8825 REPAIRS/REPLACEMENT OF FLOORING, WOODEN WALL PANELLING, TEMPORARY OPEN BADMINTON COURT, BATHROOM TILING GATE, JOINERY, PLUMBING AND SANITARY FITTINGS ETC AND PERIODICAL SERVICES AT NADFM UNDER AGE BR I SOUTH PUNE

Amount

Demolition of brickwork or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with fly ash Bricks straight or curved on plan exec 6 mtr mean radius with moduler bricks in CM 1: 6 complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exceeding 15 cm thickness(above or below ground level) and disposal of debris and rubbish to out side the MD land complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar complete all as specified and as directed.

M&L for PCC in foundation in 1:4:8 type D2 (40mm graded agg) in foundation filling, sub base and mass concrete complete all as specified and as directed.

M&L for PCC type B-1, 1:2:4 ( 20mm graded agg) 50mm thick as a floor finished complete all as specified and as directed.

S&F MS framed work such as grills ornamental designe type with ends of bars shouldered or riveted, or forged into spikes, framed guard bars or similar work using steel section conforming to Fe-410 or Fe-310 complete all as specified and as directed.

M & L for preparation of new steel surfaces & applying two coats of synthetic enamel to steel surfaces of any description over 10 cm in width or girth not otherwise described, over a coat of red oxide primer complete all as specified and directed.

S&F in repairs of 25 mm dia stainless steel curtain rod including fancy type brackets pair complete all as specified and as directed.

S&F Stainless steel pipe SS-304 railing decorative baluster Med Grade in Stairs incl all fittings and accessories all as specified and directed by Engr-in-charge

M&L for 3mm thick Veneered decorative fixed with screws and fevicol of (veneer Century Make or equivalent as to be fixed in raised wall paneling or flush shutters etc including malamine polish over veneer plywood complete all as specified and as directed. (Make : Kitply/Century Plywood/Green Ply)

S&F 12mm thick plywood, grade BWR, type BB,commercial faces,fixed with screws to timber frame work complete all as specified and as directed.

S&F Plain fillets in 2nd class hard wood,sectional area exc 13 & nexc 25 sqcm,wrought,fixed with screws in repairs etc complete all as specified and as directed.

S&F in repairs 2nd class hard wood of sec area 8 Sqcm to 12 Sqcm round beading to top & bottom of wall panneling work with melamine polish for architect look fixed with screws etc. complete all as specified and as directed.

Material and labour for prepaparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint of approved shade over a coat of pink primer complete all as specified and as directed.

Material and labour for completely removal of existing treatment on surface of walls and applying of two coats of texture paint over alkali resistant priming paint & internal 2 mm thick wall care putty etc all as specified & directed.

Complete removal of existing treatment and applying two coats of luster paint white or tinted on walls complete all as specified and directed.

M & L for preparation of surface of any description (plastered and old decorated) over 10cm width or girth including removing existing treatment completely and applying two coats of Dulux Weather shield paint complete all as specified and as directed.

M & L for preparation of surface of any description (plastered and old decorated) over 10cm width or girth and applying one coat of Apex Ultima Weather shield paint complete all as specified and as directed.

M&L for preparation of old decorative surfaces of wall incl, cornices (plastered or unplastered) of any description, sand papered , and dusted and applying two coat of Oil Bound distemper complete all as specified and as directed.

All as per item No 20.00 above but on ceiling complete all as specified and as directed.

M&L for complete removal of old decorative surfaces of any description and applying 1 mm thick wall care putty on wall/ceiling complete all as specified and as directed.

M & L for french polishing on surfaces of any description , exceeding 10 cm width or girth over a coat of wood filler including cleaning and preparation of old wooden surfaces complete all as specified and as directed.

Material and labour for prepaparation of old wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint of approved shade complete all as specified and as directed.

M&L for preparation of old painted wooden surfaces exe 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

All as per item No 25.00 above but applying one coat on steel surfaces complete all as specified and as directed.

Material and labour for 25mm thick PCC(1:2:4) type B-1 using 12.5mm graded stone aggregate below flooring as a levelling course in floor complete all as specified and as directed.

