Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.2 LAccepted-AOC | L1 | Accepted-AOC accept | |
| 2 | L2₹19.7 L+₹54,485.10 (2.84%)Rejected-Finance 06 DUDHI SONBHADRA 231208 | DUDHI | SONBHADRA | UTTAR PRADESH | 231208 | L2 | Rejected-Finance Higher | |
| 3 | L3₹21.6 L+₹2.5 L (12.8%)Rejected-Finance | L3 | Rejected-Finance Higher |
Tender Value
₹24.0 L
EMD Value
₹48,000
Closing Date
28 Jan 2023, 1:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer Saryu Nahar Khand 1 Gorakhpur
Executive Engineer Saryu Nahar Khand 1 Gorakhpur
Repair and Maintenace of Sub Divisional Office and Ziledari Office of Saryu Nahar Khand-I, Gorakhpur
2023_UPIDC_768494_4
04/EE/2022-23
Open Tender
Civil Works
Item Wise
90 days
Gorakhpur
As per Bidding Documents
2 documents required · 2 mandatory
₹854
₹48,000
4 Mar 2023
23 Jan 2023
28 Jan 2023
23 Jan 2023
28 Jan 2023
23 Jan 2023
Amount
Dismantling of old existing damaged plaster/tiles with plaster including disposal of malba within 60 memer as per direction of Engineer-in-charge complete in all respect.
15mm cement plaster in 1:4 cement and chopan sand mortar including cost of all material labour and T&P etc. required for proper completion of work.
Distempering two coat of oil bound distemper of approved make of Berger, Johnson & nicholsen, Shalimar, Asian, Nerolac over one primimg coat on cement primer on new surface after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even with plaster of paris and sand papered smooth including cost of all material, labour , T&P etc. required for proper completion of work.
P/Laying 6 mm thick china glazed wall tiles with 1:3 cement mortar with polishing as per direction of Engineer-in-charge complete in all respect.
P/Laying 6 mm thick china glazed floor tiles with 1:3 cement mortar with polishing as per direction of Engineer-in-charge complete in all respect.
Supplying and fixing masquito proof jali having 5 mess in each cm of 24 gauge.
P/F Fly proof galvanized M.S. wire gauge to doors with avg width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete.
Supplying and fixing 40 mm thick commercial quality flush door complete in all respect.
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)
Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. squareTube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer- in-Charge.
Providing and fixing door shutters in existing door frames with 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter).
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 21.1.2.2 Powder coated aluminium (minimum thickness of powder coating 50 micron
Providing and fixing sal wood door frames complete in all respecr as per direction of Engineer-in-charge.
Supplying and fixing 40 mm thick commercial quality flush door complete in all respect.
Painting two coat of synthetic enamel paint on old wooden surface with superior quality approved make including cost of all material, labour , T&P etc. required for proper completion of work.
Dismantling of old damaged existing wearing coat on roof including disposal of dismantled material within 60 meter as per direction of Engineer-in-charge complete in all respect.
Laying 25 mm thick wearing coat of R.C.C. 1:1.5:3 with 10 mm to 20 mm size Dalla grit and Kanahar sand not less than 2.2 F.M. and also with nominal reinforcement of 50mm x 50mm 10 MS gauge wire mess including cost of all material labour and T&P etc. required for proper completion of work.
P/F 20 mm dia concealed galvanised mild steel tubes (medium grade) I.S. 1239 (Part-1) complete with fitting and clamps, including cutting and making good the surface or wall etc. complete in all respect. (internal works).
P/F sand cast iron socket & spigot soil, waste, drainage and ventilating pipes (lead chaulked joints to be measure & paid seprately) complete in all respect. (a) 100 mm dia.
(b) 75 mm dia.
Providing to lead chaulked joints to cast iron soil, waste, drainage and ventilating pipes and fittings including testing of joints complete in all respect. (a) 100 mm dia.
(b) 75 mm dia.
P/F cromium plated fittings with all materials as per direction of engineer-in-charge complete in all respect. (a) 15 mm dia concealed stop cock.
(b) 15 mm dia bib cock.
(c) 15 mm dia angle valve.
(d) 15 mm dia pillar cock.
(e) 600 x 20 mm wall rail with bracket.
(f) Soap dish with bracket.
(g) 100 mm dia jali for nahani trap.
(h) 32 mm dia brass waste for basin.
(i) 100 mm dia shower rose.
P/F 450 mm x 15 mm nominal PVC connection pipe as per direction of engineer-in-charge complete in all respect.
P/F PVC waste pipe for basin as per direction of engineer-in-charge complete in all respect.
P/F 580 mm size white glazed earthern ware Orrisa pan of approved quality including cost of all material complete in all respect.
P/F 10 litters low level PVC cistern of approved make complete with all assecessories and fittings.
P/F 550 mm x 400 mm wash basin with holes for pillar tap with C.I. or M.S. bracket including cutting hole and making good the same but excluding fitting fittings.
P/F 900 mm x 450 mm size mirror.
E/W in filling by powere transport within 1 Km. including excavation,loading, unloading, stacking and manualy compaction and dressing including all lift complete in all respect.
M/S YASH ENTERPRISES
DINSH SINGH
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .