REPAIR/MAINT OF DRAIN FENCING FOOTPATH AND BOUNDARY WALL CLEANING OF SEWAGE LINE SEPTIC TANK AND SOAKAGE WELL IN KSP CCPU GORKHA SAINIK INSTT PRS APS/LBS MARG ARBITATION CELL COMD CANTEEN DEPOT UNDER GE (WEST) LUCKNOW

Amount

M&L for brick work with fly ash bricks of old size, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:4 as in manhole/septic tank /soak well etc and including demolition of old brick work built in cement mortar including all quoins, pillars etc but excluding ashlar facings, dressed stone work and precast articles complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation and getting out soft/loose soil etc. (including cutting of roads) or for shafts, wells, cesspits, manholes and sewage lines, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth complete all as specified and as directed.

M & L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation, filling and mass filling concrete etc including necessary formwork including demolition of Cement concrete (unreinforced) in ground floor and paving n exc 15cm thicknes and below or above ground levelcomplete all as specified and as directed.

M & L PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in coping incl necessary form work finished even & smooth with using pigment in cement Cement concrete (unreinforced) in ground floor and paving n exc 15cm thicknes and below or above ground level complete all as specified and as directed.

Returning filling in of excavated any type soil including spreading leveling watering and well ramming in layers n exc 25 cm thick complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M & L for 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base etc.including demolition of Cement concrete (unreinforcde) in ground floor and paving n exc 15cm thicknes and below or above ground level complete all as specified and as directed

Providing and laying 60mm thick factory made chamfered edge cement concrete rouber moulded paver block of M-35 grade with approved colour design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 25mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;complete including demolition of existing interlocking complete all as specified and directed.

M&L exterior tiles size 10-12mm thick set on 15mm thick cement screed(1:6) slurry and pointed incl white or colour cement to match complete over sub base including dismantling of existing tiles including bedding etc complete all as specified and directed.

M&L Chequered cement concrete tiles coloured PU mould 30cmx30cmx20mm thick, jointed and pointed in neat cement slurry with grey cement and no pigment set on and including 15mm thick cement screed(1:6) slurry and pointed incl white or colour cement to match complete including dismantling of existing tiles including bedding etc complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:6 on brick wall or concrete surface including finishing the surface even and smooth without using extra cement including taking down cement or cement lime plaster on walls any description including racking out joints hacking for key, scrubbing down with water etc. and removing rubbish complete all as specified and as directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on brick wall or concrete surface including finishing the surface even and fair including taking down cement or cement lime plaster on walls any description including racking out joints hacking for key, scrubbing down with water etc. and removing rubbish complete all as specified and as directed.

M & L for preparation of new decorated surfaces of wall applying two coat of cement base paint over a coat of primer complete all speciified and directed

M&L for preparation of old surface of walls and applying one coats of cement base paint complete all as specified and as directed.

Dismantling of existing RCC/ Steel /Wooden posts or struts (wood, steel or R.C.C.) any section,concrete ,brick work ,massonery etc . including taking out embedded portion and making good disturbed ground complete all speciified and as directed.

Dismantling / taking down chain link fencing, any size or type,and removing the site complete all speciified and as directed.

M & L for cement concrete 1:2:4,Type B1(20 mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and as directed.

S & F, angle iron (Fe-310) as in posts, struts in fencing including cutting top to shape required, drilling holes, notching for wire etc complete all speciified and directed

Supply only galvanised chain link fencing, any size or type complete all as specified and directed

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails straining bolts, etc including provision of binding wire complete all speciified and as directed.

Supply only MS screw, bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exceeding 5cm and not exceeding 10cm long and dia complete all speciified and as directed.

S & F in repair, galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire complete all speciified and as directed.

Supply and fixing framed work such as grills, gratings etc for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc.with ends of bars shouldered and / or riveted or forget into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, frame work of water tank and similar work conforming to Fe 290 Gde E-165 complete including dismantling of mild steel work of any description complete all as specified and directed.

M&L for preparing old painted surface of steel/iron of any description area exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L preparation of new steel Surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

M&L for providing precast RCC 1:2:4 type B-1 using 20mm graded mechanically crushed stone agg as in cover slab for man holes, drains, soak well etc and similar articles etc, set in CM 1:6 with plain faces including chamfered weathering throating etc incl necessary form work and including demolition of old reinforced concrete of any description in any postion not otherwise specifically provided far complete all as specified and as directed.

Supply and fix mild steel deformed bars or TMT bars 10mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

S&F for mild steel deformed bars or TMT bars 6 mm to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

Cleaning of soak well upto 2.4 m dia, 6 m depth (liquid depth) using mechanical pumps diesel driven with fuel, operator and necessary excavation on half buried night soil and disposed off soak well water etc in pits including necessary excavation and earth work for pits for burrying the night soil etc in soft/loose soil complete all as specified and as directed.

