REPAIRS TO FALSE CEILING ALUMINIUM / UPVC DOOR/ WINDOW OTHER MISC BR WORKS IN OTM ACCN OF 505 ABW UNDER AGE BR I OF GE NORTH DELHI CANTT 10

Amount

Dismantling of plain or corrugated fibre sheeting of any guage as in roof covering including ridges/gutters etc of any description straight or curved at height upto 15mtr complete all as specified and directed.

Dismantling of AC sheet / CGI sheet roof corrugated/semi corrugated of any description including ridges/gutters etc at height upto 15 mtr complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling of wall and ceiling boards any thickness including cover fillets, grid work complete complete all as specified and directed.

S&F structural steel work for rolled sections as in main and cross beams, hips and jack rafters, purlins, running rails and guides for sliding doors, fixed with angles and angle cleats or other connecting plates gde Fe-410-W at any height complete all as specified and directed.

S&F of 0.50mm thick (including coated thickness) pre-colour pre- profiled (Galvalume/zinkalume) curvagated/plain sheets of required colour and design having tensile strength of 550 Mpa as in roof sheeting/sunshade/ wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer / profile maker instruction complete all as specified and as directed.

M&L 6mm thick asbestos cement Sheet corrugated/semi corrugated fixed with ''L' type or 'J' type or cranked hook/bolts at height upto 15mtr complete all as specified and directed.

S&F 2mm thick fibre glass reinforced translucent corrugated sheetings with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed.

M&L for gypsum ceiling board for ceiling prepainted, perforated finish, 600mm x 600mm x 9mm to 9.5mm thick in size, of approved brand/make, laid over and including grid work of size 600mm x 600mm, made out of 0.5mm thick G.I. tee 32mm x 24mm for main, 25x24mm for cross tee and 20 x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle. hung from ceiling using 2mm thick G.I. Suspension wires spaced at 1200mm on main runners including making niches for fans/light complete all as specified and directed.

S&F in repairs POP 12mm thick Seamless calcium silicate ceiling made out of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws having philips head with under head cutter at 200mm center to centre including finishing thr joints of face board with specially formullated jointing compound and 48mm wide fibre tape to provide seamless finish with 12mm thick for seamless false ceiling fixed with screw over and including Gl frame work comprising of Gl perimeter channnel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre / intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete as per manufacturer instruction.

S&F PVC sheet wall lining consisting of 5mm thick colour / printed PVC sheet inclusive of solvent cement and fixing at site including PVC frame as per specifications, complete all as specified and directed.

S&F in repair powder coated aluminium window made of aluminium tubular frame and shutter of section 63.50mm x 38.10 x 1.60mm and style fixed openable horizontal and vertical member of aluminium beading rubber gasket of aluminium fittings such as tower bolts, handle stay and rod and hinges 5mm thick glass etc complete all as specified and directed Note:- Fixtures / fittings of window shutter are deemed to be inclusive in the quoted rate.

S&F in repair powder coated aluminium anodised hollow section door frame and shutter ( swing type ) openable with top rail , style of section 47.62mm x 44.45mm x 1.60mm and lock rail, bottom rail of 101mm x 44.5mm x 1.6mm including jointing cleats, snap beading, glass/ nova pan, gasket for fixing glass/board in panel including 2 nos dish type handle, hinges, tower bolts -02 Nos 150mm in each leaf and screws complete all as specified. Note:- Fixtures / fittings of door shutter are deemed to be inclusive in the quoted rate.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc 1.50 sqm each and removing from site, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm eachand n exc 4 sqm and removing from site, complete all as specified and directed.

Taking down shutter of any description area exc. 1 Sqm and n.exc. 2 Sqm and removing from site, complete all as specified and directed .

S&F pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed..

S&F pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

S&F for 35mm thick factory made, 2nd class hard wood glazed and skeleton shutters open rebeated and prepared to received glass, gauzed, with out sash bar edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of member of shutter as per specified in SSR Part-I section 8, clause 8.24 (a) and for door and fixed with chowkats, chemically pressure treated complete all as specified and as directed.

S&F for 35mm thick 2nd class hard wood plain, framed pannelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board wiyh commercial veneering on both faces. The size of rail and stile as per (IS : 1003 part-I , kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F for 30mm thick flush shutters , solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and as directed.

S&F fibre glass reinforced plastic (FRP) door frames shall be three lagged of cross section 90mmx45mm having single rebae of 32mmx15mm to receive shutter of 30mm thickness. The laminate door frame moulded with fire retardant grade unsaturated polyester resin and chopped mat. Door frame moulded with fire retardant grade unsaturated polyester resin and chopped mat Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs, The frame shall be covered with fiber glass from all sides MS Stay shall be provided at the bottom to seady the frame all as specified and directed.

S&F FRP door shutter shall be 30mm thick glass fibre reinforced plastic (FRP) panelled door shutter of required colour and approved brand and manufactures. Made with fire retardant agrade unsaturated polyester resin moulded to 3mm thick FRP laminate for forming hollow rails and styles with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP panels and confirming to IS-14856-2000

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed.

S&F 12mm thick toughened or tampered glass (tuffen glass) thermal and chemical treated with heavy strength of fine polished edge as in doors with SS long body handle, pivots and locking arrangements of heavy duty accessories. It made from annealed glass via a thermal tempering process and toughening process. The glass compressive strength should be minimum 69 mps itching and cluster work as per sample kept in GE's office complete all as specified and directed by manufacturer's instruction and Engineer-In-Charge.

S&F factory made double rebated extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkat of size 65 x 125mm comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and non toxic additives ( max toxicityindex of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr in charge. Note:- For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made

S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer?In- Charge. Note:- stainless steel butt hinges and necessary S.S screws shall be paid separately)complete all as specified and directed.

M&L for applying two coat of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth complete all as specified and as directed.

Preparation of newly steel surfaces, of any description, over 10 cm width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide complete complete all as specified and as directed.

S&F in repair aluminium (extructed section) Door closer hydraulically regulated, desingnatin No. 3, universal type, suitable for door shutter and fixed complete all as specified and directed.

S&F 100mm long mild steel butt hinges, cold rolled, medium weight complete all as specified and directed.

S&F for 125mm long stainless steel tower bolt of extruded section complete all as specified and directed.

S&F 150mm long stainless steel handles, cast type complete all as specified and directed.

S&F 300mm long aluminium alloy, anodized sliding door bolt with hasp stapple ( bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed.

Hacking out old broken glass (any thickness, size , quality or description) from metal frame including punching or drilling out old glazing pins/ spring clips, nut bolts & fillets at ht upto 15 mtr complete all as specified and directed.

S&F for MS work in bands, straps, supports or stays for RWP, ventilating pipes, gutters including bolts, if reqd hooks (stay), clamps, holdfasts, wall ties, nosing angles, hooks for hanging fans and similar small articles conforming to Fe-290 gde E-165 hight up to 15 mtrs

S&F sheet glass ordinary quality, 3mm thick and glazing with oil putty in square n.exc. 0.5 Sqm in each pane at ht upto 15 mtr complete all as specified and directed.

Demolition of Brickwork or stone/ boulders masonry built in cement or cement lime mortar incl all quions, arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and directed.

M&L for brick work with sub class B bricks of old size, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster of any description & thickness from brick/concrete sufaces of wall/ceiling etc including racking out joints, hacking for keys scrubbing down with water etc complete all as specified and directed.

M&L for rendering 10mm thick in CM ( 1:6 ) on wall/ concrete surfaces finish even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in CM ( 1:4 ) on wall/ concrete surfaces finish even and smooth without using extra cement using WPC compound at any description with necessary scaffolding of any height bldgs etc complete all as specified and directed. Note:- WPC shall be measured and paid separetly.

M&L for 5mm thick plaster on ceiling in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and as directed .

Supply only Liquid water proofing compound complete all as spesified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of oil emulsion distember over a coat of over a coat of cement primer over a coat of JK/Birla wall care putty complete all as specified and directed.

M&L for preparing new surfaces of wall and applying two coats of white wash on ceiling and cornices complete all as specified and directed.

M&L for apply two coats of anti fungal weather coat with acrylic smooth exterior emulsion paint applied 1.67kg/10sqm, of required shade over a coat of primer applied 2.20kg/10Sqm on new surfaces including 2-3mm thick wall care putty and including necessary sacfolding of any height bldg, etc complete all as specified and directed. Make of Arcylic emulsion weather coat paint :- Asian (Apex Ultima) ,Berger (Super coat ) or ICI Dulux (weather shield) .Make of primer :- Asian or Equivalent . Note:- (a) Each stage i.e. preparation of surfaces, application of primer, application of first coat, application of second coat will be got passed from Engr-in -Charge. (b)Written Warranty for four years or as per manufacturer's instructions, whichever is more is required to be furnished by contractor for this item.

M&L for preparation of new plastered surfaces of walls and applying two coat of cement based paint over a coat of cement primer complete all as specified and directed

S&F in repair steel rolling shutters, without ball bearing as specified including top covers anchoring rod, hasp & staple and one shop coat of red oxide primer gear operated type with bevel gear box and crank handle and errected in position complete thickness of laths 1.25mm complete all as specified and directed.

S&F for ball bearing for rolling shutters all as specified and directed.

S&F in repairs 1.25mm thick laths in any type of rolling shutter and in any length complete all as specified and directed.

