REPAIRS TO JOINERY GATE COURTYARDS FLOORING WALL TILING PLASTERING SANITARY FITTINGS DRAINS WALL PATH PAINTINGS AND OTHER CONNECTED WORK IN CERTAIN MD AND OTM ACCN AND MH 45 MVH AREA IN ZONE C AREA AT NDA KHADAKWASLA

Amount

Dismantling floor or wall tiling of any description and size including cement mortar bedding (but not backing), removing rubbish off the premises complete all as directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc including cleaning off premises as directed

Taking down cement plaster on brick or stone walls etc including raking out joints,hacking for key ,scrubbing down with water etc complete

Demolition of unreinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) including cleaning off premises as directed

M&L for 75 mm thick PCC (1:4:8) type D2 (Using 40 mm graded stone aggregates) as in sub base all as specified and directed

M&L for light colour non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) in floors etc, area of each tile exc 0.11 sqm and n. exc .18 sqm, set and jointed in neat cement slurry and pointed in coloured cement to match over and incl 20 mm thick screed bed or bedding layer in cement morter(1:6) complete all as directed.

M&L for colored ,Glazed ceramic tiles in vertical wall surfaces 350x250mmx7mm / 450X350X7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, laid over and including provn of 10 mm thick plaster in cement mortar (1:4), including taking down plaster complete all as specified.

M&L for joint free ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:6)

M&L for machine cut cuddapa stone slab 20 to 25mm thick over cement screed base ,laid and pointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing complete

M&L for machine cut superior quality Kota stone slab flooring 20-25 mm thick over cement screed , laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete match including bulnosed to edges complete and including 20 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed

M&L for rough dressed sahabad stone slab flooring (30 mm thick) incl bedded and jointed in cement mortar (1:6) and pointed in cement mortar (1:3) complete all as specified and directed

Ditto all as per Item No. 11 above but except sahabad stone

M&L for glossy finish machine pressed precast conctete interlocking paver block with grey cement and pigments any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade including 30mm thick sand chusioning

M&L for 100 mm thick PCC (1:2:4) type B2 Using 40 mm graded stone aggregates & Finishing cement concrete surface even and smooth Without using extra cement all as specified and directed

S&F in repair water closet vitreous China squatting pan, ‘Orissa’ pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) connection to trap and squatting pan including P' trap set in and including concrete etc. complete all as specified and direted including making good to floor

S&F in repair wash down water closet (Pedestal pattern), white incl traps and all fittings complete

Dismantling of cast iron 100 mm bore pipes jointed in cement motar

Dismantling of cast iron 75 mm bore pipes jointed in cement motar

S&F in repair 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or floor

S&F in repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or floor

S&F in repair for 75mm bore dia PVC (SWR) bends with access door complete all as directed.

S&F in repair for 75mm dia PVC (SWR) branch piece single(single Y) equal or unequal with access door complete all as specified and directed

S&F in repair for 75mm dia PVC (SWR) vent cowl complete all as specified and directed

S&F in repair for 100mm bore dia PVC (SWR) bends with access door complete all as directed.

S&F in repair for 100mm dia PVC (SWR) branch piece single(single Y) equal or unequal with access door complete all as specified and directed

S&F in repair for 110mm dia PVC (SWR) vent cowl complete all as specified and directed

M&L for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed

Excavation in trenches in Soft/Loose soil n. exe 1.5m wide & n. exe 1.5m depth for foundation etc n.exe 10sqm on plan and getting out.

Demolition and breaking up drain pipes ( SWG,AC or RCC pipes ) set in CM 150mm dia.

M & L for providing bed to drain pipes 150mm dia in cement concrete (1:3:6) type C2 using 40mm graded stone aggregate including packing under & haunching against the sides of pipes after they are laid & tested.

M & L for providing reinforced cement concrete pipes 150mm dia class NP 2 with collars laid and jointed with cement jointed complete all as directed

Cutting into existing manholes for connecting new drains internal dia of pipe 150mm dia making good to pipe & rendering cutting out existing benching for forming branch channel (1/2 round or 3/4 section in cement concrete (1:2:4) type B-1, smooth finished .

Returning filling in including spreading levelling, watering & well ramming in layers n. exe 25cm

Removing excavated material any type of Soil n. exe 50m and depositing where directed by Engg-in- charge at a level n. exe 1.50m above the starting point in

M&L for providing plain cement concrete (1:2:4) type B1 using 20mm grade stone agg. as in surfaces channels & drains

M & L for providing plain cement concrete (1:2:4) type B1 using 20mm grade agg. as in coping including weathering slightly, rounded or chamfered angles and throating and necessary use and waste of form work all as directed

M&L for providing precast RCC 1:2:4 type B1 (using 20mm grade stone aggregate as in cover slabs for manholes set in CM (1:6) complete all as Note : Reinforcement shall be measured & paid separately

S&F for providing mild steel TMT bars 6 to 8 mm dia cut to length bent to shape required includig cranking, bending etc & binding with ms wires (annealed) n. exe 0.9mm dia complete all as directed.

S&F for providing MS bands, straps and handles for MH covers and rungs in manholes and similar small articles, complete all as directed conforming to Fe 290 Gde -E- 165

Demolition of brick / block masonry / Stone masonry built in Cement mortar

M&L for precast cement concrete (1:3:6) type C-1 (Using 20mm graded aggregate ) block masonry with solid blocks exc10 cm thick in width and setting in cement mortar (1:6) complete in wall complete all as specified.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:6) finished even and smooth without using extra cement

M&L for rendering 10mm thick in CM (1:3) on fair faces of brick work or concrete surfaces as in ceiling finished even and smooth without using extra cement

Extra for forming fair finished drain or channel girth not exc 30cm in cement concrete using extra cement including form mounds etcall as specified and directed

M&L for preparing new plastered surfaces of walls applying two coats of distemper oil bound all as specified and directed

M&L for preparing new plastered surfaces of ceilling applying two coats of distemper oil bound as specified and directed

M&L for preparing old/existing plastered surfaces of walls applying one coat of distemper oil bound as specified and directed Note :- (i) The coulour scheme of the painting will be as decided by the accepting officer (ii) work tobe execute under occupation conditions.

M&L for preparing old/existing plastered surfaces of ceiling applying one coat of distemper oil bound as specified and directed Note :- (i) work tobe execute under occupation conditions.

M&L for preparation of old painted surfaces of wall by completely removing existing treatment by scrapping , cleaning , washing with water etc , and applying Two coats of oil bond distember including filing the surface with crack filler wherever required all as specified and directed . Note :- (i) The coulour scheme of the painting will be as decided by the accepting officer (ii) work tobe execute under occupation conditions.

M&L for preparation of old painted surfaces of ceiling by completely removing existing treatment by scrapping , cleaning , washing with water etc , and applying Two coats of oil bond distember including filing the surface with crack filler wherever required all as specified and directed . Note :- (i) work tobe execute under occupation conditions.

M&L for 3mm thick wall care putty on wall complete all as specified and directed

M&L for 3mm thick wall care putty on ceiling complete all as specified and directed

Preparing old painted wooden surfaces exc. 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

Preparing old painted steel surfaces exc.10cm width or girth and applying one coat of synthetic enamel paint , including grills, gate complete all as specified and directed .

Preparing old painted steel surfaces exc.10cm width or girth and applying one coat of Aluminium paint as directed

M&L for preparation of old painted surfaces of wall , cleaning , washing with water etc , and applying one coat of exterior emulsion paint (Appex paint) , including filing the surface with crack filler wherever required complete all as specified and directed . Note . (i) The coulour scheme of the painting will be as decided by the accepting officer (ii) work tobe execute under occupation conditions. (iii) Work to be execute in any respective ht of building

Taking down up or down steel tubing and connections incl cleaning for re-fixing or removal to stores ,15mm dia pipes complete all as specified and directed.

Ditto all as per item No. 57 above but 20 mm dia pipes.

Refixing of old serviceable 15 mm bore of steel tubing pipe and conection in new or old position on wall, cieling, floor etc complete all as specified and directed.

Ditto all as per item No. 59 above but 20mm dia pipes

S&F galvanised mild steel medium grade tubes 15mm dia bore with all fittings and fixed to wall , floor etc. complete all as specified and directed.

Ditto all as per item No. 61 above but 20mm dia pipes.

S&F in repairs Rotational moulded polye- thylene water storage tanks 500 Ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling existing water tanks.

S&F in repairs Rotational moulded polye- thylene water storage tanks 1000 Ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling existing water tanks.

S&F in repair 15mm dia tank Nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm-45gms /25mm- 65gms) including taking down old one as specified & directed.

S&F in repair 20mm dia tank Nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm-45gms /25mm- 65gms) including taking down old one as specified & directed.

S&F in repairs Ball valves 15mm dia high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm - 690 gms) including taking down old one complete all as specified and directed.

Ditto all as per Item No. 67 above but 20mm dia

S&F in repairs Bib taps 15mm dia, chromium plated ,fancy type ,cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed including taking down old one complete all as specified and directed.

S&F in repairs Stop valves 15mm dia, chromium plated ,fancy type, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed including dismantling of old one complete all as specified and directed by Engr-in-charge.

S&F for Brass chromium plated shower rose 125mm size complete as directed and sample to be approved

S&F in repairs for PVC flushing cistern valve less, syphonic action type low level, ball valve, float and handle with bracket fixed in repair of 10 ltrs capacity all as specified and directed including taking down old one.

S&F for Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern including necessary cutting to floor tiles and connection to WC complete all as specified and directed

S&F PVC connection 15mm size with PTMT nuts of length 600mm.

S&F Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever castiron brackets, connecting union etc. overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm

S & F in repair Vitreous China wash basin, white, flat back, size 550x450mm excluding taps, waste, chain and plug and porcelain stopper but including brackets ,fixed in repairs

S&F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed , screwed for iron pipe of bore 15 mm fixed in repairs.

S & F PVC connections 15mm size with PTMT nuts of length 450mm

S&F in repair Waste coupling of PTMT (half or full threaded) (Minimum weight 40 mm-45gms/40mm-60 gms) for 32mm bore dia pipe

S&F in repair Waste coupling of PTMT (half or full threaded) (Minimum weight 40 mm-45gms/40mm-60 gms) for 40mm bore dia pipe

S&F towel rail 600 mm long of CP brass, fixed with chromium plated brass screws and wooden/plastic cleats all as specified.

S&F Low density polyethylene (LDPE) pipes 40mm dia of pressure rating 6kgf/sq. cm

S&F doom grating 100mm dia of PTMT (Minimum weight 25gms)

Grating doom 125/100 mm dia with waste hole of PTMT. (Minimum weight 40 gms)

S&F Soap dish any type fixed to plugs with chromium plated brass screws minimum size 160x160x90mm

M&L for unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe 50mm bore of pipes

S&F in repairs Gun-metal, globe or gate valves 15mm dia, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and direceted by Engr-in-charge.

S&F in repairs Gun-metal, globe or gate valves 20mm dia, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and direceted by Engr-in-charge.

Taking down chowkhats or frame not exc 1.5 sqm each with shutters (without taking off shutters from the frames)

Taking down chowkhats or frame not exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames)

Taking down shutters exe 1 sqm and n.exc 2 sqm each and removing

Hacking out old broken glass(any thickness, size, quality or discription) from wooden frames or stone, concrete or brick surrounds , glazed with putty or fixed with beads

M&L Solid PVC door frame of size 50x47mm ,made out of 5mm plain colour PVC sheet re inforced with MS square tube ,supplying and fixing in opening

S&F Factory Made Solid PVC Moulded Door Shutters With Particle Board Core 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed by Engineer-in-charge

S&F 2nd class hard wood Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed incl cutting holes and hold fasts fixing (split at one end)

S&F 35mm thick Factory made 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats

M & L 35 mm thick Factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated

S&F 30mm thick 2nd class hardwood skelten shutter glazed and skelton open rebated and prepared to receive glass with divided into squares with plain chamfered or rounded mitered and rebated sash bars any nubmers fitted with cut and mitered beads for securing glass size of members of windows, ventilators, etc. are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24(b)

S&F Anodised aluminium frame powder coated for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall complete all as specified.

S&F Powder coated anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified

S&F Powder coated anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F Powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

S&F 100mm butt hinges cold rolled mild steel medium weight and fixed

S&F 100mm Aluminium handles, cast type, anodised

S&F 150mm Aluminium handles, cast type, anodised

S&F 75mm butt hinges cold rolled mild steel medium weight and fixed

S&F Aluminium anodised barrel tower bolts of extruded section 100mm long

S&F Aluminium anodised barrel tower bolts of extruded section 75mm long

S&F for Aluminium anodised, barrel tower bolts 150mm long of ex- truded section and fixed

S&F 200 mm long aluminium alloy, anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections all as specified and directed

S&F for 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed.

S&F in repairs 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed also including taking down old one.

M&L for preparation of new wooden surfaces and painting two coats of Synthetic Enamel paint over a coat of pink primer.

S&F Sheet glass 3 mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane

S&F 4mm thick Figured glass, pin head type and glazing with oil putty in squares in exc 0.5 sq.m in each pane

S&F in repairs for Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples to shutters including taking out wooden beads and re-fixed in the same position complete all as specified and directed (Note : The item considered in the scheduled to be executed in repair in patches only in repairs at various locationes as directed)

S&F Aluminium (extruded section body) Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F for framed work as in doors or gates of angles or other section with gussest plate, rails, braces,etc complete drilled for fixing of steel sheeting or other covering door etc, to be prepared for hanging or sliding with and encluding either hooks and hinges or steel hanging door fitting including of steel sheeting or other covering , running railand guides and hanging, also fastening and fixing complete all as specified and as directed

M&L for two coats of synthetic enamel paint over a coat of Red oxide primer including preparation of new steel/iron surface of any description over 10 cm in width or girth

Walling of squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6)

M&L for raised pointing to random or polygonal rubble, uncoursed on brought upto courses in cement mortar (1:4).

Raking out joints/pointing to squared rubble masonry, coursed or uncoursed built in cement mortar

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings

S&F pre painted galvalume aluminium zinc coating GI based corrugatedsteel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering /cladding to wall fixed with L hooks or J types or cranked bolts complete all as specified and as directed at site (i) Work to be execute in any respective ht of building

M&L for pre painted galvalume aluminium zinc coating GI based Plain steel sheet 0.5mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified (i) Work to be execute in any respective ht of building [ Note : The all items considered in the schedule to be executed in repair in patches & in occupied condition only in repairs at various locations as directed ]

Sarkar Enterprises

M/S SHREE CONSTRUCTIONS

AVS CONSTRUCTION

Sunil Constructions

G V HAGAWANE

SUN Enterprises

Mourya Enterprises