SPECIAL REPAIR/REPLACEMENT OF 11 KV HT OH CONDUCTOR WITH ABC CABLE AT FEEDER NO 2 AND 12 AT BABINA CANTT UNDER GE BABINA

Amount

S&F Aerial bunched conductor having phase conductor of stranded compacted circular aluminium conductor screen of extruded semi conducting compound extruded XLPE insulated 11000 volts grade , insulation screen of extruded semi conducting compound over all metellic screen of copper tape extruded PVC type ST-2 sheathed twisted around bare aluminium alloy messenger generally as per IS 7098 Part-II of size 3 x 95 SQMM + 1x 95 SQMM on existing HT poles including neesary fixing MS clamps, brackets, nut bolts etc suitable for fix/hang the AB cable on the steel/PCC pole complete all as specified and directed. Make :- Havells/KEI/Finolex/Universal Cables

Supply, erecting and fixing in replacement of true vertical position, steel tubular swaged pole (410 SP-31) 9.0 mtr long, complete with cast iron base plate, pole cap / finial taper plug, bolts, nuts and washers, welded reduced section and longitudinal weld throughout entire length of pole including 2 coats of black bituminous paint externally upto planting depth and remaining exterior portion of pole shall be provided with one coat of red oxide primer and two coats of aluminium paint paint including making alternate white and black strips of 30 cms height (05 Nos strips) complete all as specified and directed. (Numbering of the poles shall be done with synthetic enamelled paint, shape & size of letters as directed). The quoted rate includes cost for shifting of existing Cross arms, bracing, ACSR conductors insulators, GI wire from eisting pole to new poles. Note :- Excavation incl earth work and PCC foundation will be measured and paid separately. Make :- National tubing company ltd Kanpur/Quality steel products Ltd/India electric Poles/P.S. Steel tube Pvt Ltd

Supply, erection and connection in replacement new Pre- streessed concrete poles 152 mm x 152 mm at top and 152 mm x 260 mm at bottom, class 9, 11.0 mtrs long including making alternate white and red strips 30 cms height (05 Nos strips) numbering the poles by 2" height letters complete all as specified and directed.. Make :- M/s Concrete Udyog/ M/S Sankls Udyog/M/s Hindustan Pressed Concrete.

Supply, erection and connection new Pre- streessed concrete poles 102 mm x 172 mm at top and 102 mm x 279 mm at bottom class 10, 9.0 mtrs long including making alternate white and black strips 30 cms height (05 Nos strips) numbering the poles by 2" height letters complete all as specified and directed.. Make :- M/s Concrete Udyog M/S Sankls Udyog/M/s Hindustan Pressed Concrete.

M&L for switch air break gang operated triple pole mechanically operated mounted on HT insulators (12 insulator type) and MS galvanised steel frame with operating mechanism worked from ground level incl GI medium grade 32 mm dia pipe for operating rod and operating handle with 11 KV insulation for current rating up to 200 Amp 11000 volts with locking arrangement incl MS clamps, nuts, bolts and washers etc with drop out expulsion type fuse, single pole up to 25 Amp 11000 volts with fuse barrels incl two coats of aluminium paint over a coat of red oxide primer on MS work complete all as specified and as directed.

M&L in replacement non -linear resistor type surge arrester (lightning arrestors) confirming to IS-3070 (Part-1) having voltage rating 12 KV, rated frequency 50 Hz, nominal discharge current 65 KA (heavy duty) expulsion type transmission class complete with all fittings suitable for 11 KV, 3 phase earthed distribution system complete all as specified and directed.

M & L for Stay assembly complete with accessories as shown in electrical plate No. 1, 20 mm dia of stay rod, 180 cm long etc complete all as specified and directed.

Supply and fix loop type insulator vitreous procelain, white , brown or green, large size with overall dimensions 140mm, clearence of hole 25.5mm dia ball and socket type brown, white or green single disc assembly for tension with tension clamps for conductors, working pressure 11000 volts grade etc complete all as specified and directed.

Supply and fix galvanised stay strand, 7/4 mm complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregates) as in foundation filling for erection of pole and mass concrete for poles all as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregates) as in foundation filling for erection of pole and mass concrete including form work for poles all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in coping etc including form work for poles all as specified and directed.

Supplying, laying, jointing & commissioning in replacement of cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminum conductor, 11000 volts grade, (Earthed) cross sectional area 95 sqmm 3 core as per IS 7098 Pt-II complete all as specified and directed. Make:- KEI /HAVELLS/UNIVERSAL/POYCAB/ASIAN/RPG

S&F of cable jointing Kit 11 KV (earthed) grade cable for outdoor type end termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Aluminium conductor cable of size 95 sqmm complete all as specified and as directed. Make :- 3M/Denson/Raychem/M seal

S&F in replacement of cable jointing Kit 11 KV (earthed) grade cable for outdoor type end termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Aluminium conductor cable of size 120 sqmm complete all as specified and as directed. Make :- 3M/Denson/Raychem/M seal

S&F in replacement of cable jointing Kit 11 KV (earthed) grade cable for outdoor type end termination heat shrink type joint complete with jointing material and accessories suitable for single core XLPE armoured Aluminium conductor cable of size 95 sqmm complete all as specified and as directed. Make :- 3M/Denson/Raychem/M seal

Excavation in trenches in any type of soil n exc 1.5 mtr in width and n. exc 1.5 mtr in depth and getting out all as required for laying of cables,Foundation filling of poles or stays complete all as specified and directed.

Excavation in trenches in any type of soil not exc 1.5 mtrs wide and exc 1.5 mtr in depth for laying of pipe/ cables/ poles etc and getting out complete all as specified and as directed.

Returning filling, in including spreading ,leveling, watering and well ramming in layers not exc 25 cm each all as required complete all as specified and directed.

Removing excavated material to a distance not exceeding 50 meters and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

M&L for PCC cable cover class HV type 1 flat size 300 mm x 180 mm x 40 mm, ISI marked across the cable for protection of cable after sand cushioning complete all as specified & directed.

M&L for fine and clean sand (river sand) free from sharp materials in trenches for cushioning of cable 8 cm thick under cable and 15 cm thick over the cable including gently punning complete all as specified and directed . Note:- The total thickness of sand shall be measured 18 cm after punning.

M&L for steel tubing galvanised, light grade ISI marked, complete with fittings laid in trenches/fixed along with poles etc as protection to cables of size 80 mm dia bore complete all as specified and directed. Make:- Prakash/ Surya/Jindal/TATA/BST

M & L for road cutting incl excavation in trenches for laying HT UG cable in pipe not exc 45 cm wide and n.exc 90 cm depth or as per site requirement including laying of GI pipe 100 mm dia light grade making good the disturbed surfaces with cement concrete (1:3:6) type C-1 and top surface neatly finished as per existing to match with the existing complete all as specified and directed. Note :- rate of 100 mm GI pipe (light grade) included in quoted rate

S & F cross arms, bracing, supports clamps and back plates fabricated from structural steel sections incl nuts & bolts, washers, welding bending cold or hot, drilling holes for bolts in any shape or size as directed and inclusive of one red oxide primer coat, one under coat and one finishing coat of synthetic enamel paint incl taking down complete all as specified and directed.

M & L for taking down of unserviceable aluminium conductor steel reinforced (ACSR) of any description /size & in any position from existing HT poles or lines complete all as specified and directed.

M & L for taking out of unserviceable insulators of any type and any position from HT poles complete all as specified and as directed.

M & L for taking down of existing unserviceable cross arms, mild steel channel or angle sections etc complete all as specified and as directed.

M&L for repair/replacement of earthing complete with galvanised steel earth plate electrode of size 60cm X 60cm X 6 mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50 mtr below the ground level connected to galvanised earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanised iron or steel all as shown in electrical plate No 5 of MES SSR Part-1 connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanised iron 40 mm dia. light grade pipe and watering pipe shall be 20 mm ore medium grade PCC pipt with pre cast RCC cover, charcoal/salt funnel etc. complete all as specified and directed. Note : The conctrete pit shall be PCC 1:3:6 type C1, 40 mm thick PCC slab of RCC (1:2:4) type B-1 using 20 mm graded stone aggregate reinforced with 8 mm TMT bars on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No.5 of MES SSR Part-1 (ii) PCC pits shall be provided atleast 500 mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe, bends, elbows etc shall be deemed to included in the quoted rate. (iv) Item includes the cost of 7.5 m length earth strip.

M&L for earthing complete including necessary excavation and earth work in any type of soil with galvanized steel earth plate electrode size 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtrs below ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level connected to galvanised earth strip 32x6 mm by means of bolts nuts check nuts and washers of galvanised iron or steel all as shown in electrical plate No.5 of MES SSR Part-1 connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanised iron 40 mm dia. light grade pipe and watering pipe shall be 20 mm ore medium grade PCC pipt with pre cast RCC cover, charcoal/salt funnel etc. complete all as specified and directed. Note : The conctrete pit shall be PCC 1:3:6 type C1, 40 mm thick PCC slab of RCC (1:2:4) type B-1 using 20 mm graded stone aggregate reinforced with 8 mm TMT bars on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No.5 of MES SSR Part-1 (ii) PCC pits shall be provided atleast 500 mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe, bends, elbows etc shall be deemed to included in the quoted rate. (iv) Item includes the cost of 7.5 m length earth strip.

M/S RAJ KUMAR SINGH

m/s gupta trading