M&L roughening surfaces of old concrete surfaces by picking sweeping, cleaning old surface and washing down with water to remove dust etc including taking down tarfelt and brushing neat cement slurry @ 3 Kg/Sqm including 20mm thick screeding in CM (1:3) finished even and smooth mixed with water proofing compound (WPC shall be measured and paid separately).

M&L for Water proofing treatment to RCC roof slab, walls, chhajjas etc, shall be carried out as specified below and as directed by Engineer-in-Charge. (A) Preparing plastered surfaces of roof slab, walls, chhajjas etc, by brooming with broom sweeping free from dirt dust etc & evenly applying a coat of approved bituminous primer @ 0.20 Kg/Sqm of area complete all as specified. (B) Laying APP polymer modified approved membrane, non woven, polyester, weighing not less than 3.5 Kg/Sqm with laps & overlaps as specified & joints sealed and applied complete by torch application method all as specified & directed by Engr-in-Charge. Carrying out test by flooding water for 24 hrs for leakage & seepages and rectifying the same to the entire satisfaction of GE. (C) Finally applying a coat of solar reflective bituminous aluminium paint @ 0.15 ltr/Sqm on the top of membrane surfaces complete all as specified & as directed by Engr in Charge.

S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aparture 1.40mm Fixed with stainless steel wire staples and nut bolt including flat iron strips complete all as specified and directed by Engineer-in-Charge. Note:- Rate inclusive wooden /steel/ nut bolts rquired for fixing

S&F of galvanised mild steel wire clothcut to size, 0.56mm nominal dia wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staple complete all as specified .

S&F in repair galvanised mild steel wire clothcut to size, 0.56mm nominal dia wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staple complete all as specified .

M&L for providing 40mm thick cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregates as in floor and finished even and smooth without using extra cement complete all as specified.

Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks and similar work conforming to Fe 290. Gde-E-165 all as specified .

M&L in repairs double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed including taking out the old damaged spring any description and any position and making good all disturbed surfaces to match with adjoining surfaces all as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for vitrified Ceramic coloured dark shade tiles 10mm thick (square/rectengular) polished, area of each tile n. exc 0.36 sqm as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the surface insluding 15mm thick screed bed in CM 1:6 complete all as specified and directed.

S&F non skid ceramic tiles area of each tile exc 0.11 sqm and nexc 0.18sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick secreed in CM 1:6 for bed layer complete all as specifed and directed.

M&L for glazed coloured ceramic tiles in dado/vertical surface (350mm x 250mm x 7 mm/450mm x 350mm x 7mm) thick set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and directed by Engr-in-Charge.

M&L for 10mm thick rendering as backing coat on brick /concrete surfaces in cement mortar 1:4 rough finished on vertical surfaces to receive tiles etc. complete all as specified.

M&L in repair for 60mm thick machine pressed precast concrete interlocking paver block (glossy finish) of M-35 Gde of approved shape, size and colour conferming to IS 15658-2006 and laid over and including 25mm thick sand cushion complete all as specified and as directed.

M&L in repair for 80mm thick machine pressed precast concrete interlocking paver block (glossy finish) of M-40 Gde of approved shape, size and colour conferming to IS 15658-2006 and laid over and including 25mm thick sand cushion complete all as specified and as directed.

S&F in repair for precast cement concrete type B-1 (1:2:4) (20mm graded stone aggregate ) as in kerb and edging to road and footh path, etc including chamfered,weathering, throating etc and setting in CM (1:4) c complete all as specified and as directed.

Preparation of old decorated plastered or unplastered surface including complete removal by brooming down with steel wire brushing, scraping down smoke soot, moulded, moss, efflorscent salt, trading oil and greasy spots and applying two coat of Oil bound distemper on walls over 2mm thick wall putty as specified and directed .

Preparation of old / newdecorated plastered or unplastered surface including complete removal by brooming down with steel wire brushing, scraping down smoke soot, moulded, moss, efflorscent salt, trading oil and greasy spots and Finishing walls with Acrylic Smooth exterior emulsion paint of required shade ,new surface (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) on walls over 2mm thick plaster of paris putty as specified and directed.

M&L for three coat of white wash on old surface on ceiling including preparation of surface complete all as specified and directed.

M&L for complete removal of existing treatment (any number of layers) on walls scrapping with steel scrapper or any other means,including filling depression of scrapped surface ,priming plaster and other old surface with alkali resistant priming paint and applying two coat of cement base paint all as specified and directed.

Complete removal of existing treatment and applying two coat of synthetic enamel paint on wooden surfaces of any description over 10 cm width or girth complete all as specified and as directed.

Complete removal of existing treatment and applying two coats of synthetic enamel paint on steel surfaces of any description over 10 cm width or girth complete all as specified and as directed.

S& F in repair Rotational moulded Polyethylene water storage tank 500 liters capacity (cylidrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I incl brass float valve 20mm dia and dismantling water tank.

