Loading
Loading…
Loading…
Tender Value
₹10 L
EMD Value
₹20,000
Closing Date
9 Oct 2026, 4:00 pm
Executive Engineer
R and B Division Karan Nagar Srinagar
Construction of Boundary Wall for Construction of ST/ G and B Hostels for Girls (PG/UG) Rampora Chattabal Tehsil Central Shalteng Srinagar.
2026_PWDJK_326358_1
etendering NIT 43 Karan Nagar Srinagar
Open Tender
Civil Works
Percentage
30 days
Chattabal
Please refer Tender documents.
4 documents required · 4 mandatory
₹600
Executive Engineer
₹20,000
28 Sept 2026
28 Sept 2026
10 Oct 2026
28 Sept 2026
9 Oct 2026
28 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil. 1 meter from cutting edge | 53.02 | Cum | 479.3 | ₹25,412.49 |
| 2 | Providing & laying of stone soling hand packed in foundation and plinth including ramming, watering, compaction & lead lifts all carriages upto site of work complete job; All inclusive. | 13.25 | Cum | 1,000 | ₹13,250 |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) | 37.51 | Cum | 5,733.6 | ₹2,15,067.34 |
| 4 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded | 2,564.63 | Kg | 138.2 | ₹3,54,431.87 |
| 5 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 520.45 | Sqm | 706.5 | ₹3,67,697.93 |
| 6Carriage of materials by way of mechanical transport including loading unloading leads lifts from source to site of work complete job. | |||||
| 6.01 | Sand and Aggregates for an average lead of 20Kms | 60 | Cum | 409.94 | ₹24,596.4 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.58 MB
BOQ_1103786.xls
BOQ • 0.38 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .