Supply, Installation and Commissioning (on turnkey basis) of CNC Portal Wheel Lathes (3 Nos) with industry 4.0 / Remote Diagnostic features at Wagon depot/BPA of SC Division, Wagon depot/DKJ of SC Division, Wagon depot/NLPD of GUNTUR Division and CNC Surface wheel lathe (01 No) with industry 4.0 / Remote Diagnostic features at Carriage Workshop shop/Lallaguda.

6.4 Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where V= Advertised value of the tender in crores of Rupees. N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of 'total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderer shall submit details of contractual payments received as per Annexure VI, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant / Certificate from Chartered Accountant duly supported by Audited Balance Sheets.

6.2 Technical Eligibility Criteria: a) The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender. b) (1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, Mechanical Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (2) This composite work will have Mechanical Component, Civil Component and Electrical Component as indicated in para 6.3. Note : Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organization, work experience certificate issued by Public listed company having average annual turnover of Rs.500 crores and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.

6.3 'Similar nature of work' in Technical Eligibility Criteria detailed above is defined as works involving: a) Mechanical Works - Mechanical Engineering works involving design, manufacture, supply, installation, commissioning and proving out of CNC Surface Wheel Lathe or CNC Under Floor Wheel Lathe or CNC Tandem Under Floor Wheel Lathe or CNC Portal Wheel Lathe with industry 4.0 / Remote Diagnostic features having capability to machine Wheelsets of Rolling stock for railway application. "However, the track gauge and wheel diameter of the machine supplied may vary". b) Civil Works - Civil Engineering works involving Construction of building and Pre-Engineered industrial shed including foundation and track work. c) Electrical works- Electrical works involving electrification of industrial sheds and buildings and supply and lying of LT/HT cables etc.

6.3 Note : 1. The tenderer should provide satisfactory evidence, to show that machine is from a reputed manufacturer who must have manufactured, supplied and commissioned successfully by themselves at least any two CNC Surface Wheel Lathe or CNC Under Floor Wheel Lathe or CNC Tandem Under Floor Wheel Lathe or CNC Portal Wheel Lathe for railway application in past five years from the original date of tender opening. "However, the track gauge and wheel diameter of the machine supplied may vary". These machines should have worked satisfactorily at least for 2 years from the date of commissioning. User's performance certificates of the machines must be attached in the offer to substantiate their claim. The performance certificates shall not be older than 12 months from the original date of tender opening. 2. Indian manufacturers are required to quote directly and no authorization to any agent by them shall be acceptable. 3. In case of machine sourced from foreign OEM, the machine should be of similar / higher capacity and the OEM should have supplied at least one (1) machine to country other than the OEM's country supported with credentials furnished by the user. The credential from the user should be submitted duly notarized by the Indian Embassy of the user's country and if the credentials are in a language other than English, then English translation of the same credentials duly notarized by the Indian Embassy of the user's country should be submitted along with the offer. The certificates of End users should not be older than one year from the date of closing of the tender and (machine) must have worked for minimum one year since the date of commissioning. 4. Documents in support of the Eligibility Criteria for M&Ps, as indicated herein, and also in support of the credentials of the bidder for the Technical Eligibility Criterion, and Financial Eligibility Criterion must be submitted in the proforma enclosed at Annexure V and VI failing which tender is liable to be rejected, without any correspondence. The term 'Railway Workshops' here includes Production units and Rolling Stock maintenance facilities like depots / loco sheds. 5. Bidders must note that credentials submitted to substantiate bidder's claim for fulfillment of eligibility criteria are liable to be referred to banks, Registrar of Companies, tax authorities etc. for authentication. The purchaser shall not be liable for any inconvenience or loss / damage to the bidder on this account. 6. Contractual payment received by a Member in an earlier JV firm shall be reckoned only to the extent of the concerned member's share in that JV firm for the purpose of satisfying compliance of the above-mentioned financial eligibility criteria in tender under consideration. 7. Completion Certificate for the work done by the bidders for creation of facility for self-utilization or for a sister concern shall not be considered. 8. For the purpose of qualifying the eligibility criteria in the present tender following are the three distinct components of advertised work (including CAMC), namely i. Supply, installation and commissioning of machinery & plant (excluding CAMC) ii. Civil Engineering Work iii. Electrical Engineering work Note: In the absence of support documents as indicated above, the offer shall be treated as incomplete and unresponsive.

Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

GST is inclusive in tender value