CONSTRUCTION OF LUGGAGE SHED AT MTF THOISE UNDER GE 873 EWS

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm and disposal of excavated earth lead upto 50 m and making good surface all as directed.

Removing excavated material to a distance not exc 50m and depositing where directed at level not exc 1.5m above the starting point all as specified and directed

M&L for Providing precast cement concrete solid building blocks (1:3:6), Type C1 with using 20mm graded stone aggregate exc 20cm thick setting in mortar (1:6), in walls complete all as specified and directed.

M&L for PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) in foundations, filling and mass concrete, complete all as specified and directed.

M&L for PCC 1:2:4, type B-2 (using 40 mm graded crushed stone aggregate) in foundations, filling and mass concrete, complete all as specified and directed.

S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. (Fe 410 -W(Gde-E- 250) quality-A all as specified and directed.

S&F Plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connections (Fe 410 -W (Gde-E- 250) quality-A all as specified and directed.

S&F Plates (plain) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment (Fe 410 -W (Gde-E- 250) quality-A all as specified and directed.

S&F for wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 all as specified and directed.

S&F 0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts in lieu of screws, in roofs, walls etc. with grade of zinc coating 275, all as specified and directed.

S&F 0.63 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

M&L for preparation of new steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new steel and iron surfaces of any description, n. exc 10 cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for plain fillet 2nd class Hard wood section are exc 13 cm but n exc 25 cm in square, rectangular or triangular in section, clean sawn, secure with nail or brads complete all as specified and directed.

M&L for 9 mm thick prelaminated particle board, interior grade,prelaminated one side with decorative choice lamination &other side balancing white lamination,in ceiling fixed with nail to timber frame work complete all as specified and directed.

M&L for 12mm width teak wood lipping 6 mm thick for Patical board/block board complete fix with nail complete all as specified and directed.

S&F plain, solid, straight chowkats of second class hard wood and frames, wrough, framed rebated on the solid, rounded or chemfered, put together with glue pinned at joints complete all as specified and directed.

S&F 35 mm thick factory made 2nd class hard wood plain, framed, panelled shutters (two panels) with lock rail and panelsof 9mm thick BWP commercial; ply or 12mm thick veneered p article boards on both sides. The size of rail and style as per IS-1003 (part-I) kiln seasoned and chemicaly pressure treated complete all as specified and directed.

S&F 25mm thick 2nd class Hardwood glazed and skeleton shutters, open reabeted and prepare to received glass fitted with cut and mitred beads for secuing glass for ventilators complete all as specified and directed.

M&L for preparation of new untreated wood and wood based surfaces of any description, not otherwise described over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty / wooden beeding in square n. exc 0.5 sqm each panes complete all as specified and directed.

S&F 250mm aluminium alloy anodised sliding bolts with hasp, staple and fixing clips of sheet, cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

S&F for 100mm long butt hinges mild steel medium weight cold rolled complete all as specified & directed

S&F for 75mm long butt hinges mild steel medium weight cold rolled complete all as specified & directed

S&F 100mm aluminium handles, cast type, anodised and pattern/design as approved complete all as specified and directed.

S&F 75mm aluminium handles, cast type ,anodised and pattern/design as approved complete all as specified and directed.

S&F 100mm aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 150mm aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

M&L Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specifeid and directed.

M&L for 75mm thick Cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregates as in sub-base complete all as specified and directed.

M&L for 25mm thick Cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregates as in sub-base/under flooring complete all as specified and directed.

M&L for Non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) are of each tile exceeding 0.11 Sqm but n exc 0.18 sqm in floors set and jointed in neat cement slurry over 15 mm thick screed bed or bedding layer of cement mortar 1:4, and pointed in white or coloured cement to match complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6, finished even and smooth without using extra cement complete all as specified and directed.

M&L for prepartion of newly plastered wall surfaces of any description applying Two coat of distemperover a coat of primer complete all as specified and directed.

M&Lfor 15mm thick rendering on fair faces of stone masonry work surfaces in cement mortar 1:4, finsihed the surfaces even and fair complete all as specified and directed.

M&L for prepartion of newly plastered wall surfaces of any description applying Two coat of cement base paint, complete all as specified and directed.

M&L Point wiring with 1.5 Sqmm (nominal area) copper conductor FRLS cable (multi-stranded) PVC insulated and unsheathed electric cable 1100 volts drawn through PVC casing and caping of suitable size (as per conductor run) with all fittings and accessories and including PVC insulated unsheathed electric cable 1100 volts 1.5 Sqmm (multi-stranded) copper conductor single core (green colour) as continuous earth wire connected to common earth dolly including 50mm deep box made out of 2nd class hard wood board of suitable size and shape and other boxes for mounting light fittings etc covered with 3mm thick plastic laminated Hylum ISI marked for following complete all as specified and directed. Note:- Screw used for fixing TW baords, casing and caping ceiling rose, square blocks etc should be nickel cadmium screws.

(a) One light point/ Exhaust fan controlled by one 5 Amps one way switch

(b) One 3 pin socket outlet 5 Amps on independent board

(c) One 3 pin socket outlet 5 Amps on same board

M&L point wiring for power point with 4.0 sqmm (nominal area) copper conductor FRLS cable ( multi-stranded) PVC insulated and unsheathed cable conductor 1100 Volts drawn through PVC casing capping of suitable size(as per conductor run) with all fittings and accessories and including PVC insulated unsheathed electric cable 1100 volts 2.5 Sqmm (multi-stranded) copper conductor single core (green colour) as continuous earth wire connected to common earth dolly including 50mm deep box made out of 2nd class hard wood board of suitable size and shape and other boxes for mounting light fittings etc covered with 3mm thick plastic laminated Hylum ISI marked for following complete all as specified and directed by Engr-in-Charge. Note:- Screw used for fixing TW baords, casing and caping ceiling rose, square blocks etc should be nickel cadmium screws.

S&F Switch piano flush button single pole one way 5 Amps, 240 Volts complete all as specfied and directed.

S&F socket outlet 2 in 1, 3pin, 5A(multipurpose) sutable for 2 pin/3 pin plug flush type complete all as specified and directed.

S&F switch socket combination 3 pin, 5 Amps, 2 in 1 flush type (multipurpose) sutable for 2 pin/3 pin plug complete all as specified and directed .

S&F switch socket combination 2 in 1, 3 pin, 5/15 Amps, flush type (multipurpose). Complete all as specified and directed.

S&F Ceiling rose surface backelite ISI marked with 3 terminal including connecting and testing complete all as specified and directed.

S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

Supply and fixing Rechargeable LED Bulb energy saver 9 W, B22(220-240 V) 50 hz, 6500k fast charging 2200mAH battery including, white color all as specified and as directed. Make:- CG/Phillips/Havells

S&F High efficacy 2 x 2 recess LED luminaire with concentrated light for homogenous illumination, all as per cat no LHEWDRP6IL1W034 of Make : Havells or equivallent model of Make: HPL/Bajaj inluding provision of PVC insulated sheathed round flexible wire with multi strand copper conductor of size 1.5 sqmm 3 core 1100Volts grade complete all as specified and directed.

S&F surface and wall mounted LED batten with polycarbonate housing and integrated electronic driver tube light fitting 20W, 4 ft long, 220 Volts , and connecting to ceiling rose with three core twisted flexible copper cable of suitable size complete all as specified and directed.

S&F LED light fitting 1x10W bulkhead, 220 Volts and connecting to ceiling rose with three core twisted flexible copper cable of suitable size complete all as specified and directed.

S&F MCB DB sheet enclosure, Double door type, single pole and neutral 240V with 200 Amp rated bus bar suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 without MCB and with enclosure blank plates for unused way suitable for 8 way complete all as specified and directed.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning all as specified and directed.

Supply and fixing MCB SPN 240V, 10KA 'C' curve 40-63 Amp current carrying capacity in the MCB DB complete with connection testing and commissioning all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick burried directly in ground not less than 2.25m deep below normal ground level (with the top edge of the plate not less than 1.50 m below the normal ground level) connected to GI earth wire 4 mm by means of GI bolts, nuts, check nuts and washers of GI all as shown in electrical plate No.3 of SSR Part-I connected to earthing test point with and including necessary excavation and earth work in any strata PCC pit 1:3:6 type C-1, 20mm bore medium grade GI pipe for watering 15mm bore light grade pipe for GI wire protection and funnel including 40mm thick RCC slab cover and testing on completion all as specified and as directed.

