SPECIAL REPAIR TO BLDG NO LS 05 (ERST WHILE APPS BK) AT SHILLONG CANTT SPECIAL REPAIR TO BLDG NO LSM 07 (FPO BLOCK) AT SHILLONG SPECIAL REPAIR TO BLDG NO P 147 COOK HOUSE AND DINING HALL AT SHILLONG CANTT UNDER GE SHILLONG

Amount

Dismantling plain or corrugated steel sheeting, any guage, thickness incl nainital or similar pattern as in roof coverings complete all as specified and as directed.

Dismantling Timber scantlings 40 sq.cm and over in section in any position framed work complete all as specified and directed

Taking down chowkat or frame exc 1.5 Sqm but n.exc 4 Sqm each (without taking off shutter from the frame) complete all as specified and as directed.

Taking down chowkats or frames n. exc 1.50 Sqm each with shutters (without taking off shutter from the frames) complete all as specified and as directed.

Taking down shutters of any description nexc 1.0 Sqm refixing in same opening complete all as specified and as directed.

Taking down shutters of any description nexc.1.0 Sqm each complete all as specified and as directed.

Taking down shutters of any description exc.1.0 Sqm but n.exc 2.0 sqm each complete all as specified and as directed.

Demolition of Brickwork/solid concrete block work built in Cement mortar complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Dismantling Wall and Ceiling Boards (Fibre ,Pulp,insulation ,etc)or insulation boards /slabs/blankets ,any thickness,including cover fillets complete all as specified and as directed.

Dismantling floor hearth (or) wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid in any mortar complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for incl (reinforcement cut as reqd to facilitate demolition) complete all as specified and as directed.

Taking up or down steel tubing and disconnection, for 15mm bore of pipes complete all as specified and as directed.

Taking up or down steel tubing and disconnection, for 20mm bore of pipes complete all as specified and as directed.

M&L for wrought second class hard wood in scantlings framed and fixed complete all as specified and directed

Fixing only for wrought second class hard wood in scantlings framed and fixed complete all as specified and directed

S&F pre-painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick as in roof covering including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour complete all as specified and directed

S&F pre-painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick as in roof covering including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour complete all as specified and directed

S&F 2 mm thick fibre reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof , wall etc complete all as specified and as directed

S&F GI Frame work for snaprid false ceiling comprinsing of GI perimeter channel 0.55mm thick with main T - flange of 25mm and web of 30mm fixed to surrounding wall angle with flange and web 25mm each , cross T with flange 25mm and web 25mm fixed to main T , main T is suspended from soffit @ 1200 mm C/C using GI wire of 4mm thickness GI frame will be 60cm x 60cm to receive E-board celling complete all as specified and as directed..

M&L for 4mm thick E Board 600x600 mm prepainted fibre boards ceiling designer/decorative type with different designs as approved by the Engr-in-charge fixed or laid in ceiling timber /GI/ aluminium frame work in ceiling flat or sloping complete all as per manufacturer instruction complete all as specified and as directed..

M&L for 2nd class hard wood in scantling clean sawn timber fixed all complete all as specified and as directed.

M&L for Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with Two coats of Creosote oil complete all as specified and as directed.

S&F solid PVC door frame of size 50 mmx 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specifiecation complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement supplying and fixing in the fram at site as per specification and drawing complete all as specified and as directed.

S&F factory made solid PVC moulded door shutter with particle board core 28 to 30 mm thick (stiles) with 2,4 or 6 raised panel design with 2 mm thick moulded PVC sheet on front face & 2 mm plain colour PVC sheet on back face as per specification complete all as specified and as directed.

S&F 30 mm thk Flush door shutters solid core construction with block board core and ply wood face pannels commercial veneered on both faces complete all as specified and as directed.

M &L for 35mm thick of 2nd class hard wood glazed skeleton shutters open rebated and prepared to receive glass gauge etc (Without sash bars) , edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass etc complete all as specified and as directed.

S&F powder coated (min powder coating 50 micron) anodised aluminium frame for doors, windows , ventilators plain or sliding type with one or more rebates including joining cleat for fixing etc complete all as specified and as directed

S&F powder coated(powder coating min 50 micron) anodised window and ventilator shutters side hung/sliding type without sash , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150 mm long(1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no ) incl stainless steel wire cloth complete all as specified and as directed.

S&F powder coated(powder coating min 50 micron) anodised door shutters , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , handles 2 nos in each door , hinges , anodised aluminium snap beading screws etc complete all as specified and as directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and as directed.

M&L for 4.80 mm thick sheet glass quality and glazing fixed to aluminium frame exc 0.50 sqm complete all as specified and as directed.

M&L for 4.80 mm thick frosted sheet glass quality and glazing fixed to aluminium frame exc 0.50 sqm complete all as specified and as directed.

M&L for precast concrete 1:2:4, Type B-1 using 20 mm gradded stone aggregate in in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain face etc. set in cement mortar 1:4 complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L for 75mm thick PCC 1:4:8 type D2 as in subfloors finished even and rough without using extra cement complete all as specified and as directed.

M&L for vitrified tiles lightshade (square /rectangular) polished area of each tiles exc 0.36 sqm but nexc 1.00 sq min floors laid over and incl. 20mm thik CM 1:6 screed bed jointed in neat cement slurry and pointed with coloured cement to match the tilescomplete all as specified and as directed..

All as Per Item no 37 above but in vertical surfaces such as skirting / dado laid over and incl. a backing coat of 10mm thk CM 1:4 complete all as specified and as directed.

M&L for 18/20mm thk granite slab ( as in table top rubbed and polished) as in counter basin fixed in CM 1:4 , pointing in white cement 1:2 using granite dust with admixture of pigment to match complete all as specified and as directed.

Labour only for chamfer , splays or arris in facework of Granite not exc 15mm wide complete all as specified and as directed.

M&L for non skid ceramic white tiles 7 to 8mm thk area of each tile exc 0.11 sqm but n exc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar laid over and including15 mm thick cement screed bed in CM 1:6 complete all as specified

M&L for non skid ceramic white tiles 7 to 8mm thk area of each tile exc 0.18 sqm but n exc 0.36 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar.Laid over and including15 mm thick cement screed bed in CM 1:6 complete all as specified and as directed.

M&L for vitrified tiles darkshade (square /rectangular) polished area of each tiles not exc0.36 in floors laid over and incl. 20mm thk CM 1:6 screed bed jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and as directed.

All as Per Item no 43 above but in vertical surfaces such as skirting / dado laid over and incl. a backing coat of 10mm thk CM 1:4 complete all as specified and as directed.

M&L for non skid ceramic white tiles 7 to 8mm thk area of each tile exc 0.06 sqm but n exc 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar laid over and including15 mm thick cement screed bed in CM 1:6 complete all as specified and as directed.

M & L for glazed ceramic Coloured Tile 300x450x7mm/300x600x7 mm thick in Skirting, Dados, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Colour Cement to match laid over a backing coat of 10mm thick CM 1:4 screed, complete all as specified and as directed.

M&L for 20-25 mm thk kota stone slab flooring over cement screed base 20 mm thick in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incl rubbing and mirror polishing complete all as specified

M&L for for treating the existing surface with beewax polish complete all as specified and as directed.

S&F 15/16 mm thick pvc boards fixed with screws to timber frame complete all as specified and as directed

S&F 12 mm thick pvc boards fixed with screws to timber frame complete all as specified and as directed

S&F 0.90 mm thick pvc decorative laminates type 1 of surface finish color and pattern as approved fixed with approved adhesive as per manufactures instruction complete all as specified and as directed.

M& L for prelaminated particle board of 9 mm thk board ,interior grade ,prelaminated one side with decorative choice lamination & other side balancing , white lamination , fixed with screws to timber frame work complete all as specified and as directed.

S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete width of flap 30mm complete all as specified and as directed.

S&F cutting chases, pinning in concrete block workmaking good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth complete all as specified and as directed.

M&L 75mm dia PVC(SWR)floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

M&L for 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specified and as directed.

M&L for 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specified and as directed.

S&F PVC (SWR) bends 110mm dia complete all as specified and as directed

S&F PVC (SWR) bends 75mm dia complete all as specified and as directed

S&F PVC(SWR) 75mm dia vent cowls complete all as specified and as directed.

S&F Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays ,incl bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed.

S&F PVC Connections 15mm size with PTMT Nuts of length 450mm and fixed,complete all as specified and as directed.

Supply and Laying Steel Water Tubing 15mm dia (Bore), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.

All as per Item 64 above here-in-before, but for 20mm dia (Bore).

