular or polygonal complete all as specified and directed.
Material & Labour mild steel TMT bars 10mm dia and over, cut to length, bent to shape required incl cranking, bending spirally for hoping for columns hooking ends and bindind with ms wire (annealed) not less than 0.9mm dia quality confirming to all as specified.
Description same as above but, 5 mm dia and over and incl 10mm dia in stirrups, spacers and binders
M/L for brick work with kiln burnt bricks built in CM (1:6) using sub class 'B' bricks of compressive strength not less than 35 Kg/Sqcm straight or curved on plan exceeding 6 mtr mean radius with old size bricks all as specified.
Material & Labour 15mm thick cement plaster (External) on fair faces of brick work or concrete surface on wall in CM 1:6 finished even and fair without using extra cement complete all as specified and directed.
Material & Labour 10mm thick cement plaster (internal) on other than fair faces of brick work or concrete surface on wall in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.
Material & Labour for hard core of broken stone or boulders gauge n.exc 63mm deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface of broken bricks aggregate, all as specified.
Material & Labour for 75 mm thick PCC 1:4:8 of type D-2 using 40mm graded stone agrregate as in sub base of floors etc complete all as specified and directed.
Material & Labour coloured Non Skid ceramic jointless tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 Sqm but n. Exc. 0.18 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed with CM 1:6.
Material & Labour for Glazed ceramic coloured tiles in vertical surface 300 x 600mm x 7-8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 10 mm thick rendering in CM 1:6 complete all as specifed and directed.
Supply and fixing vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) white colour including PVC sheet cover.
Supply & Fix PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and all fittings and connections all as specified and directed.
Supply & Fix Jet spray, chromium plated, for EWC including hinges fixed complete all as specified and directed.
Supply and fix brass chromium plated tubular towel rail, 20 mm dia, 'D' type, 60 cm long between flange fixed complete all as directed.
Supply and fix pillar taps cast copper alloy with capstan heads, chromium plated, fancy type of size 15 mm bore screwed down, high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and flynut, screwed for 15 mm iron pipe and fixed.
Supply & Fixing of GI water tubing, medium grade with fittings, fixed to wall and ceiling or laid in floor of size 15 mm bore.
ditto all as per item No 28, but 20 mm bore
Cutting chases in brick wall, girth not exceeding 10 cm for concealing water tubing and making good in cement mortar 1:3.
Supply and fix stop valve cast copper alloy, chromium plated, fancy type with long shank and cup concealed type of size 15 mm complete all as specified and directed.
Supply and fix angle cock cast copper alloy, chromium plated, fancy type with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed, concealed of size 15 mm bore.
Supply and fix, bib taps, cast copper alloy, chromium plated, fancy type with crutch or butterfly hande screwed down, screwed for iron pipe or for brass ferrule and fixed, concealed of size 15 mm bore complete all as specified and directed.
Supply and fix of rotational moulded HDPE water storage tank 1000 ltrs capacity (cylindrical vertial with closed top) double layered, ISI marked, hoisted and fixed in position complete.
Supply and fixing of ball valve, high pressure with polythene float and flynut, screwed for iron pipe or brass ferrule of size 20 mm complete.
Supply and fix, gun metal valve with iron wheel head, screwed both ends for iron pipe and fixed of size 20 mm bore complete all as specified and directed.
Supply & Fixing 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
Supply & Fixing 75mm PVC (SWR) bends any radius complete all as specified and directed.
Supply & Fixing 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
Supply & Fixing 110mm PVC (SWR) bends with access door any radius complete all as specified and directed.
Supply and fixing SGSW gully trap 150 x 100 mm size square or round mouthed type 'P'.
Supply and fixing of 75 mm change with PVC trap with CP gratings (minimum weight 250 gm) including jointing to waste pipe fixed in cement concrete (1:2:4) type B1 all as specified and directed.
Supply & Fixing in repairs 32 mm PVC waste pipe for wash basin, 600 mm long
Supply & Fix PVC connections 45 cm long including 15 mm bore PTMT nuts on both ends complete all as specified and directed.
Material & Labour for rendering 10 mm thick in 1:3 mixed with integral water proofing compound all as per manufacturer instruction over concrete surfaces finished even and smooth without using extra cement complete.
Material & Labour for Providing water proofing treatment over cleaned roof surface with super thermo APP modified water proofing membrane comprising of the following for Non Approachable roofs:-
Cleaning of plastered roof surfaces and applying a coat of bitumen primer @ 0.40 Ltr/Sqm on top of dry surface of finished cement mortar plaster. One coat of hot blown bitumen of grade 85/25 @ 1.2kg /sqm shall be applied over primed surfaces and applying 3mm thick APP modified polymeric membrane with non woven polyster renforcement shall be laid. The side overlaps shall be min 75mm and the end laps shall be min 100mm. All overlaps and joints shall be sealed by flame all as specified and directed by Engr-in-Charge. Applying two coats of aluminum paint on top of membrane @ 0.10Kg/Sqm
Material & Labour for brickwork with sub class ‘B’ bricks in one brick thick honey comb walling, built in CM 1:4
Supply & Fixing in repair vitreous china wash hand basin, white flat back of size 550 x 400 mm including bracket.
Supply & Fixing solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawing.
Supply & Fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing
Supply and fixing butt hinges extruded aluminium alloy with galvanised mild steel hinges pin, anodised 100 mm size fixed to PVC frames complete.
Supply & Fixing aluminium alloy, anodised, sliding door bolt of length 250 mm with hasp and staple (bolt type) & fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy.
Supply & Fixing aluminium anodised barrel tower bolt of extruded section 200 mm long.
Supply & Fixing aluminium anodised handle cast type 100 mm long.
Material and labour for preparation of newly plastered surface of walls and applying two coats of cement based paint over a coat of 1 mm thick Birla white wall care putty etc all as specified and directed.
Material and labour for preparation of newly plastered surface of walls and applying two coats of oil bound distemper over a coat of 1 mm thick Birla white wall care putty and smooth surface etc all as specified and directed.
Material & labour for coloured machine pressed precast concrete interlocking paver block rubberised moulded any shape & size conforming to IS- 15658 - 2006 of 80 mm thickness M-40 Grade with grey cement & pigment complete all as specified and directed.
Material & Labour for Sand filling under floors or in foundations including watering and consolidation or for laying bedding to paver blocks etc complete all as specified and directed.
Supply & Fixing steel ventilators with centre hung shutter including two pairs of brass cup pivots, catch spring and pulley wheel, complete all as specified and directed.
Material & Fixing two coat of syntetic enamel paint over new steel surface of any description over 10cm in width or grith not otherwise described over shop coated red oxide primed surface including preparation of surfaces complete.
Supply & Fixing Sheet glass, 3mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.
Material and labour for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
Supply and fixing of welded steel wire fabric fixed/welded to steel members complete upto in triple story bldgs weight exc 4 Kg per sqm complete all as specified and directed.
Material & Labour two Coat of synthetics enamel paint over new steel surfaces of any description over 10cm in width or girth not otherwise described over one coat red oxide primer including prepration of surfaces complete all as specified and directed.
Cutting holes in brick/stone walls built in cement mortar or cement lime mortar or stone walls built in mud mortar depth of embedded portion of holdfasts or lugs measured from the face of the jamb n.exc half brick into the wall for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.
Material and labour for cement concrete type B0 1:2:4(12.5mm graded aggregate) as, in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.
Material & Labour for point wiring complete with 1.5 sqmm single core multi stranded copper conductor PVC insulated unsheathed cable 1100 volts grade drawn through in concealed and PVC casing caping with all accessories as required and directed by Engr-in charge, fixed on the surface of Wall/ roof/ceiling / dash fasteners/ wooden gutties and cadmium plated screws as per IS on existing/new if required at site sunk type CI/GI Steel/Wooden terminal with suitable for regular/Modular boxes with 3 mm thick laminated sheet concealed in wall etc. including 1.5 sqmm unsheathed copper continuity conductor connected to common earth dolly.
One light point controlled by one 5 Amps SP switch
One ceiling fan/ Exhaust point controlled by one 5 Amps SP switch
Supply & Fixing switch piano type, flush button single pole, one way 5 amps complete all as specified and directed.
Supply & Fixing of ceiling rose, surface type bakelite 65 x 50 mm three terminal complete all as specified and directed.
Supply & Fixing of lamp holder , insulated body cord grip pattern suitable fixing on wall/ pendant fittings.
Supply & Fixing MCB distribution box 4 way double door powder coated sheet metal encloser 240 volts SPN including 200 amps rated bus bar of the following type.
Supply & Fixing of MCB SPN in the DBs catered above of the following ratings
MCB SPN 32 Amp
MCB SP 6 to 32 Amp
Supply & Fixing heavy duty PVC insulated aluminium conductor 1100 volt of cross section area 4 sqmm 2 core complete all as directed at site by Engr in charge. Make - Polycab/Finolex/KEI
Supply and fixing PVC exhaust fan of size 200mm sweep with louver 1280 RPM, air delivery 520 CMH, power input 28 W single phase 240 Volts with connected accessoris and making necessary arracgement to fix in toilet complete all as directed. Make - CG/Havells/Bajaj
Supply and Fixing LED tube light fitting 18 watt, 4 feet long all as per directed by Engr-in-Charge .
Supply and Fixing LED Bulb 12 Watt complete all as per directed by Engr-in-Charge.
Haritwal traders
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .