RENOVATION OF TIRC AT INMAS UNDER GE I RND DELHI

Amount

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as spicified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Taking down Chowkhats or frames of door/windows exc 1.5 Sqm but n exc 4 Sqm each (without taking off shutters from the frame) complete all as specified and directed.

Taking down Chowkhats or frames of door/windows n.exc 1.5 Sqm each (without taking off shutters from the frame) complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified and directed.

Taking down cement plaster on brick or stone walls/ceiling etc. including raking out joints, hacking for key, scrubbing down with water, etc and removal of rubbish out side the MoD land complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar etc complete all as specified and directed.

M&L for Granite (of any type) tiless 18mm to 20mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding polishing complete over and including 20 mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete over and including 15 mm thick screed bed in CM 1:6 complete all as specified & directed.

M&L Machine cut kota stone slab flooring 18-20 mm thick as in riser of steps, skirting, dado etc and pillar laid over 10mm thick rendering in CM 1:4 complete all as specified and directed.

S&F manually opening & closing roller type polyester (translucent) blinds, of approved make characteristic all as per manufacturer instruction complete all as specified and directed.

M&L for brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L for brickwork with sub class old size ‘B’ bricks, straight or curved on plan to any radius or plan in half brick thick walls built in CM 1:4 complete all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry over and including 10 mm thick rendering in CM 1:4 and pointed in white or colour cement to match the shade of tiles complete all as specified and directed.

M&L for Non-skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm, in floors etc. set and jointed in neat cement slurry, over and including 15 mm thick screed bed in CM 1:6 and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

M&L for fully Virified (light shade) tiles 9 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry, over and including 15 mm thick screedbed in CM 1:6 and pointed in white or coloured cement to match screedbed the shade of tiles the shade of tiles complete all as specified and directed.

M&L for fully Virified (light shade) tiles 9 to 10 mm thick (square/ rectangular) polished in skirting/vertical surfaces set and jointed in neat cement slurry over and including 10 mm rendering in CM 1:4 pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

Dismantling wall panelling and ceiling boards (fibre pulp, insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified and directed.

S&F Anodised aluminium snap grid frame work for false ceiling and Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified and directed.

S&F 8mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid complete all as specified and directed. Note:-Frame work for ceiling shall be measured and paid separately.

M&L 15mm thick rendering in cement mortar 1:6 on fair faces of new or old brick works or concrete work finished even & smooth without using extra cement complete all as specified and as directed.

M&L 10mm thick rendering in cement mortar 1:3 on ceiling new or old brick works or concrete work finished even & smooth without using extra cement complete all as specified and as directed.

M&L preparation of newly/Old plastered surface of ceiling applying 2 coat of white wash complete all as specified and directed.

M&L applying two coats of oil bound distemper over and including applying 3 mm thick (average thickness) wall care putty on newly plastered surface of wall complete all as specified and as directed.

M&L for complete removal of existing treatment and applying two coat of oil bound distemper over of 3mm thick (average thickness) wall care putty complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coat of oil bound distemper over of 3mm thick average thickness wall care putty complete all as specified and directed.

M&L RCC 1:2:4 Type B1 (using 20 mm graded stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs landing, balconies, deck slabs and in shelves and like etc complete all as specified and as directed. Note: (Re-inforcement shall be measured and paid separately).

S&F mild steel TMT reinforcement bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressumers, lintels, cantilevers, shelves including supports, overhangs etc also splays between floors and beams complete all as specified and as directed.

S&F in repair vitreous china oval type wash hand basin (under/over counter) white size 550x460mm incl CP waste fitting 32mm dia and PVC bottle trap etc complete all as specified and as directed.

S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 485mm x 420mm bowl size 410mm x 3330mm x 160mm complete all as specified and directed.

S&F in repair brass CP Pillar taps, cast copper alloy, fancy type with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repair fancy type chromium plated bib taps cast copper alloy with capstan head, screwed down for iron pipe and fixed 15mm bore of pipe complete all as specified & directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm fixed in position complete all as specified and as directed.

S&F in repair fancy type, chromium plated angle valves cast copper alloy, screwed for 15 mm bore iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repair 10 litr capacity, PVC, valveless, syphonic action type, flushing cistern, low level, white with inlet ball valve, float and handle including fittings & flush pipe complete all as specified and as directed.