S&F in repairs rotational moulded plythene water storage tank multilayer of capacity 1000 ltr hoisted and fixed position all as specified in SSR Part I.

Cleaning and removing all dirts and scales from service water tanks and from mouth of circulating pipes etc capacity of tank exceeding 250 ltr but not exceeding 500 ltr complete all as specified and directed.

All as per the description of srl item No 78 above but exceeding 500 ltr but not exceeding 1000 ltr capacity complete all as specified and directed.

Taking up or down 15mm dia old serviceable / unserviceable steel tubing any grade and connections cleaning for re-fixing or removal to store complete all as specified and directed .

All as per the description of srl item No 80 above but 20mm bore complete all as specified and as directed.

S&F steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc ,for 15mm bore pipes complete all as specified and as directed.

All as per the description of srl item no 82 above but 20mm bore complete all as specified and as directed.

Supply, laying and fixing of 20mm outer dia of CPVC pipe SDR 11 and plain CPVC SDR 11 fittings on wall/ceiling or laying in floors complete including brass CPVC fittings (i.e elbow, Tee, MTA/MBTA,FTA/FBTA, Tank adaptor, Union, etc suitable for 15mm bore bath fittings). Note:- length of pipe with fittings to be measured for payment, no extra payment should be made for fittings.

S&L of 25mm outer dia of CPVC pipe SDR 11 and plain CPVC SDR 11 fittings on wall/ceiling or laying in floors complete including brass CPVC fittings (i.e elbow, Tee, MTA/MBTA,FTA/FBTA, Tank adaptor, Union, etc). Note:- length of pipe with fittings to be measured for payment, no extra payment should be made for fittings.

M&L 20 to 25mm thick pre-polished machine cut Kota stone slab as in flooring over and including 15mm thick screed bed in cement mortar 1:6, laid over cement slurry @ 3 Kg/Sqm and jointed with grey cement slurry mixed with pigment to match with shade of slab including molding the edge of slab complete all as specified and as directed.

M&L 20 to 25mm thick pre-polished machine cut Kota stone slab as in riser or vertical surface over and including 10mm thick rendering in cement mortar 1:4, and jointed with grey cement slurry mixed with pigment to match with shade of slab including molding the edge where as specified and as directed.

Demolition of reinforced cement concrete (Reinforcement cut as required to facilatate demolition) of any description and in any position not otherwise specially provided complete all as specified and directed.

M&L reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete (reinforcement to be measured separately).

Mild steel TMT bars 10mm dia and above as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete.

Formwork to sides and soffits of slabs n. exc. 200mm thick and similar works rough finished surfaces of concrete complete all as specified and directed.

Cutting chases in brick walls, pinning in, making good any thickness up to wall tile to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubings or conduit wiring, etc and making good, cutting exceeding 20cm girth complete all as specified and directed.

S&F in repair brass CP wall mixer for mixing hot & cold water screwed down high pressure, with all necessary fittings, screwed for pipe 15mm bore with all fittings complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or in floor 75mm bore including demolition/taking down PVC/ drain/Rain water pipe complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110mm bore including demolition/taking down PVC/ drain/Rain water pipe complete all as specified and directed.

S&F PVC (SWR) bends with access door any radius, 75mm bore, complete all as specified and directed.

S&F PVC (SWR) bends with access door any radius, 110mm bore, complete all as specified and directed.

S&F PVC (SWR) branch piece equal or unequal of 110mm bore complete all as specified and directed.

S&F PVC (SWR) branch piece equal or unequal of 75mm bore complete all as specified and directed.

S & F in repair Bib taps cast copper alloy chromium plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed.

S&F in repair 10 litre capacity PVC low level flushing cistern ‘ white’ with inlet, float valve including bracket with 32mm dia PVC waste/flush bend pipe appx 600mm long complete all as specified and directed.

S&F in repair Vitreous china wash down water closet pan (pedestal pattern) including trap, white including fixing bolts, flushing cistern and flush pipe connection to trap and to flushing pipe in bend cluding provn of cement concrete beading complete all as specified and directed.

S&F vitreous china wash hand basin white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32mm dia PVC waste pipe including fixing of tap, waste fitting etc complete all as specified and directed.

Supply only EWC Seat cover white colour as approved of PVC closed pattern with flat bottom and mild steel lchromium plated or aluminised hinging device complete all as specified and directed. Make - Cera/Jaquar/Parryware

S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified

M/S AADI ENTERPRISES (BID ID -3500975)

VEDIT ENTERPRISES (BID ID -3500178)

Rohan Construction Company (BID ID -3498069)

M/S SURINDERAS CONSTRUCTION CO. (BID ID -3504150)

Keshav Brothers (BID ID -3497770)

SHAKYA ENTERPRISES (BID ID -3499388)