COMPREHENSIVE WELCOME MAINT SERVICE IN HPP DUNN MARG GEN ROAD MALL ROAD OFFR MD ACCN CB LINE MH AREA JCO OR MD ACCN AND REPAIR OF FENCING COMPOUND WALL DRAIN SEWAGE LINE MANHOLE SEPTIC TANK AND PATH ETC IN OTM ACCN OF AGE BR II AREA UNDER GE MIS MHOW

Amount

M&L for preparation of old decorated surfaces of wall and applying one coat of white wash on walls complete all as specified and directed.

All as per item No. 1.00 above but on ceiling.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash on ceiling complete all as specified and directed.

M&L for preparation of old decorated plastered surfaces or un-plastered surfaces of wall and applying two coat of oil emulsion distemper complete all as specified and directed .

M&L for preparation of old decorated plastered surfaces or un-plastered surfaces of wall and applying one coat of oil emulsion distemper complete all as specified and directed .

M&L for complete removal of existing treatment on old decorated surface of wall and applying two coat of oil emulsion distemper white/coloured over one coat of birla wall care based putty (where it is required) all as specified and directed by Engr-in-Charge. Note:- Putty shall be measured and paid seperately.

M&L for preparation of new decorated surfaces and applying two coat of distemper oil emulsion over a coat of putty finish and a coat of alkaline resistant primer complete all as specified and directed

M&L for one coat of 1.50mm thick Birla/JK wall care cement putty on walls/ceiling all as specified and directed

M&L for preparation of old painted surfaces of wood/wood based materials exc 10cm width or girth and applying one coat of synthetic enamel paint as directed and specified.

M&L for preparation of old painted surfaces of steel exc 10cm width or girth and applying one coat of synthetic enamel paint as directed and specified.

Taking down cement plaster on brick or stone walls, etc. with raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed

M&L for rendering 10 mm thick in CM (1:6) on wall/ concrete surfaces finish even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:4) on wall/ concrete surfaces finish even and smooth without using extra cement using WPC compound complete all as specified and directed. Note:WPC shall be measured and paid separetly.

M&L for 5 mm thick plaster on ceiling in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and as directed .

Supply only Liquid water proofing compound complete all as spesified and directed.

M&L for preparation of newly plastered surface and using sand paper to have even and smooth surface and applying 1.5 to 2mm thick JK/BIRLA white putty on prepared surface and applying two coats of weather coat paint (Weather coat Exterior emulsion) manufactured by Berger' or Asain Apex white or tinted over a coat of white water base primer complete all as specified and directed by Engr in charge. Note :- (a) Each stage i.e preparation of surfaces,application of putty, application of primer, application of first coat and application of second coat shall be passed by Engineer-in-Charge (b) Written Warranty for four years or as per manufacturer's instructions, whichever is more shall be submitted by contractor.

M&L for preparation of old decorated surface of wall and applying two coats of weather coat paint (Weather coat Exterior emulsion )manufactured by Berger' or Asain Apex white or tinted over a coat of white water base primer complete all as specified and directed by Engr in charge. Note :- (a) Each stage i.e application of first coat and application of second coat shall be passed by Engineer-in-Charge (b) Written Warranty for four years or as per manufacturer's instructions, whichever is more shall be submitted by contractor.

M&L for preparation of old decorated surface of wall and applying one coats of weather coat paint (Weather coat Exterior emulsion ) manufactured by Berger' or Asain Apex white or tinted over a coat of white water base primer complete all as specified and directed by Engr in charge. Note :- Written Warranty for four years or as per manufacturer's instructions, whichever is more shall be submitted by contractor.