S&F in repair white Vitreous China wash down water closet (pedestal pattern), including fixing bolts complete all as specified and as directed.

S&F Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repairs vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor and fixed complete all as specified & directed.

S&F in repair white Vitreous China Urinal, Half stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; including CP urinal Spreader with brackets, and , Waste coupler complete all as specified and as directed.

M&L cutting chases, pinning in brick walls and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps cills etc or for concealed water tubing or concealed conduit wiring etc cutting not exc 10 cm width or girth complete all as specified and as directed.

S&F in repairs bib taps cast copper alloy, CP, fancy type, with crutch or butterfly handle, screwed down for 15 mm bore iron pipe or brass ferrule complete all as specified and as directed.

S&F 20mm bore PTMT tank connection Nipple suitable for HDPE water tank (Minimum weight 20mm-45gms) complete all as specified and as directed.

S&F in repair 20 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete all as specified and as directed.

Dismantling water tanks exc 500 litres but n. exc 1000 ltrs complete all as specified and directed.

Taking down 15mm dia steel water tubing and connections, complete all as specified and directed.

Taking down 20mm dia steel water tubing and connections, complete all as specified and directed.

Taking down steel water tubing of 25mm dia and connections complete all as specified and directed.

Cutting existing steel tubing of 20mm bore for alterations or additions (Each cut measured) screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector) all as specified and directed.

Cutting existing steel tubing of 25mm bore for alterations or additions (Each cut measured ) screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector) all as specified and directed.

M&L 20mm bore outer of 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and as directed.

All as per ser item No. 49.00 above but 32 mm bore.

All as per ser item No. 49.00 above but 40 mm bore.

S&F 30 mm thick flush shutter, solid core construction with block board core and ply wood face panels, commercial type on both side, complete all as specsified & directed.

Dismantling of cast iron pipes, jointed in cement mortar upto 100mm dia of pipe complete all as specified and as directed.

S&F 100mm bore cast iron spun pipes, soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors complete all as specified and directed.

All as per item No 54.00 above but 75 mm bore.

S&F CI 75 mm bore bends (any radius), diminishing pieces or tapers (layers bore measured) complete all as specified and directed.

S&F CI 100mm bore bends (any radius), diminishing pieces or tapers (layers bore measured)

S&F CI 75 mm bore traps 'P' or 'S' complete all as specified and directed.

S&F CI 100 mm bore traps 'P' or 'S' complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style), consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; panelling of prelam colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified, shown in drawing and as directed.

S&F Solid PVC door frame of size 50mmx 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube all as per specification and drawing complete all as specified and as directed.

S&F 150 mm size aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F 200 mm size aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F 200mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as directed.

S&F 100 mm long Butt hinges, extruded aluminium alloy, type B-21 with galvanised mild steel hinge pin, anodised and fixed complete all as specified and as directed.

S&F in repairs 140mm floor door stoppers of aluminium alloy body and tounge, anodised with hard drawn steel springs, fixed in floors complete all as specified and directed.

S&F aluminium powder coated (minimum thickness of powder coating 50 micron) section as in frame for aluminium doors fixed to walls etc with rawl plugs and steel screws incl all cuttings etc for fixing pivots complete all as specified and as directed.

S&F aluminium Powder coated section swing door shutters, partly panelled and partly glazed, comprising of top rail 86.17x44.45x1.60mm, bottom and lock rail 150x44.45x2.00 mm and styles 47.50x44.45x1.6mm and including jointing cleats, aluminium snap beading, rubber gasket, glazing clips and one disc type handle and one aluminium tower bolt 200mm long for each leaf on each side with one floor spring and dead lock of brass for each leaf, fixed in position complete all as specified and as directed. Note:-Particle board and glass with rubber beading shall be measured & paid separately.

S&F aluminium powder coated section for windows/ cupboard framed shutters (fixed/openable) frame made out of aluminium section 63.50mmx 38.10mm x1.60mm thick and shutter fixed or openable horizontal and vertical members of aluminium powder coated section 47.50x44.45x1.60mm thick of aluminium beading rubber gasket, aluminium fittings such as 2 Nos hinges 75mm long, 02 Nos tower bolts, 150mm stay rod and one handles 125mm etc complete for each leaf complete all as specified and as directed.

S&F aluminium, powder coated grill 6 x 4.5 mm thick section, 10cm centre to centre spacing complete with U-channel alround fixed in window with screws complete all as specified and as directed.

S&F 12 mm thick prelaminated particle board exterior grade with decorative prelaminated both sides of approved shades fixed to aluminium shutters/partitions etc complete all as specified and as directed.

S&F 4.8 mm thick sheet glass ordinary quality, area exc 0.50 Sqm each pane and fixing by means of glazing pins and rubber beading etc in aluminium partitions, windows, doors etc complete all as specified and as directed.

S&F 4.8 mm thick sheet glass ordinary quality, area n.exc 0.50 Sqm each pane and fixing by means of glazing pins and rubber beading etc in aluminium partitions, doors, windows complete all as specified and as directed.

S&F in repairs PVC waste pipe 32mm size for WHB, urinals etc complete all as specified and directed.

S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed.

S&F grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm of 26 gauge and fixed with stainless steel wire staples/ MS beading complete all as specified and directed.

S&F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 105gms) complete all as specified and directed.

S&F Towel rail 600mm long, brass chromium plated fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and directed.

S&F in repair fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc. complete all as specified and directed.

S&F in repair vertical variation blinds consisting of Aluminium head rail.vanes/louvers 100 mm wide of approved tint and travers coard complete fixed in position all as specefied and directed.

S&F rotational moulded polyethylene water storage tank of 1000Lts capacity (cylindrical) vertical with (closed top) hoisted and fixed in position all as specified and directed.

Removing excavated materials to a distance exc 1.50 KM and n.exc 5.0 KM depositing where directed at a level n.exc 1.50 m above the starting point complete all as specified and as directed.

M&L for preparation of newly steel surfaces of any description over 10 cm in width or girth and applying two coats of synthectic enamel paint over a coat of red oxide primer complete all as specified and directed

S&F coated aluminium section 50 micron thick powder partly glazed / partly panelled partitions and fixed glazing frame made out of aluminium frame of section 63.50mmX38.10mmX1.60mm thick incl necessary jointing cleats, glazing clips, rubber packing anodised aluminium snap beading screws etc frame work fixed to walls, floors and ceiling with rawl plug wherever required complete for each leaf complete all as specified and as directed. Note-Particle board and glass with rubber beading shall be measured & paid separately.

M&L 12 mm thick Prelaminated particle board, interior grade, prelaminated on both side with decorative choice laminations, fixed to aluminium frame work anodised aluminium beading complete all as specified and as directed.

Dismantling Mild Steel works of any description all as specified & directed.

S&F stairs (framed) including stringers, treades, landing, balusters, hand rails etc., including cleats, brackets, etc, completed Fe-290(Gde-E165) complete all as specified and as directed.

Taking down carefully point wiring copper/aluminium (light, fan, socket, and power) complete (including fittings such as switches ceiling roses, pendent regulators sockets except light fitting) etc complete all as specified and as directed.

M&L for point wring for one light/ceiling fan controlled by one switch with 1.5 sqmm (nominal area) PVC insulated and PVC unsheathed multi stranded copper conductor cable FRLSH in and including concealed PVC conduit 20 mm dia medium duty ISI marked, including suitable new steel sunken boxes, modular frame and cover plate for fixing of modular switches as per required point in that board, flush to surface for one light point, fan point, controlled by one switch on the same board with other switch or independent including PVC insulated unsheathed 1.5 sqmm copper conductor cable FRLSH connected to common earth duly complete including cutting, chasing the surface and then making good the same in CM 1:6 complete all as specified and directed.

All as per item No 93.00 above but socket 3 pin 5 Amp 230 volt flush type on same board.

All as per item No 93.00 above but for one socket point out let 3 pin 5 Amp in independent board.

All as per item No 93.00 above but for one socket point out let 3 pin 15 Amp with 2.5 sqmm PVC copper conductor FRLSH and 2.5 sqmm PVC insulated copper conductor as earth continuity conductor.

S&F modular switch one way 6 Amps single pole 240 V complete all as specified and directed.

S&F socket modular type 2 in 1, 2/3 pin combined 6 Amps flush type 240 V complete all as specified and directed.

S&F modular switch one way 16 Amps single pole 240 V complete all as specified and directed.

S&F socket modular type 2 in 1,6/16 Amps flush type 240 V complete all as specified and directed.

S&F regulator for ceiling fan modular electronic step type 120watt- 2module suitable for 1200/1400mm ceiling fan complete all as specified and directed.

S&F ceiling rose surface type bakelite 65x50mm two to three terminal 230V complete all as specified and directed.

S&F in repair fluroscent light to LED light fitting recessed mounted 2'x2 ' of capacity 36 Watt 6500K of 240V Environment friendly High quality polycarbonate opal diffuser for glare free uniform light distribution existing tube light taking out complete with all connected accessories complete all as specified and directed.

S&F in repair fluroscent tube light with LED Tube light of 20 Watt surface/wall mounted LED batten with polycarbonate housing & integrated electronic driver with aluminium heat sink & Made of ultra slim co-extruded polycarbonate channel with housing part in white finish & diffuser part in reeded opal finish,High efficiency long life LED with lumen efficacy of 130 lm/W and colour temperature 6500K including all necessary fittings in existing T5/T8 tubelight taking out including necessary electric connection complete all as specified and directed.

S&F in repair fluroscent tube light with LED Tube light of 09 Watt Aluminium extructed LED integrated Batten with aluminium heat sink & Made of ultra slim co-extruded polycarbonate channel with housing part in white finish & diffuser part in reeded opal finish,High efficiency long life LED with lumen efficacy of 130 lm/W and colour temperature 6500K suitable for installation in existing T5/T8 tubelight taking out including necessary electric connection complete all as specified and directed.

S&F in repair telephone socket jack RJ 11 With shutter.

M&L for Taking down exhaust fan of any type/ size, single phase, 240 volts AC, greasing/oiling, including cleaning, painting with using spray machine with synthetic enamel paint, marking MES No. etc and hanging the same in position including making all electric connections complete all as specified and directed.

M&L for taking down of ceiling fan 1200/1400mm sweep, metal body type single phase 240 volts AC, keeping aside for general servicing i.e greasing/oiling including cleaning, painting with using spray machine with synthetic enamel paint & including marking of MES No. etc and hanging the same in position including making all electric connections complete all as specified and directed.

S&F in repair sub main wiring with four run of single core PVC insulated FRLSH multistranded copper conductor cable of size 10 Sqmm and two run of 10 Sqmm PVC insulated FRLSH copper conductor cable as earth continuity conductor multistranded cable in and including concealed PVC conduit pipe 25 mm external dia medium grade including all accessories complete all as specified and directed. Note: Any number of sum of cable and conduit shall be measured as one unit.

S&F in repair wiring for circuit/submain wiring along with earth wire with the 2x4 Sqmm + 1x4 Sqmm earth wire of FRLSH PVC insulated multistranded copper conductor multistranded cable in and including concealed conduit pipe 25 mm external dia medium grade including accessories complete all as specified and as directed. Note: Any number of sum of cable and conduit shall be measured as one unit.

S&F in repair MCCBs TP&N distribution board with double door vertical type TPN DB made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating, CRCA sheet, suitable for MCCB for capacity 125Amp, 16 KA, Incomer 4 ways 415 Volts with busbar rating 200 Amps including grouting in the wall, cutting & chasing etc complete all as specified and directed.

S&F in repair of MCB distribution board double door SPN DB made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating, SPN 12 way. 230 volts with bus bar rating 100 Amps, dust and vermin proof and IP 43 - IK 09 protection suitable for incorporation of MCB, including grouting in the wall, cutting & chasing etc complete all as specified and directed.

S&F in repair MCB 6 Amp to 32 Amp SP 10 KA C' series complete all as specified.

S&F in repair MCCB four pole 415 volts 50 Hz , 125 Amps, with rupturing capacity 35 KA including taking down old unserviceable MCCB complete all as specified and as directed.

S&F in repair MCB SPN 230 volts 50 Hz , 63 Amps, with rupturing capacity 10 KA including taking down old unserviceable MCB complete all as specified and as directed.

S&F in repair of single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and as directed.

Material and Labour for earthing complete with GI earth plate electrode 600mmx600mmx6mm thick buried in ground vertically to a depth not less than 2.25meters below ground level with top edge of the earth plate at a depth not less than 1.5 meter below the ground level, earth plate surrounded 15cm thick layers of common salt and charcoal dust starting from ground below 15 cm of earth plate and up to 15 cm above the same. GI plate connected with GI wire 4.00mm by means of nuts, bolts and washers. GI Wire laid in 15mm dia light grade GI pipe as protection from top of the plate up to test point (cost of protection pipe up to 7.5 meters from earth electrode will be included in the rates quoted by the contractor) as shown in electrical plat No. 03 of SSR Part-I with following:- (a) GI wire 4.00mm dia. (b) Watering pipe GI light grade 20mm dia from top of the earth electrode up to MS funnel with wire mesh embeded in floor of PCC earth pit. (GI Funnel should properly tightned on GI watering pipe and embeded in PCC floor of earth pit with open top suitable for watering of earth pits) (c) PCC earth pit 30x30x30cm constructed in PCC 1:2:4 type B1 exposed surfaces smoothly finished with 15mm thick cement mortar in 1:6 plaster including RCC pit cover 25mm thick re-inforced with 8mm dia bars 75mm centre to centre both ways with 2 Nos MS handles of 12mm dia suitable for carrying of pit cover.

M&L for earth continuity conductor or main earthing lead of size 4.00mm GI wire fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4 mm galvanised iron wire complete all as specified and as directed.

S&F in repair passing through ducting/trenches as site requirement in replacement (and connected to existing main MCCB) XLPE insulated screened pvc bedded, galvanised steel strip or wire armoured underground cable heavy duty 1100 volts grade with stranded aluminium conductor, cross sectional area 35 Sqmm 3.5 core complete all as specified and as directed.

Excavation in trenches in soft/loose soil not exceeding 1.5M depth & not exceeding 1.5M in width over energised LT cables for carrying out brick work for preparation of cable duct including for taking out and relaying of LT Cables complete all as specified and directed.

Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25cm thick as in soft/loose soil complete all as specified and as directed.

Removing excavated surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level and not exceeding 1.5 mtr above the starting point complete all as specified and as directed.

Supply & laying dry fine sand for cushioning of underground cable laid in trenches/duct complete all as specified and as directed

M&L for sub class 'B' burnt brick flat across the cable, for protection of cable laid in trenches complete all as specified and directed

Supply and laying GI pipe light grade in replecement of 80mm dia laid in trenches for protection of UG cable complete all as specified and directed.

Taking down the exisiting split AC from its position and refixing the same at new position after minor repair works servicing and gas charging in all repect complete all as specified and directed.

Supply, Installation, Testing and Commissioning in repair of 2 loop Addressable fire alarm panel Epoxy powder coated, with IP30 protection, 16 zonal LED indicators, 2 programmable sounder circuit, large graphic display, sensitive adjustment and drift compensation, variable language and character settings complete all as specified and directed.

Supply, Installation, Testing and Commissioning of Addressable Photoelectrical/Heat Multi Sensor detector contains with Photoelectric smoke sensor and a thermistor temperature sensor with operating voltage 17-28V DC and operating temperature 32 to 100 degree, complete all as specified and directed.

Supply, Installation, Testing and Commissioning in repair of of Addressible Heat Detector with a thermistor temperature sensor, with operating voltage 17-28V DC and operating temperature 32 to 100 degree, complete all as specified and directed.

Supply, Installation, Testing and Commissioning in replacement of Addressable Manual Call point complete all as specified and directed.

Supply, Installation, testing and Commissioning in replacement of Loop sounder complete all as specified and directed.

Supply, Installation, Testing and Commissioning in replacement of Addressable Control Module complete all as specified and directed.

Supply, Installation, Testing and Commissioning of Mini Switch Monitor module complete all as specified.

Supply, laying multi stranded copper conductor PVC insulated and unsheathed FRLSH cable 2 core 1.5 sqmm, ISI marked complete all as specified.

M&L for fixing of MS conduit ISI marked of size 20mm on wall/ ceiling with clamps, screw and all connected items complete all as directed.

M/s Himgiri construction

LR Mendiratta and Sons

SRK CONSTRUCTION

Sree Ram Enterprises