S&F in repairs Brass CP angular stop cock fancy type with Capstan heads complete all as specified and as directed.of make Jaguar/Marc/Parryware

S&Fin repairs Towel ring square shape stainless steel complete all as specified and as directed.of Make Jaguar Cat Part No:-AKP-35721P or equivalent in Marc/Parryware/Prayag

S & F in repairs Towel rack 600mm long with lower hangers , stainless steel of make Jaguar Cat Part No:-AKP-35781PS or equivalent in Marc/Parryware/Prayag

S & F in repairs Vitreous China EWC including seat cover closed pattern single piece size 755x365x655 complete all as specified and as directed.of make Jaguar Cat Part No :- LYS-WHT-38851PSM or equivalent in make cera, parryware or Hindware

S & F in repairs Vitreous China EWC with P or S Trap including seat cover closed pattern with flat bottom and cover and MS CP hinging device, PVC flush bend pipe incl PVC Flushing Cistern 10 LITRE capacity, Low Level Valve Less, Symphonic Action type, White, with Inlet, Ball Valve, Float and Handle including 32mm dia PVC Flush Pipe, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 including taking down unserviceable Flushing Cistern and connected Items of any description, complete all as specified and as directed.

S&F in repairs Brass chromium plated bottle traps 32 mm dia for wash basins with inlet and outlet screwed for pipe or connections incl necessary packing uniun and cap and fixed in repairs complete all as specified and as directed.

S&F vitreous China clay wash hand basin of size 550x400mm with pedastal incl brackets for fixing complete all as specified and as directed

S&F in repairs vitreous China under counter basin oval shape with fixing accessories table top WHB of make Jaguar Cat Part No:-FLS-WHT-5701 size 555 x 425 x 195 mm incl waste coupling of Cat Part No:-ALD-727 complete or equivalent in Hindware/Cera/Parryware

M&L for 3 hole basin Mixer without pop up waste system, 20mm cartridge system Cat No- FLR-5189N of M/s Jaquar or equivalent complete all as specified and as directed.

S&F brass 150 mm long barrel tower bolts with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed.

S&F brass 100 mm long barrel tower bolts with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed.

S&F extruded fancy type Brass handles fabricated type of size 150 mm complete all as specified and as directed.

S&F extruded fancy type Brass handles fabricated type of size 100 mm complete all as specified and as directed.

S&F butt hinges 100 mm extruded brass with mild steel hinge pin bright polished and fixed type B-11 complete all as specified and as directed.

S&F butt hinges 100 mm medium weight mild steel cold rolled and fixed complete all as specified and as directed.

S&F Aluminium anodised barrel tower bolts of extruded section and fixed complete 150 mm long complete all as specified and as directed.

S&F extruded aluminium alloy handles fabricated type anodised of size 150 mm complete all as specified and as directed.

Excavation in foundation trenches n.exc 1.50m wide and n.exc 1.50m in depth and getting out in soft /loose soil complete all as specified and as directed.

Returning, filling in, including, spreading, leveling, watering and well ramming in layers n.exc 25cm complete all as specified and as directed..

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.50m above the starting point complete all as specified and as directed.

M&L for PCC (1:4:8) type D-2 using 40mm graded machine crushed stone aggregate as in foundation complete all as specified and as directed.

M&L for foundations, including rafts, footings , plinth beams, bases for columns etc type nominal mix (1:1.5:3) (20 mm graded aggrgate) complete all as specified and as directed.

S&F iron angle for water tank staging and like structures incl caps, bases , splices etc built up from two or more angles including stiffeners, gusse plates etc complete of Fe-290 (Gde E 165) all as specified and as directed

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick or concrete work in CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick or concrete work in CM 1:4 and mixing with WPC @ 3% by weight of cement finished even and smooth without using extra cement complete all as specified and as directed. Note : WPC shall be measured and paid separataly as supply only.

Supply only Integral waterproofing compound complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

S&F framed work such as grills, gratings etc with ends of bars shouldered or riveteted or forged into spikes, framed guard bars conforming to FE 290 Gde E-165 complete all as specified and directed.

M&L for rotational moulded 3 layered Polythene water storage tank 1000 Ltr capacity ( cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I incl all fittings as reqd complete all as specified and as directed.

M&L for cement concrete in surface channels and drains type C2 1:3:6 (40 mm graded aggregate ) complete all as specified and as directed.

M& L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitred/stopped ends etc complete all as specified and as directed.

Add or deduct for each 25 mm girth or part thereof over or under 30 cm ditto complete all as specified and as directed.

M & L for precast cement concrete block massonry with solid blocks exc 10 cm in width and settings in CM 1:6 type C1 1:3:6 (20mm graded aggregate) complete all as specified.

M& L precast cement concrete block massonry with solid blocks nexc 10 cm in width and settings in CM 1:4 type C1 1:3:6 (20mm graded aggregate) complete all as specified.

M&L for preparation of new wall surfaces and applying two finishing coats of oil bound distempering over 1mm of wall care putty complete all as specified and as directed.

M&L for preparation of new wall surface and applying two finishing coat of acrylic emulsion paint , anti fungal resistance , dirt resistance exterior paint of required shade including primer coat on new surfaces complete all as specified and as directed.

M&L for complete removal of existing wall treatment on wall surfaces and applying two finishing coats of acrylic emulsion paint , anti fungal resistance , dirt resistance exterior paint of required shade over 01 mm thick of wall care putty complete all as specified and as directed.

M&L for complete removal of existing wall treatment surface and applying two finishing coat of acrylic emulsion paint , anti fungal resistance , dirt resistance exterior paint of required shade including primer coat complete all as specified and as directed.

M&L for complete removal of existing treatment old decorated wall surfaces and applying two finishing coat of oil bound distempering over 1mm of wall care putty incl complete all as specified and as directed.

M&L for preparation of old steel surfaces of any description not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over one coat of red oxide zinc chromate primer complete all as specified and as directed.

M&L for preparation of old/ new wooden surfaces of any description not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint complete all as specified and as directed.

S&F in repairs 20 mm dia harrison rails, chromium plated with wooden finished fancy type with fixing brackets stops , rollers etc all as directed and specified.

S&F in repairs 20 mm dia double rod brackets stops , rollers etc wooden finished all as directed and specified.

Fixing only chain link fencing incl line wires any mesh size and type complete all as specified and directed

Supply only chain link MS Galvanised fencing complete as all specified and as directed.

Excavation in post holes ( or similar holes ) in soft/ loose soil each nexc 0.50 cum getting out returning filling in and ramming earth complete all as specified and directed

M&L for framed work as in doors or gates of angle or other section of FE-290 (Gde-E-165) incl fastening and fixing complete all as specified and directed

M&L for mild steel work as in post and struts in fencing of angle or other section incl cutting tops to shape as directed Fe-290 Gde E-165 complete all as specified and directed

M&L for 2nd class hard wood Plain fillets square , rectangular or triangular in section , clean swan secured with nails sectional area exc 13 sqcm nexc 25 sqcm incl dismantling complete all as specified and as directed.

S&F 5 mm thick PVC sheet fillet of 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and as directed.

S&F solid PVC wall panelling consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifiecations and drawing complete all as specified and as directed.

M & L 75mm thick PCC 1:3:6 type D2 as in plinth protection complete all as specified and as directed.

S&F for stainless steel drawer box 500mm of any colour with provn for double rail rolling system complete all as specified and directed by Engr-in-charge

S&F for stainless steel swing try left or right complete all as specified and directed by Engr-in-charge

S&F for stainless steel carrousel 650 mm dia complete all as specified and directed by Engr-in-charge

S&F for stainless steel soft spring system complete all as specified and directed by Engr-in-charge

S&F for clip on cabinet hinge full overlay complete all as specified and directed by Engr-in-charge

S&F plain stainless steel basket of size 420x485x200mm complete all as specified and directed by Engr-in-charge

S&F plain stainless steel cup & saucer basket of size520x585x100mm complete all as specified and directed by Engr-in-charge

S&F plain stainless steel perforated cutlery basket of size 470x485x100mm complete all as specified and directed by Engr-in-charge

S&F plain stainless steel grain trolley of size 525x485x350mm complete all as specified and directed by Engr-in-charge

S&F ball bearing drawer channel of size 600 mm long complete all as sspecified and as directed by Engr-in-charge

S&F stainless steel single cutlery insert 500mm long complete all as sspecified and as directed by Engr-in-charge

PART -II SCHEDULE E & M Taking down carefully copper/aluminum point wiring light/fan/sockets out let/power point complete (fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc. are to be measured separately) and/or drawing out from existing conduit/batten and making good disturbed surface of walls/floors/ceiling, complete all as specified and as directed.

Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, in PVC Casing capping on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light point controlled by one switch. Note :- Switch, socket and fan regulators to be measured and paid for separately .

Description all as per Srl item No.132 above but for one bell point controled by one bell push .

Description all as per Srl item No132 above but for socket outlet point 5 Amp on same board.

Description all as per Srl item No.132 above but for socket outlet point 5 Amp on Independent board.

Description all as per serial item No132 above but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point) complete all as specified.

Supply and fix switch piano (ISI marked) Single pole 240 volts, 5Amps all as specified and directed. Make- Havells/anchor/ Legrand.

