WBPWD/EE/ HED / NIeT-23 of 2025-26

25mm size 7(b)/ E-16 ]

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in 19mm/25mm prelaid polythene pipe/PVC rigid conduit as per GS 2x(4 sqmm)+1(2.5sqmm) [ 1(v) / E- 9 ]

S&F solderless copper socket by crimping of copper wires . 2.5 sq mm [9(i) / F-5]

4 sq mm [9(ii) / F-5]

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment . 4 way ( Make - Legrand/Siemens/L&T as approved by E.I.C ) [ 14 / D- 10 ] . [LTTD04N]

Supplying and fixing 240/415 V MCB lsolator on din rail of existing DBs and necessary connection as per GS [Make Legrand/ Schneider/Siemens/ Crabtree/ L&T) as per direction of E.I.C ] 63A FP [6/D-5]

Laying of cable from 3/3.5 core 35 sqmm to 50 sqmm on wall/surface incl S & F MS saddles with earthing attachment in 2 x 10 SWG Gl (Hot Dipl Wire, making holes etc. as necy , mending good damages and painting [ 2(C)/F- 1]

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : 4 Core 35 sqmm [7(c)/F-4]

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module Gl Modular type switch board with 4 Module top cover plate flushed in wall incl S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [17lE-19]

Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Brand approved by EIC) & necy. Connections [5(b)/E-17]

SITC of 2.0 ton capacity Hi-wall split Air -conditioner machine fitted with hyper tropical rotary compressors suitable for Refrigerant -R410A/R32, cooling capacity-24000 btu/hr , air flow -800 cfm of rated power supply 230 V-1 Ph-50 Hz along with all accessories (Make- Mitsubishi Electric/O-General or euivalent model approved by EIC). incl. Supply & fixing required Angle Iron Structure on wall & mending works as per direction of E.I.C.

Supply & laying Add-on items- 5/8"(for suction) & 1/4'(for discharge ) copper refrigerant pipe with 9mm thick nitrile rubber insulation , 4 core x 2.5 sqmm . Copper cable including fixing arrangement and wrapping insulation of aerotape complete in all respect for ( 1.5tr. & 2tr. A.C. Machine and supply & laying PVC Drain Pipe 25mm dia by saddling on wall incl. PVC "T" ,elbow, bend etc as per direction of E.I.C.

1. THE AGENCY MUST PROCURE THE MATERIALS FROM THE MANUFACTURER/OEM OR FROM THEIR AUTHORIZES. SALES CHANNEL SO THAT THE STANDARD WARRANTY / SUPPORT OF THE MANUFACTURER / OEM BECOMES APPLICABLE TO THE PRODUCTS TO BE DELIVERED AND INSTALLED BY THEM. 2. DOCUMENTS THAT AUTHENTICATES SUCH PROCUREMENT FROM THE MANUFACTURER/OEM OR FROM THEIR AUTHORIZES SALES CHANNEL SO THAT THE STANDARD WARRANTY / SOPPORT SHOULD BE SENT FROM THE e-MALE OF THE MANUFACTURER/OEM / AUTHORIZES SALES CHANNEL TO THE e-MALE OF ENGINEER-IN-CHARGE AND HARD COPY OF IT TO BE SUBMITTED DURING EXECUTION OF WORK/ SUBMISSION OF BILL. 3. IF ANY REFURBISHED MATERIAL IS SIPPLIED ABD INSTALLED, PENAL ACTION WILL BE TAKEN AS PER EXISTING RULES.