Providing repairs to Electrical Installations in CGM Bungalow ,SP Road, Secunderabad

Amount

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed steel/ PVC conduit as required. a)1 run of cable

b) 2 run of cable

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) a) 8 way, Double door

b) 12 way Double dooor

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) a) 4 way (4 + 12), Double door

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) Single pole

b)Double pole

c)Triple Pole 63A MCB

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) Four Pole 63 A Isolator

b) Four Pole 100A Isolator

Supplying and fixing of following ways surface/recess mounting, vertical type, 415V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200A tinned cpper bus bar, common neural link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. a)8 Way (4+24), double door

Supplying and fixing 100A 4Pole MCCB along in a suitable SS enclosure and spreader terminals with 30kA breaking capacity and 80-100A thermal capacity including cable termination, testing, commissioning etc., as required.

Supplying and fixing of 1 x 20W (4' length) LED Box Type general purpose Luminaire suitable for operation on 230V, 50HZ AC supply and connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, earthing, interconnection, testing etc., as reqd. (M/s.Crompton DIJB12LT8-20, Philips or ss make)

Supplying and fixing of 4 feet 20W LED tube, suitable for the existing 1 x 20W (4' length) LED Box Type fitting and operating on 230V, AC supply i/c interconnections, testing etc., as reqd. (M/s Crompton/SS make)

Supplying and fixing of bed lamp fitting 3W LED wall mounting plastic/metal body bed lamp suitable for operation on 240V, 50Hz, AC supply including interconnections, testing etc., as reqd.

Supplying and fixing of 2 feet 10W LED tube light fitting, suitable for operating on 230V, AC supply i/c interconnections, testing etc., as reqd. (M/s Crompton/SS make)

Supplying and fixing of 18W surface/recess Square LED light fitting of metalic/plastic body suitable for operation on 240V, 50Hz, AC supply including interconnections, testing etc., as reqd. M/s Philips, CG, Wipro or SS make

Supplying and fixing of 1200mm Sweep Ceiling Fan suitable for operation on 240V, 50Hz, AC supply including interconnections, testing etc., as reqd. M/s Havells or SS make

Supplying and fixing of 12" sweep metal body light duty Exhaust fan suitable for 230volts, 50Hz AC Power supply etc., as required.

Supplying and fixing of 5 Litres Capacity 3KW instant Geyser including interconnections, plumbing connections, testing suitable for 230volts, 50Hz AC Power supply etc., as required. (Ms Crompton or similar superior make)

Supplying and fixing of 30W LED street light fitting including interconnections etc., as required. (Crompton Astra Neo LSTS-30-CDL-M or SS Make)

Supplying and fixing of retrofit gate light fitting i/c 26W LED lamp suitable for B22 base for existing lamp post including removing of faulty fitting and minor suitable modification for new fitting etc., as required. (Make: Crompton greaves / SS)

Supplying and fixing 2 core 6 sq.mm Weather proof Aluminium wire along with 14 SWG GI wire from pole box fitting i/c interconnections etc.,as required.

Supplying and fixing of 26W LED type garden light fitting inlcuding replacing faulty fitting, cabling, Control box, painting the pole etc., as required.

Supplying and laying of 2 core 1.5 sq.mm copper conductor round cable from pole box to fitting etc., as required.

Supplying and fixing of Weather proof Pole boxes with suitable MS clamps for fixing along with 6A connector and 6A SP MCB (make:Sintex or SS make)

Supplying and fixing of 25mm dia GI pipe bracket suitable for mounting the LED type fitting including fixing the bracket on the surface of wall, etc as required.

SITC of 0.5 HP openwell submersible horizonal water pump set suitable for 240volts,1ph AC supply along with necessary control switch gear, pipe line connections etc., as required. Make : Crompton or SS Make

Removing and Relaying of existing armoured compound light pole with suitable clamps etc., as requried.

Checking of compoud light cable terminations/ pole boxes / connectors / MCBs for finding the fault etc., as required.

Earthing with G.I earth pipe 4.5 metre long, 40mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc., with charcola/ coke and salt as required.

Supplying and laying 6 SWG GI wire at 0.50 metre below ground level for conductor earth electrode, including connection / termination with GI thimble etc., as required.

Removing of old faulty DPIC switch, kit kat fuse cut outs by disconnecting cable terminals from the feeder pillar box etc., as required.

Providing repairs to feeder pillar box with suitable new MS door, hinges by cutting, welding, painting with necessary rubber beading on site etc., as required.

Liasoning with TG SPCDL authority in co ordination for providing feeder pillar box for power shut downs etc., as required

Dismantling of the existing 1.5 TR split AC unit both indoor and outdoor units with copper pipe lines and cable, flexible pipe and its accessories i/c pump down of gas etc., as reqd.

Dismantling the existing 1.5 TR Window AC unit and closing the window opening with 12mm thick plywood etc., as reqd.

Installation, Testing and commissioning of 1.5 TR Split AC unit along with the existing copper piping (if usable) including gas releasing, insulation, making opening in brick/stone wall for passing the copper pipes and making good the damages etc., as required.

Installation, Testing and commissioning of 1.5 TR window AC unit in the existing window opening by interconections etc., as required.

Shifting of 1.5 TR Split AC indoor/outdoor units along with all accessories like copper pipes, OD Stands etc., from Staff Qtr at Jubilee Hills to CGMT quarters at Paradise including lifting, safe loading and unloading and transporting by hiring vehicle etc., as required.