Supply and fix bell Push (ISI marked) Single pole 240 volts, 5Amps all as specified and directed. Make- Havells/anchor/ Legrand.

Supply and fix socket (ISI marked) 2/3 pin and 5 Amps, flush type, 240 volts complete all as specified and as directed. Make- Havells/anchor/ Legrand.

Supply and fix switch socket combination (ISI marked) 2/3 pin and 5/15 Amps, flush type, 240 volts complete all as specified and directed. Make- Havells/anchor/ Legrand.

Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified. Make : Cona , Plaza, Anchor .

Supply and fixing call bell ding dong, AC, 230 V, Single pole ISI marked all as specified and directed. Make- Havells/anchor/ Legrand.

Supply and fixing LED batten fittings 1x18 Watt complete pre wired fixed to wall with 2 nos PVC block of suitable size including taking down old unserviceable one complete all as specified and as directed. .

S & F wall mounted LED batten fittings with all accessories 1X 9 Watt LED / foot light 6000K , extruded polycarbonate, integrated electronic driver and fixed to wall with 2 Nos PVC block suitable size complete all as specified and as directed including taking down old unserviceable light fittings complete all as specified and as directed.

S & F Exhaust fan 230 volts , 250mm,plastic body including making all electric connection complete all as specified and as directed including cutting of hole on wall and makng good disturbed surface of wall and outer wooden box for fan fix on wall complete all as specified and as directed. Make Bajaj/Havell's/CG.

Supply and fixing LED security Building light LED 25 Watt , pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light complete all as specified and as directed. Make:- Bajaj Cat part No- 169821 LED/CG as perr vat No LSTO 25 CDL equivalent model as in Surya / havells .

Supply and fix in repairs MCCB DB 4 way vertical sheet metal enclosure TPN 415 volts, 50 Hz, with IP-43 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified. . (Note : MCB SP/TPN shall be measured and paid seperately under appropriate items of this schedule . Note : Copper thimble shall be used for connection of cable .

Supply and fix MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 12 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking down old one unsv one complete all as specified and directed. Make: Havells Cat part No DHDPSHODRW12 or equivalent in Schnieder/GE/C&S.

Supply and fix MCCB TPN, 240 Volts, 40 to 63 Amps, 10 kA rupturing capacity415 Volts complete all as specified and directed including taking down old one complete all as specified and as directed. .

Supply and fix MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed including taking down old one complete all as specified and as directed. . Make: Havells Cat part No - DHMCCDPF006-032 or equivalent in Schnieder/GE/C&S.

Supply and fix in repairs MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's.Make : Hager as per cat part- NCN106N, Schneider as per cat No : A9N4P32C or Indoasian as per cat No : 81195.

M & L Sub main wiring with two runs of single core 6 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including PVC Casing / capping, ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 6 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding taking down old wiring etc complete all as directed.Note: (i) Two runs of 6 sqmm as cable and one run of 6 sqmm earth wire and one run of PVC casing / capping shall be measured as one RM. (ii) Cutting of chases in the wall of appropriate size shall be carried out with electric cutter machine . (iii) Necessary plastering in the disturbed surface of wall and distempering /white washing to match the existing colour shall be included in the unit rate quoted.

M & L for sub main wiring with two runs of single core 4 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including PVC Casing / capping ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 4 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding taking down old wiring etc complete all as directed.Note: (i) Two runs of 4 sqmm asPVC cable and one run of 4 sqmm as earth wire and one run of PVC casing / capping shall be measured as one RM.

Excavation in trenches not exceeding 1.5mtr. In depth and not exc 1.5mtr in width and getting out in soft/ loose soil for laying of cable etc complete all as specified and as directed.

Returning ,fillling in trenches,spreading ,levelling,watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed. .

Removing excavated material/ surplus soil and depositing where directed at a distence not exceeding 50mtr.at a level not exceeding 1.5 mtr from starting point complete all as specified and as directed.

Supply lay/spread in trenches , river sand ,clean ,including spreading ,levelling ,punning for laying /cushioning of cables all as specified and as directed.

Supply lay in trenches fly ash bricks, old size sub class “B” for cable protection.

Supply, lay in trenches, floors ,fix on wall/pole, passing through pipes etc.,LT UG cable , 1100 volts grade, PVC/ XLPE insulated , with multistranded aluminium conductors, armoured with galvanised steel wire or tape ,gland, lugs etc , of size 16 Sq.mm 4 core , confirming to IS specifications complete all as specified and as directed.

Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I complete all as specified and as directed.

M/S T N CONSTRUCTION