REPAIRS TO COMPOUND WALLS, SECURITY WALLS, BARBED WIRE FENCINGS, CHAINLINK FENCINGS, GATES, FOOT PATHS, HARD STANDINGS UNDER GE BELGAUM

Amount

M&L for plain cement concrete 1:4:8 type D2, using 40mm graded stone aggregate in foundation, filling, mass concrete, levelling courses and sub bases all as specified and directed.

M&L for plain cement concrete 1:4:8 type D2, using 40mm graded stone aggregate in foundation, filling, mass concrete, levelling courses and sub bases including demolition of existing unserviceable concrete of any description and making good the distured surfaces all as specified and directed.

M&L for plain cement concrete 1:3:6 type C1, using 20mm graded stone aggregate in surface channels, drains, etc. including necessary form wok and moulds including demolition of existing unserviceable concrete of any description and making good the distured surfaces all as specified and directed.

M&L for plain cement concrete 1:3:6 type C1, using 20mm graded stone aggregate in copings, bed blocks including necessary form wok all as specified and directed.

M&L for plain cement concrete 1:3:6 type C1, using 20mm graded stone aggregate in copings, bed blocks including necessary form wok including demolition of existing unserviceable concrete of any description and making good the distured surfaces all as specified and directed.

M&L for pre-cast cement concrete solid block masonry, exc 10cm width, blocks cast in PCC 1:3:6 type C0, using 12.5mm graded stone aggregate, set in CM 1:6 including demolition of existing unserviceable masonry of any description and making good the distured surfaces all as specified and directed.

M&L for providing precast cement concrete louvres and jallies, 1:2:4, Type B0, using 12.5mm graded stone aggregate, 35mm thick (measured solid) including all mouldings but excluding frame, set in cement mortar 1:4 all as specified and as directed.

M&L for providing precast cement concrete louvres and jallies, 1:2:4, Type B0, using 12.5mm graded stone aggregate, 35mm thick (measured solid) including all mouldings but excluding frame, set in cement mortar 1:4 ncluding dismantling existing unserviceable RCC jallies of any description and size all as specified and as directed.

M&L for providing pre-cast reinforced cement concrete 1:2:4, type B-1, using 20 mm graded stone aggregates as in posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area exc. 100 and n. exc 250 sq. cm with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed including taking out existing fencing posts of any description and size all as specified and directed. Note :- Reinforcement shall be measured and paid separately.

M&L for Reinforced Cement Concrete 1:2:4 type B1, using 20mm graded stone aggregate in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns etc. including demolition of existing unserviceable concrete of any description and making good the distured surfaces all as specified and directed.

M&L for Reinforced Cement Concrete 1:2:4 type B1, using 20mm graded stone aggregate in columns, pillars, piers, posts and struts including demolition of existing unserviceable concrete of any description and making good the distured surfaces all as specified and directed.

M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 including demolition of existing unserviceable brick masonry built in cement mortar in any position below or above ground level and making good disturbed surfaces all as specified and as directed.

M&L for use of form work to sides of concrete foundations, column footings, plinth beams and similar works for rough finished flat concrete surfaces, vertical or to batter, all as specified and directed

M&L for use of form work to sides of pillars, posts, struts, columns, etc. for fair finished concrete surfaces, square, rectangular or polygonal all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for column, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia all as specified and directed.

All as described in item No. 15 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.

M&L for mild steel round bars 10mm dia and over cut to length bent to shape required including cranking bending, spirally for hooping for column, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia fixed in repairs all as specified and directed.

M&L for rolled mild steel posts and struts in fencing and similar work conforming to Fe-290 Gde E-165 including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets for securing wire mesh etc. including dismantling of existing unserviceable posts or struts any section, including taking out embedded portion and making good disturbed ground all as specified and as directed.

M&L for mild steel framed work as in gates of angle or other section with gusset plate, rails, braces etc complete, prepared for hanging or sliding with and including either hook or hinges and hanging fastening and fixing complete conforming to Fe 410W (Gde E-250) including dismantling of existing unserviceable mild steel sections of any section, including making good disturbed surfaces all as specified and directed.

M&L for mild steel framed work as in ornamental or intricate designed gates of angle or other section with gusset plate, rails, braces etc complete, prepared for hanging or sliding with and including either hook or hinges and hanging fastening and fixing complete conforming to Fe 410W (Gde E-250) including dismantling of existing unserviceable mild steel sections of any section, including making good disturbed surfaces all as specified and directed.

S&F mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe-290 Gde- E-165 including dismantling existing unserviceable mild steel framed works of any description and size and making good disturbed members all as specified and as directed.