M&L for preparation of new plastered surfaces of walls height upto third floor and applying two coat of cement based paint over a coat of cement primer complete all as specified and directed

M&L for complete removal of existing treatment on old decorated surface of wall and applying two coat of cement based paint over a coat of cement primer complete all as specified and directed

M&L for preparation of old decorated surface of internal wall by removing existing treatment with mechanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers and applying two coats of acrylic distemper over a coat of primer make the surface smooth using roller all as specified and prescribed by manufacturer of paint and all as directed at site by Engr-in-Charge Note:- (i) The old surface shall be prepared in such a manner that no dents, impressions, or surface irregularities remain visible. The surface must be made even and smooth in strict accordance with the manufacturer’s instructions before the application of distemper. The cost of all materials, labour, and tools and plants (T&P) required for surface preparation and painting shall be deemed to be included in the quoted rates. (ii) The work shall be executed through an authorised applicator of the manufacturer, after the contractor concludes a Memorandum of Understanding (MoU) with the manufacturer to ensure a company-backed guarantee. The authorised applicator proposed by the contractor shall be approved by the GE/AGE prior to commencement of the work. (iii) All materials required to be incorporated in the work shall be brought to the MES store yard by the contractor. These materials will then be issued by the department for use in the work, to ensure that the quantity consumed is in accordance with the manufacturer’s recommendations. (iv) After completion of surface preparation, the same shall be got approved from GE/AGE for each building prior to the application of distemper. (v) The colour and shade of the distemper shall be as approved by the GE/AGE. (vi) Putty shall be measured and paid separately.

M&L for preparation of old decorated surface of exterior wall by removing existing treatment with mechanical sander (rpm 1500-2700) along with dust extraction system for clean environment certified by reputed paint manufacturers, then washing the surface with Bleaching powder solution for treatment of fungal growth and applying two coats of exterior anti fungal acrylic emulsion paint (wallmista of Berger paint or equivalent in Asian paint, Nerolac etc having three years of performance warranty) over a coat of exterior water based primer of same make all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge. Note:- (i) The old surface shall be prepared in such a manner that no dents, impressions, or surface irregularities remain visible. The surface must be made even and smooth in strict accordance with the manufacturer’s instructions before the application of distemper. The cost of all materials, labour, and tools and plants (T&P) required for surface preparation and painting shall be deemed to be included in the quoted rates. (ii) The work shall be executed through an authorised applicator of the manufacturer, after the contractor concludes a Memorandum of Understanding (MoU) with the manufacturer to ensure a company-backed guarantee. The authorised applicator proposed by the contractor shall be approved by the GE/AGE prior to commencement of the work. (iii) All materials required to be incorporated in the work shall be brought to the MES store yard by the contractor. These materials will then be issued by the department for use in the work, to ensure that the quantity consumed is in accordance with the manufacturer’s recommendations. (iv) After completion of surface preparation, the same shall be got approved from GE/AGE for each building prior to the application of paint. (v) The colour and shade of the paint shall be as approved by the GE/AGE. (vi) The quoted rate shall be inclusive of all necessary scaffolding work, lifting arrangement and safety devices as required.

Dismantling of floor, hearth , or wall tiling including cement mortar bedding ( but not backing ) removing serviceable tiles to store yard and rubbish of the primeses complete all as specified and directed.

Demolition of cement concrete in ground floor and paving not exceeding 15cm thick ( below or above ground level ) complete including removal of debries out side MD land all as specified and as directed .

M&L for 25mm thick PCC (1:2:4) type B-0 using 12.50mm graded crushed stone aggregate as in sub base, levelling course, etc complete all as specified and as directed.

M&L for non –skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 450x350x7 mm thick as on vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match over 10 mm thick backing coat on fair faces of brick work in CM (1:4) complete all as specified and as directed.

M&L for 75 mm thick PCC1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation, sub base of floor, etc complete all as specified and directed

M&L for 75mm thick cement concrete 1:3:6 type C2, with using 40mm graded stone aggregate as in floor/ plinth protection finish the surface even and smooth without using extra cement including filling the expansion joints with bitumen filler / filler boards and necessary form work etc complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and as directed.

M&L for 20 mm thick granite (black) thick machine cut, 20mm thick Granite (of any type) tiles machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing of approved quality of any size set and jointed in grey cement slurry laid over and including 10 mm thick backing in CM (1:4) including granite polish to be done by mechanical grinder and moulding edges compete all as specified and as directed.

S&F in repairs rotantional moulded polythylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position complete with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwd for iron pipe 20mm bore omplete all as specified and directed.

S&F in repairs rotantional moulded polythylene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position complete with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwd for iron pipe 20mm bore omplete all as specified and directed.

Cleaning and removing all dirts and scales from service water tanks and from mouth of circulating pipes etc capacity of tank exceeding 250 ltr but not exceeding 500 ltr complete all as specified and directed.

Cleaning and removing all dirts and scales from service water tanks and from mouth of circulating pipes etc capacity of tank exceeding 500 ltr but not exceeding 1000 ltr complete all as specified and directed.

S&F in repair of 15mm bore ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipes and fixed. ( Min Weight 15mm-142 gms) complete all as specified and directed.

S&F in repair of 20mm bore ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipes and fixed. ( Min Weight 20mm-210 gms) complete all as specified and directed.

Taking up or down 15 mm dia old serviceable / unserviceable steel tubing any grade and connections complete all as specified and directed .

All as per item No 38.00 above but 20mm bore.

S&F steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc ,for 15mm bore pipes complete all as specified and as directed.

All as per item No 40.00 above but 20mm bore.

S&F in repairs 15 mm CP long neck bib taps screwed down high pressure chromium plated screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs 15 mm bib taps cast copper alloy, screwed down high pressure chromium plated screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs 15 mm bib cock two way with flange, cast copper alloy, fancy type, chromium plated screwed down for iron pipe complete all as specified and directed.

S&F in repairs stop valves fancy type chromium plated with long shanks fixed with 15 mm dia bore pipes complete all as specified and as directed.

S&F in repairs pillar taps (swan neck type) cast copper alloy with capstan head, screwed down ,high pressure with long screwed shanks and fly nuts fixed in 15 mm bore pipes complete all as specified and directed.

S&F in repairs 15 mm stop cock cast copper alloy, screwed down high pressure chromium plated screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs concealed stop valves fancy type chromium plated with long shanks and cup fixed with 15 mm dia bore pipes complete all as specified and as directed.

S&F in repair CP wall mixer for mixing hot & cold water screwed down for iron pipe 15mm bore complete all as specified and as directed.

S&F in repairs 15 mm wash basin mixutre, centre hole, mixing hot & cold water, fancy type, cast copper alloy, chromimum plated with capstan head, chromium plated, screwed down high pressure, screwed for iron pipe etc complete all as specified and as directed.

S&F in repairs stainless steel sink with drainage board , 1.00mm thick for kitchen, with plug, washers and wastes/coupling,waste pipe etc including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm with bowl size 410mmx 330mmx 160mm fixed complete all as specified and directed.

S&F in repairs stainless steel plate rack for kitchen 1 mm thick of best quality with suitable hanging arrangement and fixed to wall complete all as specified and as directed by Engineer-in-Charge. Note:- Size of plate rack should not be less than 900x1200 mm and weight of rack shall not be less than 8.5 Kg each complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet pedestal pattern white including Plastic water closet seat cover in white colour but excluding flushing cistern and flush pipes complete all as specified and as directed .

S&F in repairs vitreous china squatting pan `Orissa ' pattern of size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipes) including connection to trap and to flush pipe etc and lime concrete bedding including 'P' or 'S' trap complete all as specified and as directed.

S&F in repairs PVC low level flushing cistern of 10 Litres with all internal fittings incl flush pipe and fixing to supply pipe complete all as specified and as directed.

S&F in repairs health faucet with flexible pipe of one mtr length including wall hook for EWC complete all as specified and as directed.

S&F in repairs flexible type PVC waste pipe 32 mm bore of pipe for WHB/SINK/urinal, etc complete all as specified and as directed.

S&F in repairs PVC (SWR) floor trap plain or multi with stainless steel grating incl joining to waste pipe with solvent cement joint dia of outlet 75mm bore complete all as specified and as directed.

S&F in repairs brass CP tubular towel rail 20 mm dia 60cm long between flange with brackets etc as in repair complete all as specified and directed.

S&F in repairs CP towel ring, dia not less than 200mm complete all as specified and directed.

S&F in repairs 125 mm size chromium plated shower rose with siwel joint suitable for 15 mm bore GI pipes complete all as specified and directed.

S&F in repairs Plastic water closet seat cover in white colour, closed pattern with flat bottom, and mild steel chromium plated for aluminised hinging device complete all as specified and directed.

S&F in repairs wash basins, vitreous China white flat back size 580x450mm size, including cutting for and pinning in ends with & incl MS adjustable brackets or erecting stand complete all as specified and directed.

S&F in repairs pedestal wash basins, vitreous China white flat back size 580x450mm size, including cutting for and pinning in ends with & incl MS adjustable brackets or erecting stand complete all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all asspecified and as directed

S&F in repairs corner glass shelf (with bracket) all as specified and directed

S&F in repairs CP grating 100mm dia complete all as specified and as directed.

S&F in repairs 25 mm dia powder coated drappery curtain rod with brass /nickel chrome polish bracket complete all as specified and directed .

S&F CP waste coupling of size 32 mm dia WHB with long screwed shanks and fly nut fixed in repair complete all as specified and directed.

Cutting chases in brick wall built in cement mortar for concealed water tubing and making good with cement mortar 1:4 ,cutting depth not exc 10 cm complete all as specified and directed.

Resecuring or easing and adjusting without taking down shutter of any discription n exc 1.0 sqm each complete all as specified and directed

Resecuring or easing and adjusting without taking down shutter of any discription exc 1.0 sqm but nexc 2.0 sqm each complete all as specified and as directed

Taking down chowkhats or frames with shutter (with out taking off shutters from the frame) area n. exc 1.5 sqm each complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm but n.exe 2 sqm each complete all as specified and as directed.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of plain 5mm plain colour PVC sheet reinforced with ms square tube, with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of ms tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and as directed.

S&F in repairs galvanised mild steel wire cloth of 0.56mm dia wire and average width of aperture 1.18mm & fixed with tacks or galvanised iron wire staples,etc complete all as specified and as directed.

S&F 100 mm Butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F in repairs 18mm thick factory made 100% solid rigid PVC (Poly Vinyl Chloride) foam sheet Prelam colour having density of 600kg/cbm manufactured by an Iso 9001-2015 certified company.Termite proof,water proof and flame retardant PVC sheet,manufactured by single layer extrusion process for one side prelaminated solid PVC foam sheet. PVC film laminate should be pasted on PVC sheet with suitable adhesive and approved shade complete all as specified and as directed.

S&F in repairs stainless steel self closing hinge of 75 mm size for PVC door shutter complete as specified and directed.

S&F in repairs 100 mm size MS mat / glossy finish handle complete as specified and dirceted.

S&F in repairs 50 X 15 mm size magnet door catcher for closing for PVC door shutter complete as specified and directed.

S&F in repairs mild steel drawer cabinet channel for moving the drawer etc complete as specified and directed.

S&F in repairs modular type stainless steel basket size 0.50 m x 0.53 m x 0.10 m (dia of wire not less than 3.0mm) of any shape with side sliding roller clip and sliding rails on both side fixed with steel screws incl all fixing arranement complete as specified and dirceted.

All as per item No 87.00 above but basket size 0.50 m x 0.53 m x 0.15 m complete as specified and dirceted.

All as per item No 87.00 above but basket size 0.50 m x 0.53 m x 0.21 m complete as specified and dirceted.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty of fixed with beads including and S&F sheet glass plain ordinary quality 3.00 mm thick and glazing with oil putty/Bead not exc. 0.50 sqm in each pane complete all as specified and directed.

S&F in repairs stainless steel wire cloth of 0.36mm dia wire and average width of aperture 1.4mm & fixed with tacks of stainless steel wire staples etc complete all as specified and as directed.

S&F in repairs stainless steel hinges for modular kitchen shutters complete all as specified and as directed.

M&L for preparing old wall/ceilling/roof surface which includes clean and free from oil or loose materials and applying two coats of ''Asian Smart Care Damp Block 2K'' or equivalent two components acrylic polymer-modified cementitious high performance coating all as per manufacturers instruction and as directed by Engr-in-Charge.

M&L for complete removal existing surface finishes and applyying putty 2 mm thckness and applying texture paint design as approved by GE and applying two coats of plastic emulsion (royal shyne/equvalent) over a coat of primer, complete all as specifed and directed Engr-in-Charge.

M&L for PCC (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) as in sub base, levelling course, etc complete all as specified and as directed.