S&F GI bracket for street light of 32mm bore GI pipe (medium grade of length 1.5 meter), bend to shape including providing2x pairs of MS flat iron clamp (of suitable size, made out of 40mm x 5mm mild steel flat) with nuts, bolts and washer of suitable size, including applying two coat of red oxide primerand one coat of aluminium paint complete all as specified and directed.

Supply and fixing LED bldg security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete making all necessary connection with suitable capacity of 3 core circular cable complete all as specified and directed.

M&L for 1100 volts grade heavy duty cable with PVC insulated aluminiuum stranded conductor served with an inner sheating of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 mtr apart including 4mm suspention wire one twin core 16 sqmm solid conductor all as specified and directed.

Supply, laying, fixing, passing through pipe or laid in trenches and testing underground XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross section area 2 core 10 sqmm all as specified and directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtrs in depth for laying of cable, fixing of stay etc 10 Sqm on plan and n exc 1.5 in depth and getting out in hard/dence soil complete all as specified and directed.

Returing, filling in incl spreading, levelling watering and well remming in layers n.exc 25cm width, Complete all as specified and directed.

M&L for sand cushioning to underground cables using new dry river sand laid in trenches 8cm thick below the cable and 15cm thick above the cable after laying and stretching the cable complete, punned to 18cm, complete all as specified and directed. Note : Punned thickness of 18cms shall be measured for payment.

M&L Un-reinforced precast factory made concreate cable covers, class LV type-I, with flat size 250x150x40 mm Complete all as specified and directed.

Supply, Install Testing & Commissioning of self supporting totally enclosed double door at front, LT feeder piller compartmentalised design, dust and varmin proof of size 600 mm(Height) x 600 mm(Length) x 450 mm(Width) suitable for 440 Volt 3 phase 4 wire system made out of 3.15 mm thick CRCA sheet and built upon regid frame work having front and rear hinged doors with neoprence rubber gasket including danger plate, earthing strip point and, ventilation louvers at the rear side, bottom detachable gland plate complete with suitable size of Zinc/Cromium plated and nuts, bolts; and washers etc. The pannel shall be synthetic enamelled painted and the control circuit diagram shall be with colour code solid conductor copper 1.5 sqmm cable for easy identification including incomming/outgoing cable holes at the bottom, complete after taking down the old unserviceable one. The Panel shall be emmbeded with 75 x 6 mm MS Angle Iron frame and to be grouted with PCC foundation (1:2:4 ) type B2 upto a height of 50 cm from normal ground level complete all as specified and directed and comprising of the following :- (a) Aluminium bus bar 200 amps - 04 Nos, supported with suitable size of heavy duty porcelin stand lock with suitable size of brass nut, bolts and washer with heat shrinkable PVC sleeving. The bar shall be colour coded (red, yellow and blue) for three phases and black for neutral. (b) MCB of SPN, 63 A, 10 KA, with breaking capacity of 25 KA, Make : L & T/Havells - 01 No

item no 62.00 contd... (c) MCB of SP, 06 to 32 A, 10 KA, Make : L & T/Havells - 02 No (d) LED Indicating lamps for Main Supply indicating R', Y' B' - 01 Set of 3 (e) Digital Voltmeter (Make AE/L&T) - 01 No (f)Current Transformer having Ratio 400/5, 15 VA - 01 Set of 3 (g) Digital Ammeter ( Make(AE/L&T) - 01 No

Supply and laying/fixing, GI pipe medium grade 40 mm bore (dia)including all type fittings fixed on walls/to poles with clamps /laid in trenches as cable protection all as specified and directed.

Supply, installation and testing LED Solar security light fitting 36 Watt alongwith panel capacity 100 W 1 No for 12 volt lightening crystalline silicon adding aluminium frame, water proofing IP-68 automatic light control system switch on automatically with light sensor, over charging / discharging protection, reverse, connection, protection, indication, lamp for charging ON 'green' and low battery 'Red', hot dip galvanized platic coated steel Q235 tampered pole 6 mtr height complete. (Excavation, earth work & PCC shall be measured separately)

M&L for cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) for base of foundation of pole / stay including form work etc. all as specified and as directed.

M&L for PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in coping of pole, including necessary form work complete all as specified and directed.

M/S MOHD MUSSA

MEHDI ALI