S&F in repairs galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. all as specified and directed.

Restraining and resecuring only the existing barbed wire of any description, including making good staples etc. all as specified and directed.

S&F 600mm dia concertina coil fencing conforming to IS 4454 Part-I, made out of 2.6mm (+ or - 2%) dia of steel core wire galvanised and with anti rust coating (Black colour), with coils not less than 51 turns for an effective stretched length of 6m with 2 handles, duly placed on existing supports over security/ compound walls and tied with 2mm dia binding wire and the spikes at the ends of coils embedded into PCC coping all as specified and as directed. Note: PCC coping shall be measured and paid separately.

Supply only chain link fencing, any mesh, size and type all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type, fixed to any type of standards, rails, straining bolts, etc. including provision of binding wire including takng down existing unserviceable fencing mesh of any description and size all as specified and directed.

M&L for 25 mm thick plain cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregate as in sub base for floor including demolition of existing unserviceable PCC flooring of any description/ thickness and making good the disturbed surfaces all as specified and directed.

M&L for 100 mm thick plain cement concrete 1:2:4 type B2 using 40mm graded stone aggregate as in paving, hard standing etc. and finishing the concrete surface even and fair without using extra cement and making impressions of expanded metal while the concrete is green including demolition of existing unserviceable concrete of any description all as specified and directed.

M&L for machine cut granite stone slab, premium quality, any colour, 18 to 19mm thick, set and jointed with neat cement slurry laid over and including 15mm thick backing coat in cement mortar 1:4 and pointed in white cement (1:2) mixed with colouring pigments to match with the shade of slab, as in claddings, etc. including provision of necessary concealed type epoxy coated 'L' angle brackets/ clips grouted into wall @ 300mm c/c for holding the slabs including rubbing and polishing including dismantling of existing unserviceable stone tiles alongwith cement mortar bedding and removing rubbish off the premises all as specified and directed.

M&L for rubber coated chequered cement concrete tiles 30cm x 30cm x 25mm thick, with grey cement and pigments and glossy finish on top, set, jointed and pointed in neat cement slurry, laid over and including 15mm thick screed bed in cement mortar 1:6 as in pathways, etc. including dismantling of existing unserviceable stone slab/tiling alongwith cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and directed.

M&L for 55-60mm thick machine pressed precast concrete interlocking coloured paver blocks, M-35 grade, any shape and size with glossy finish on top, confirming to IS 15658-2006 laid over and including 50mm thick sand filling including watering and consolidation including dismantling of existing unserviceable paver blocks and removing rubbish off the premises all as specified and directed.

M&L for 80mm thick machine pressed precast concrete interlocking coloured paver blocks, M-40 grade, any shape and size with glossy finish on top, confirming to IS 15658-2006 laid over and including 50mm thick sand filling including watering and consolidation including dismantling of existing unserviceable paver blocks and removing rubbish off the premises all as specified and directed.

M&L for plain cement concrete 1:3:6, type C1, (Using 20 mm graded stone aggregate), 75mm thick as in plinth protection, finishing the surface fair and even, in panels & filling joints with mortar, etc. including demolition of existing plain cement concrete plinth protection of any description and thickness and making good disturbed surfaces all as specified and directedall as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or block masonry or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or block masonry or concrete surfaces finished even and smooth without using extra cement including taking down existing cement plaster and hacking for key, scrubbing down with water, etc. complete all as specified and as directed.

M&L for GI tubes, light grade, 80mm bore, as in supports for light fittings/ cable protection, fixed on Pillars with necessary MS clamps, bolts, nuts, washers, etc. all as specified and as directed.

M&L for two coats of cement based paint, any colour, on newly plastered surfaces of walls, pilasters, cornices, etc., over a coat of alkali resistant primer including necessary preparation of surfaces all as specified and directed.

M&L for one coat of cement based paint, any colour, on old cement painted surfaces of walls, pilasters, cornices, etc., including necessary preparation of surfaces all as specified and directed.

M&L for one coat of synthetic enamel paint on old painted steel surfaces of any description over 10cm width or girth including necessary preparation of surfaces all as specified and as directed.

M&L for preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

A. N. Kalbhavi

ASHIRWAD ELECTRICALS

RAJARAM TAYAPPA DANDAGALKAR

M/S VISHWAROOP ELECTRONICS AND ELECTRICALS

Vinod Enterprises

M/s B C CHOUGULE

M/s. N D KALING

M/s. J P CONSTRUCTIONS

SHRI.H.R.PATIL

ASHOK M RAJGOLKAR

M/s.Y.N.PATIL

M/S MAHADEV M PATIL