Material and labour for glazed ceramic coloured tiles of size 300mmx600mmx7mm thick on vertical surfaces such as skirtings,dados and riser to steps ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10mm thick rendering in cement mortar(1:4) complete all as specified and as directed. (Make : Johnson Tiles/Kajaria/Orient Bell)

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, ,over and including 15mm thick screed bed in cement mortar(1:6) complete all as specified and as directed. (Make : Johnson Tiles/Kajaria/Orient Bell)

M&L coloured joint free Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm, but not exc .42 sqm in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match (light colour) including laid over 15 mm thick screed bed in CM (1:6) complete all as specified and as directed. (Make : Johnson Tiles/Kajaria/Orient Bell)

M&L Machine cut cudappah stone slab 20-25mm thick as in kitchen platform base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for granite (of any type) work (table rubbed and polished) 18-20mm thick in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over and including 15mm thick screed plaster in cement mortar(1:6) complete all as specified and as directed.

Rounding (half) to edges of stone slab one edge, such as in steps, cooking platform and other similar situations complete all as specified and as directed.

Taking down cement mortar plaster of any description on wall including racking out joints,hacking for key,scrubbing down with water etc complete all as specified and as directed.

Material and labour for 10 mm rendering in cement mortar (1:6) on other than fair faces of brick wall surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of OBD over a coat of alkali resistant priming coat & smooth surface with internal 1mm thick wall care putty complete all as specified and as directed. (Make : Nerolac/Jenson & Nicholson/Asian Paints)

Taking down wooden frame with shutter without taken off shutter from the frame, not exceeding 1.5 sqm each including removing from site complete all as specified and as directed.

Taking down wooden frame with shutter without taken off shutter from the frame,exceeding 1.5 sqm but not exceeding 4 sqm each including removing from site complete all as specified and as directed.

Taking down shutters of any description exceeding 1 sqm but not exceeding 2 sqm each including removing from site complete all as specified and as directed.

Supply and fixing of 30 mm thick,factory made, gauged and skeleton shutters from 1st class hard wood (Hollock), open rebated,prepared to receive glass, gauge etc (without sash bar), edges of framing plain, chamfered or rounded,fitted with cut & mitred beads for securing glass, gauge etc, size of members of shutters as specified in SSR-2009 Part-I, members kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed.

Supply and fixing of 35mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides,(the over all door shutter shall conform to IS--1003)(Part-I) complete all as specified and as directed. (Make : M/S A1 Teak Products, Indore / M/s Goel Brothers, Raipur)

Material and labour for prepaparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint of approved shade over a coat of pink primer complete all as specified and as directed.

Supply and fixing of stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, galvanised wire, screws fixed to aluminium grills or wooden frames etc complete all as specified and as directed.

Supply and fixing butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised 100mm size fixed complete all as specified and as directed.

S&F Aluminum anodized fancy type barrel tower bolt of extruded section 200mm long complete all as specified and as directed.

S&F 150 mm size aluminum handles decorative type complete all as specified and as directed.

S&F in repair 375mm long Brass, sliding door bolt decorative type with sand or die-cast brass hasp,staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed door shutter complete all as specified and as directed.

S&F mortice lock size 175mm brass body with 7 lever of Godrej or of equivelant complete all as specified and as directed.

S&F 150mm overall length of cover plate brass body door stopper fancy type heavy duty and tongue with hard drawn steel spring complete all as specified and as directed.

Supply and fixing of MS double action spring hinges of size 125mm type with steel wire spring, stove enamelled black complete all as specified and as directed

S&F in repair hydraulic door closer aluminium body suitable for door shutter of 850 to 1000mm in width and of weight between 61 to 80 Kg of approved make of ISI Marked complete all as specified and as directed.

M&L for providing and fixing CP toilet fitting in repairs as specified and as directed by the Engr -in-Charge for the following:-.

Bib taps CP 15mm bore fancy type with wall flange conforming to CAT No. CON- 037 Jaquar/ 9206 (CASA) pf Prayag or of Equivalent make specified here in after.

Soap dish CAT No. ACN-1131N Jaquar/BA-259 of Prayag or of Equivalent make specified here in after.

CP towel rail 20mm dia and 600mm long including brackets conforming to CAT No. ACN-111N of Jaquar/ BA-20 of Prayag or of Equivalent make specified here in after.

Health faucet CAT No. ALD-583KN of Jaquar/ BEA-85 of Prayag or of Equivalent make specified here in after.

Angular type stop cock conforming to CAT No. 053 of Jaquar/ 9210 of Prayag or of Equivalent make specified here in after

CP toilet paper holder conforming to CAT No. ACN-1151N of Jaquar/ BA-38 of Prayag or of Equivalent make specified here in after.

CP 15mm bore concealed stop cock with long neck conforming to CAT No. CON-069 of Jaquar or of equivalent make specified here in after.

CP towel ring round with round flange conforming to CAT No ACN-1121 BN of Jaquar/9218 of Prayag or of Equivalent make specified here in after.

CP wall mixer 3 in 1 including telephone shower for 15mm bore of pipe conforming to CAT No.CON 281 and HSH -1939 of Jaquar/ PIS-70 and BH-73 of Prayag and or of Equivalent make specified here in after

2 way bib cock with wall flange conforming to CAT No. CON 041N of Jaquar or of Equivalent make specified here in after

S & F vitreous china wash under counter basin(colour), ovel type conforming to CAT No. CNS-WHT-705 of "Jaquar" or of equivalent make specified here-in-after set in and CP waste coupling and CP bottle trap conforming to CAT No. ALD-709 and ALD-769 and Pillar cock long neck with aerator CAT No CON -021KN of "Jaquar" or of equivalent make all as specified and directed by Engr-in-Charge.

S & F in repairs, vitreous china wash down floor mounded single piece water closet pan with UF seat cover, hinges, fixing accessories set, cistern fittings, trap distance(mm) S-300, 2.5/4.2 lit flusing, Rim less, Tomado flushing, Size 360 x680x 750 Ivory coloured , 'P' or 'S' type, conforming to CAT No OPS-WHT-15851SN of "Jaquar" or of equivalent make specified here-in-after complete.

S&F in repairs vitreous china, squatting pan, 'Orissa' pattern, size 580 x 440mm white, with integral foot rest, including concrete bedding and PVC flushing cistern 10 Ltr capacity including all internal fitting, inlet, outlet pipe connections etc. complete all as specified and directed.

S & F in repairs vitreous china wash basin white flat back of size 550mm x 400mm including 15mm dia CP pillar tap,CP waste coupling 32mm, chain and plug and PVC waste pipe including CI brackets, etc. complete all as specified and directed by Engineer-in-Charge

S&F in repair PVC low level flushing cistern 10 ltrs capacity make ISI or equivalent incl all internal fitting, pair of bracket, including inlet/outlet PVC pipe connections etc complete as directed by Engr-in-Charge.

S&F in repairs flush pipe of polyethyline of low or high density or PVC 32mm dia for low level cistern complete all as specified and as directed.

S&F12mm thick bathroom shower glass partition with stainless steel agrangment (Jaquar) complete all as specified and as directed.

Supply and fix in replacement rotational moulded polyethylene water storage tanks in replacement (vertical cylindrical with closed top) double layered ISI marked with existing inlet, outlets & provision of washouts, (vent pipe all as directed of following capacity including all new tank nipples of suitable following size :- (Note:-Old unserviceable water tank deposited to MES store)

S&F in repair Gun-metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed of following bore of pipe :-

S&F in repair unions, brass to connect iron to polyethylene and fixed with following bore dia of pipe :-

S&F in repair ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed with following dia :-

Taking up or down GI water tubing with fittings including cleaning for re-fixing or removing from site of size :-

15 mm bore

20 mm bore

Supply and fixing of GI water tubing,medium grade with fittings, fixed to wall and ceiling (concealed) or laid in floor of size :-

15 mm bore

20 mm bore

Cutting chases in brick wall, girth not exceeding 10 cm for concealing water tubing and making good in cement mortar (1:3) complete all as specified and as directed.

S & F factory made solid PVC moulded door shutters 28 to 30 mm thick (stiles) with 2,4 or 6 raised panels design with 2mm thick moulded PVC sheet on front face & 2 mm plain colour PVC sheet on back face,supplying & fixingued solid in frame at site as per specification & drgs with particle board core etc.including 3mm thick, 1st Class HW (TW) beading all around on edging and welding 3 Nos MS but hinges size100mm with existing MS frame all as specified and directed by Engr-in-Charge

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube,supply & fixing in opening as mentioned in Item No. 8095 of SSR Part-II complete all as specified and as directed

Demolition of AC/ CI pipe of 100 mm dia, set in cement mortar,fixed in any position complete all as specified and as directed.

Demolition of AC/ CI pipe of 75 mm dia ,set in cement mortar,fixed in any position complete all as specified and as directed.

Supply and fixing of cast iron (spun) soil,waste and vent pipe 100 mm bore, any length with or without ear with cement joint,fixed to walls complete all as specified and as directed.

Supply and fixing of cast iron (spun) soil,waste and vent pipe 75 mm bore, any length with or without ear with cement joint,fixed to walls complete all as specified and as directed.

Supply and fixing of CI bend 100 mm bore with oval accessories door complete all as specified and as directed.

Supply and fixing of CI bend 75 mm bore with oval accessories door complete all as specified and as directed.

Supply and fixing of CI Tee or single branch piece 100 mm bore with oval access door complete all as specified and as directed.

Supply and fixing of CI Tee or single branch piece 75 mm bore with oval access door complete all as specified and as directed.

Supply and fixing of CI vent cowl 100 mm size complete all as specified and as directed.

Supply and fixing of CI vent cowl 75 mm size complete all as specified and as directed.

Supply and fixing of SGSW gully trap 150 X 100 mm size square or round mouthed type complete all as specified and as directed.

Supply and fixing of 75 mm CI Nahani trap with PTMT gratings(minimum weight 250 gm) including jointing to waste pipe fixed in cement concrete(1:2:4) type B1 all as specified and directed.

S&F 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F 100 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed..

S&F 75mm PVC (SWR) bends any radius complete all as specified and as directed.

S&F 100mm PVC (SWR) bends any radius complete all as specified and as directed.

M&L for precast coloured, chequered cement concrete tiles, glossy finish of size 305 x 305mm x 25mm thick, set jointed and pointed in neat cement slurry in floor laid over and including 20mm thick screed bed in CM (1:6) complete all as specified and as directed.

M&L for sealing aluminium window joints by epoxy polymer to avoid leakages from outside& inside at frame/wall junction all as specified & directed.

S&F POP false ceiling with 12 mm thick glass fibre reinforced Gypsum ceiling tiles of ,prima fine fissured micro look white coloured laid over including grid work 600x600mm using GI powder coated “T:” section grid (Silhaute type) as Main 'T' 38 X25 mm , cross 'T" 25x25mm and wall angle 25x25mm grid and 6 mm dia GI suspension wire etc incl over a coat of 1-2 mm thick POP finish complete all asspecified and directed Make-Saint-Gobain, Armstrong,Diamond or Equivalent.)

S&F for 40mm thick wooden planed one side, with butt joints and fixed with nails complete all as specified and as directed.

S&F for MS structural steel work, framed as in trusses, purlins, rafter, post etc. conforming to grade E-250 (Fe-410E, quality A) including shaped washers including necessary cutting required length, notching drilling, riveting and or welding or connecting with nut bolts with angle cleats, fish plat, gusset plate and also erecting in true position complete as directed.

S & F roof sheeting prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified incl dismantling of old sheet.

S&F retro reflective sign board of size made out of 3mm thick acrylic fexible sheet of 3.5m x 1m x 20cm fabricated out of 14 SWG MS sheet frame duly welded /riveted with square pipe of size 25mm x 25mm at height 2.25 meter on 50x50 mm angle iron frame – 02 Nos fixed with PCC 1:2:4 type B-2 (using 40mm graded stone aggregate) of size 45x45x60cm embeded in ground including necessary excavation / earthwork etc. The board shall be painted in stove enameled paint and the front of the frame shall be overall sheathed with blue colour base and letter/symbol shall be written in white colour writing of approved shape including LED 1x20 watt fitting 04Nos with internal wiring complete letters of white colour complete all as specified and as directed by Engineer-in-Charge .

REKHA ELECTRICALS