Cleaning/disludging of existing septic tank of any capacity/sump well of any dia and depth incl taking out sludge in any form and other foreign matter etc viz sediment, sand, ash, grease, fibre, silt, roots or vegetation etc means of sewage sucking machine or by way of any other suitable means and removing the sludge outside MD land by any means complete all as specified and as directed. Note: The sludge/burried soil etc taken out shall be stacked alongwith the septic tank, sump well etc. After 48 hours of the sludge taken out, measurement shall be taken as of the solid contents for the purpose of payment. The tenderer are advised take up this aspect in mind while quotating the rates. After taking measurements, the solid contents shall be disposed off outside the MD land/area

M&L for cleaning of sewer line 150 mm bore pipe, of any depth, of any location, manhole of any depth, section, size between the sewer lines sewer line to septic tank/soak well/sump well by means of sewage sucking machine or by way of any other suitable means including disludging foreign material, sand, ashes, fibre, silt, grease, night soil, etc and removing the taken out sludge/material out side MD land by any means/source keeping the sewage line functional of the pipe lines, complete all as specified and as directed.

~ditto~ all as per item No. 31 above but 200 mm internal dia of pipe complete all as specified and as directed.

M&L for cleaning of manholes any depth of any loc, section after cleaning trap, wc, soil/vent pipe gully trap upto and incl first manhole manually or mechanically or by way of any other suitable means or by rodding between trap and manholes incl disludging foreign material sand, ashes, fibre, silt, grease night soil etc and removing the taken out sludge/material outside MD land by any means/sources keeping the sewer line /manhole functional complete all as specified and as directed. Note:- For item No. 29 to 32 : (i) Necssary precautions as well as safety measures shall be taken by the contractor without any extra cost, for working in the foul conditions. (ii) The contractor shall be enterily responsible for the lapse, mishappening to any of the manpower deployed and/or to other equipment/machinary/material at the site of work during the execution. (iii) The work shall be executed with all safety measures under the supervision of highly skilled workman/supervisor without entering into the septic tank, manhole, sludge chamber etc

Taking up broken existing sewer line of any depth and replacing sewer pipe with SGSW pipe 150mm bore including jointing of pipe in CM 1:1, haunching against the sides of pipe in PCC 1:4:8 type D-2 using 40mm graded brick agg incl necessary excavation and earth work, disposal of material up to a distance of 50mtr and making necessary connection after cutting into existing sewer line/manhole to make it functional complete all as specified and as directed.

S&F Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 2.4m dia and 4.5m effective depth complete all as shown in TD drg No TD 576 sheet 1/2 and 2/2 and TD 217 sheet 1/2 and 2/2 , including demolition and filling of existing u/s soakage well with old demolition bldg material or surplush earth/ soil etc upto existing ground levelled after making new soakage well complete all as specified and directed.

S&F Brick work Septic tank designed to carry sewage and sullage water, for 150 users excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in Walls , Base Slab , Baffle walls and Roof Slab including beams etc with Vent shaft , manhole openings with cover connection etc., complete with effective depth of 1.5 meter and overall depth of 3 meter complete all as shown in TD drg No TD 576 sheet 1/2 and 2/2 and TD 217 sheet 1/2 and 2/2 ,including demolition and filling of existing u/s Septic Tank with old demolition bldg material or surplush earth/ soil etc upto existing ground levelled after making new soakage well complete all as specified and directed.

M & L for Plain Cement concrete Type C1 1:3:6 (20 mm graded stone aggregate) as in surface channels and drains.including demolition of Cement concrete (unreinforcde) in ground floor and paving n exc 15cm thicknes and below or above ground level complete all as specified and as directed

S&F in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to wall complete all as specified and as directed.

S&F in repair 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to wall complete all as specified and as directed.

S & F in repair 75mm PVC (SWR) pipe bend with accessable door of the following bore inculding cutting out wall /concrete and finishing of surface to match existing surface complete all as specified and directed

S & F in repair 110mm PVC (SWR) pipe bend with accessable door of the following bore inculding cutting out wall /concrete and finishing of surface to match existing surface complete all as specified and directed.

S & F in repair 15mm bore PVC connection 450mm long with PTMT nuts and washer complete all as specified and directed.

S & F in repair 10 ltrs capacity PVC valveless syphonic action type flushing cistern, low level white with inlet ball valve, float and handle including brackets complete all as specified and as directed.

S & F in repair for CP bib taps 15mm fancy type Chromium Plated cast copper alloy with crutch or butterfly handle complete all as specified and directed.

Taking down rolling shutter for repair / overhauling n.exc 15sqm each making good all the part seviceable/ functional, greacing where ever required ,painting, and refixing in the same opening etc. complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

R K CONTRACTOR AND SUPPLIERS

M/S ANIL ARORA

M/s Vivek Traders

QUALITY CONSTRUCTIONS CO

M/s Chandra Mohan and Sons

PARAMOUNT ENGINEERS

M/S S S A ASSOCIATES

HINDUSTAN TRADING COMPANY