M&L for chequered cement concrete tiles with grey cement and pigment of size 40cmX40cmX40mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for 60mm thick machine pressed precast concrete interlocking paver block of M-35 Gde of approved shape, size and colour conferming to IS 15658-2006 and including joints filled with sand over and including 25mm stone dust as in levelling course of interlocking complete all as specified and as directed.

M&L for 80mm thick machine pressed precast concrete interlocking paver block (glossy finish) of M-40 Gde of approved shape, size and colour conferming to IS 15658-2006 and including joints filled with sand over and including 25mm stone dust as in levelling course of interlocking complete all as specified and as directed.

Dismantling fencing wire mesh, any type complete all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) embedded in concreteany section, including taking out embedded portion and making good disturbed ground complete all as specified and as directed.

Dismantling of wrought iron or mild steel work of any description not other wise provided for complete as specified.

Excavating post holes or similar holes, each not exceeding 0.5 Cum, getting out in Soft/ Loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n.exc 50m & making good surface complete all as specified and directed.

M&L for PCC 1:2:4 type B2 (using 40 mm graded stone aggregate) as in foundation ,post, etc complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc., including provision of binding wire. complete all as specified and directed by Engr in Charge.

Supply only Chain link MS galvanised fencing, any size or type complete all as specified and directed.

S&F 10 mm dia MS TMT bar for fixing of chain link fencing with post complete all as specified and directed.

S&F 11 to 15mm dia of neck MS Screw bolts(Machine made ) with hexagonal or square heads at one end and screwed at other end or both end, and screwed end to be fitted with washer and one hexagonal or square n.exc 20 cm long etc complete all as specified and directed.

S&F MS framed work as in doors or gates of angle iron, door frame or other section with gusset plate, rails, braces etc complete, drilled for fixing of steel sheeting or other covering etc, to prepared for hanging or sliding with including either hooks and hinges also fastening grills, grating, hold fast of doors and windows chowkat etc, with ends of bars shouldered and or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanksand fixing and similar work confirming to fe 290 Gde E-165 including of dismantling of Timber structure if any complete all as specified and as directed.

S&F Green/Blue powder coated 4mm dia mild steel wire mesh fence system perimeter coated welded wire mesh fence steel panel of area n.exc 10 Sqm and mesh size as directed by Engr-in-Charge complete all as specified and as directed.

S&F powder coated mild steel post for 3D fence including all clamps,bolts, fittings,fixtures and size of post as decided by Engr-in-Charge complete all as specified and directed.

Desilting and cleaning of open drains of any section by mechanical means, including removal of solid and semi-solid materials of any type, vegetation growth, and sludge. The desilted materials shall be disposed of beyond a distance exceeding 5.00 KM from the edges of the drains. The work shall be carried out complete in all respects as specified and as directed by the Engineer-in-Charge.

Demolition of Brickwork or stone/ boulder masonry, built in Cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles including removing debris outside MD land complete all as specified and as directed.

M&L for brick work with using flyash bricks modular size straight or curved on plan exc 6 m mean radius built in CM (1:6) complete all as specified and as directed.

M&L for brick work with using flyash bricks modular size straight or curved on plan any radius in half bricks thick wall built in cm (1:4) complete all as specified and as directed.

M&L for stone walling of squared rubble,regular coursed, well bonded, bedded and solidly hearted, built in CM 1:4 complete all as specified and as directed.

M&L for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in coping, cills ,string courses, apex stone, bed plates, kerbs, bands, lintels n.exc 1.5m length etc including necessary form work, weathering, slightly rounded or chamfered angles and throating all as specified and directed.

M&L for applying three coats of white wash on walls including preparation of newly plastered surfaces of any description complete all as specified and as directed.

M&L for cement concrete as in surface channels and drains Type B2 1:2:4 (40 mm graded stone aggregate) complete all as specified and as direced.

Extra for forming fair finished drain or channel of 30cm inner girth in cement concrete using extra cement including forms moulds etc complete all as specified and as direced.

S&F factory made steel fibre reinforced (SFRC) man holes covers with frames including necessary hold fast/hooks (medium duty) of 560 mm dia or rectangular of equivalent area including fixing with CM 1:4 and not less than 50mm thickness complete all as specified and directed.

As per item No 120.00 above but without frame

Dismantling of Asbestos cement (corruga ted, semicorrugated, etc.) sheets in roof coverings etc complete all as specified and as directed.

S&F 0.50mm thick (including coated thickness) pre-colour pre- profiled (Galvalume/zinkalume) sheets of required colour and design having tensile strength of 550 Mpa as in roof sheeting/sunshade/ wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer / profile maker instruction complete all as specified and as directed.

S&F 0.50mm thick (including coated thickness) pre-painted pre- profiled (Galvalume/zinkalume) sheets of required colour and design having tensile strength of 550 Mpa Plain steel sheet as in roof sheeting/sunshade/ wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer / profile maker instruction complete all as specified and as directed.

Dismantling of timber scantlings as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section in un-framed work complete all as specified and directed.

S&F MS steel Hollow Section work in tubular trussles, purlins, rafter, tubler column, where connected common rafter and running rails fixed with angle cleat or other connection plates including special shaped washer etc, complete using ERW or induction butt welded tubes conforming IS-4963,1993 and IS-1161-1979 grade ST-240 complete all as specified and as directed.

S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming IS-1161-1979 grade ST-240 complete all as specified and as directed.

S&F Mild steel plates (Plain or chequered) as in shoe plate, base plate and gusset plates forming holes for roof frame work, trusses, rafters etc of grade Fe 410 WA complete all as specified and as directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

M&L for preparation of newly steel surfaces, of any description, over 10 cm width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide complete complete all as specified and as directed.

Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and as directed.

M&L for rendering 15 mm thick plaster on concrete /wall surfaces in CM 1:3 mixed with water proofing compound complete all as specified and directed. Note: WPC shall be measured and paid separately.

Supply only Integral water proofing compound complete all as specified and directed.

M&L for applying two coats of Dr Fixit pidecrete URP in sunken floor portion of toilets & bathroom, chajja, staircase. etc by using URP + cement in the proportion of (1:1.5) and making pedicrete solution and applying by brush. Etc complete all as specified and as directed by Engineer-in-Charge.

M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.20 Kg/Sqm including cleaning surfaces complete all as specified and directed.

M&L for PCC 1:5:10, type E-2 (using 40mm graded stone aggregate) as in filling of sunken floors etc. complete all as specified and directed.

M&L for Non - skid Ceramic joint free coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in CM 1:6 complete all as approved and directed

M&L for glazed coloured joint free ceramic tiles 350x 250x 7 mm / 450X 350X 7mm thick, on vertical surfaces of wall such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10mm thick rendering on stone masonry surfaces or surfaces other than fair faces of brick work in CM 1:4 complete all as specified and directed.

Demolation of precast RCC jallies including raming of any description any in any position set in cement mortar complete all as specified and directed.

M&L for providing precast cement concrete (1:2:4) louvers and jallies 50 mm thick (measured solid) including all mouldings but excluding frame & set in CM 1:4 complete all as specified and directed.

M&L for precast reinforced cement concrete slab type B1, 1:2:4 ( 20mm graded aggregate ) as in landing, drain cover slab ( for manholes etc ) , chajjas , drain cover and shelves and similar articles with plain faces .(Reinforcement shall be measured & paid separatel.) complete all as specified and directed.

Cleaning of Sewage pipe line (RCC/SGSW) of Upto 300mm bore by means of sewage cleaning jet machine / compressors/Drain jetters Pumps and clean out the sluge /liquid mud or any other obstruction material to any depth including nesesarry rodding, working in foul position and depositing of sludge/silt/liquid mud beyond the premises of MOD land etc complete with all specified pressure rating and complete all as directed by Enge-in-charge. Note :- All other arrangements such as electricity, water, etc., are included in the quoted rate.

Cleaning of manhole upto 1.50m depth from bottom of manholes surface including working in foul position and removing of sludge/ silt/liquid mud or any other obstructions materials etc from manholes and depositing beyond the premises of MOD land etc complete all as specified and as directed.

Cleaning of manhole exc 1.50 m but not exc 3.00 m depth from bottom of manholes surface including working in foul position and removing of sludge/ silt/liquid mud or any other obstructions materials etc from manholes and depositing beyond the premises of MOD land etc complete all as specified and as directed.

Cleaning of manhole exc 3.00 m but not exc 4.50 m depth from bottom of manholes surface including working in foul position and removing of sludge/ silt/liquid mud or any other obstructions materials etc from manholes and depositing beyond the premises of MOD land etc complete all as specified and as directed.

De-watering, including removal of sludge, mud, or other waste materials from septic tanks using pumping devices or mechanical means, and disposal of the sludge outside MOD land using covered tanks, complete as directed. Note: The unit rates quoted by the contractor shall be deemed to include the operation of mobile sewage pumps for dewatering of septic tanks wherever required. No extra payment shall be admissible on this account.

De-watering, including removal of sludging mud and other waste materials from soak wells, as well as extraction of brick bats and stone aggregates by means of pumping devices, mechanical methods. The work shall also include draining and removal of sludge from MOD land using covered tanks, complete in all respects as specified and as directed. Note: The unit rates quoted by the contractor shall be deemed to include the operation of mobile sewage pumps for dewatering of soakage wells wherever required. No extra payment shall be admissible on this account.

Excavation in trenches n.exc 1.50 m wide and n.exc 1.50 m in depth for foundation or shafts, wells, cesspits, manholes, pier holes, sewage/water lines etc complete and getting out in soft/loose soil complete all as specified and directed.

All as per item No 148.00 above but exc 1.50 m but not exc 3.0 m depth

Returning filling in incl spreading leveling, watering, and well, ramming in layer nexc 25 cm in layers complete all as specified and directed.

Removing excavated material to a distance exc. 50 m and depositing where directed at a level n. exc 1.50 m above the starting point complete all as specified and directed.

Demolition and breaking of drain pipes up to 200 mm dia (Salt galzed ware, AC or Reinforced concrete set in cement mortar etc complete all as specified and directed.

S&F reinforced cement concrete drain pipes of 150 mm dia bore class NP-2, laid and jointed complete with collars etc complete all as specified and as directed.

M&L for concrete bed to drain pipes 150 mm bore including packing under and hunching against the sides of pipe, after they are laid and tested in cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregagte) etc complete all as specified and as directed.

Cutting in to existing man holes for connecting new drains for internal dia of pipe 150 mm, making good to pipe and rendering , cutting out existing benching for and forming branch channel (1/2 round or 3/4 section ) in cement concrete 1:2:4 type 'B1' smooth finished and reforming benching as required complete all as specified and as directed.

All as per item No 155.00 above but 200 mm dia pipe.

S&F in repairs 100 mm bore cast iron floor trap, nahani trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

All as per item No 157.00 above but 75 mm dia CI Trap

M&L for salt glazed stoneware drain pipe of 150 mm dia , grade 'A' laid in trenches and jointed in cement mortar 1:1 including necessary testing on completion complete all as specified and directed.

S&F 110 mm bore SWR pipes single socketed in any length with rubber ring joints fixed to walls ,floors, trenches etccomplete all specified and directed.

All as per item No 160.00 above but 75 mm dia PVC SWR pipe

S&F 110 mm bore PVC (SWR) bends with rubber ring joints fixed to walls complete all as specified and directed.

All as per item No 162.00 above above but 75 mm dia PVC SWR bends

M&L for DWCPE pipe of 180mm outer dia/ 163mm inner dia meter pipes including testing complete all as specified and directed

M&L for racking out cement/lead joints of CI pipes and filling with lead joints / neat cement plaster to stop leakage of joints complete all as specified & directed

S&F Brass heavy double door fittings accessories full set/ kit (Aldrop, Latch, Handles,Tower bolt, Door stopper ) complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of old concrete/ PCC tile surfaces by brooming with coir/wire brushes and washing down with water to remove the fine dust and applying two coats of Lacquer polish (1001) chemical with pigment as approved by GE complete all as specified and as directed by Engr-in Chage.

vikas traders (BID ID -3373959)

ram prashad chotelal batham (BID ID -3372819)

m/s modern builder (BID ID -3369642)