Loading…
Loading…
Tender Value
₹4.9 Cr
EMD Value
₹9.8 L
Closing Date
10 Oct 2026, 12:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
S AND T
14 conditions · 2 needing a document upload
Financial Eligibility Criteria ( para 10.2 of GCC 2022 )The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less, where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. (Ref:GOI, Ministry of Railways, Railway Board, New Delhi. Advance Correction Slip No.1 of IRGCC ,April 2022 Lr.No.2022/CE- I/CT/GCC-2022/Policy Dt:14.07.2022 )
Technical Eligibility Criteria ( 10.1 part 1 of GCC 2022) (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b)(1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre- defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be sub letted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract.
Defination of Similar Work :- Supply, installation testing & commissioning of Automatic Fire Detection & Alarm System in any government organization or PSUs. It can be an independent work or part of any signalling work.ORSupply, installation testing & commissioning of Automatic Fire Detection Alarm and suppression System, in any government organization or PSUs. It can be an independent work or part of any signalling work.
14 conditions · 6 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
I/We have visited the works site and I/ We am/ are aware of the site conditions and IRGCC 2022,Correction slips of the GCC.
Name of the work:- Provision of RDSO type Fire & Smoke detection Alarm system with Fire aspiration system at all the interlocked LC gates and Intermediate Block signalling huts over Secunderabad Division.
C_SG_36_622~SCR
C_SG_36_622
Open
Works - General
12 Months
Hyderabad, Telangana
₹0
₹9.8 L
18 Sept 2026
18 Sept 2026
26 Sept 2026
46 items across 3 schedules · ₹4,91,34,206.88 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Printing, Binding & supply of registers with latest proforma given by in-charge officer each register of 100 pages..(To Be Inspected by CONSIGNEE)(ITEM UNIT IS PER REGISTER) | Numbers | 250.00 | 358 | 89,500 |
| 2 | Supply o f titanium coated 7.2 mm drill bits of TATA / Bosch/Addision make. (To Be Inspected by CONSIGNEE) | Numbers | 200.00 | 146 | 29,200 |
| 3 | Supply of Electric Track Drilling machine shall be suitable for operating on 110V, 50Hz AC / DC fully insulated and no-load RPM shall be 1 9 0 0 / 1000 and the power input is 550W. Machine with suitable inter changeable track mounting stand and drilling to be designed with adjustable facility and along with a set of 20 no's of 7.2 mm dia Bosch MSS drill bit, Drill check dia. 13 mm and drilling dia in steel 8 mm / 13 mm along with packing accessories. (To Be Inspected by CONSIGNEE) | Numbers | 5.00 | 22,602 | 1,13,010 |
| 4 | Supply of Universal Locks with one steel key for every ten locks or part there of (For example, if locks ordered is 10, 1 key is to be supplied and if locks ordered is 20, 2 keys to be supplied. However, 2 keys to be supplied if locks ordered is between 11 and 19). (To Be Inspected by CONSIGNEE) | Numbers | 100.00 | 195 | 19,500 |
| 5 | Supply of Godrej shelf storage of 916 x 486 x 1981 mm or similar (To Be Inspected by CONSIGNEE) | Numbers | 5.00 | 26,479 | 1,32,395 |
| 6 | Supply of Double key lock for relay room. (To Be Inspected by CONSIGNEE) | Numbers | 50.00 | 1,233 | 61,650 |
| 7 | Fuse link 1A / 2A / 6A / 10A / 16A / 20A as specified by Engineer In charge. (To Be Inspected by RDSO) | Numbers | 1723.00 | 31 | 53,413 |
| 8 | Supply of Lugs and Eyelets: Aluminium lugs 25 sq.mm of reputed make. (To Be Inspected by CONSIGNEE) | Numbers | 3000.00 | 25 | 75,000 |
| 9 | Copper lugs 10sq.mm of reputed make. (To Be Inspected by CONSIGNEE) | Numbers | 3000.00 | 12 | 36,000 |
| 10 | Copper eyelets to suit 16/0.2 wire Dowell's or similar make. (To Be Inspected by CONSIGNEE) | Numbers | 5000.00 | 3 | 15,000 |
| 11 | Copper eyelets to suit 10.sqmm wire Dowell's or similar make. (To Be Inspected by CONSIGNEE) | Numbers | 3000.00 | 6 | 18,000 |
| 12 | Supply of Surveyor's Wheel (rodometer). (To Be Inspected by CONSIGNEE) | Numbers | 4.00 | 4,245 | 16,980 |
| 13 | Electronic earth tester Model No. 4680B Meco make or higher version or similar. The earth tester shall be non-contact type without requirement of auxiliary electrodes and shall have 4 digit 9999 LCD display with ground resistance range from 0.025 to 1500. (To Be Inspected by CONSIGNEE) | Numbers | 5.00 | 83,799 | 4,18,995 |
| 14 | Supply, installation and wiring of KLCR relay 24V DC Non-AC immunized with 4F/4B contacts. This also includes termination of cable and required wiring in KLCR box. (To Be Inspected by RDSO) | Numbers | 20.00 | 10,740 | 2,14,800 |
| 15 | "Supply of Q series Magnetically Latched (QL1) type Relay,24V DC, complete with plug board with connectors and retaining clips confirming to BRS 935A and RDSO specification IRS S:34 & IRS S:23 or latest. QL1- 11F/4B, The interlocking code: ABDEG" (To Be Inspected by RDSO) | Numbers | 30.00 | 5,701 | 1,71,030 |
| 16 | Supply of 24 V DC plug-in type miniature tractive armature, AC immune relay complete with plug board, retaining clip/ATC Clip and connectors as per IRS: S 23-88 Amd. 1 or latest, IRS: S 34-68 Amd. 6 or latest, IRS: S 60- 78 Amd. 1 or latest, IRS: S 67-85 Amd. 3 or latest (as applicable). QBCA1- 2HF/4B, Interlocking code: BCEJK a s per specifications BRS 943 or Latest (To Be Inspected by RDSO) | Numbers | 20.00 | 8,307 | 1,66,140 |
| 17 | "Supply of Transformer - Rectifier as per specification IRS: S 91-2014 Ver. 1.0 or latest. Transformer-rectifier set with 110V AC input, 24V-30V DC output, 1A." (To Be Inspected by RITES) | Numbers | 10.00 | 19,470 | 1,94,700 |
| 18 | Signal Route aspect with current regulator and health monitoring alarm unit with selection for use with conventional ECR or LED ECR to RDSO Specification No. RDSO/SPN/153/2023 rev.5.0 or Latest. (To Be Inspected by RDSO) | Numbers | 50.00 | 5,575 | 2,78,750 |
| 19 | Supply of Printer for maintenance terminal at station - HP LaserJet 1020 Plus or similar. (To Be Inspected by CONSIGNEE) | Numbers | 10.00 | 16,135 | 1,61,350 |
| Schedule total | ₹22,65,413 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
AdvanceCorrectionSlipNo_12_compressed.pdf correction slip 12
ATTACHMENT
TenderdocumentT.No.622.pdf
ATTACHMENT
MAKEININDIA2.pdf
ATTACHMENT
DRAWINGS.pdf
ATTACHMENT
Tele_Cir_9-2023.pdf
ATTACHMENT
corrslips1to11_compressed_1.pdf
ATTACHMENT
MAKEININDIA1_compressed1.pdf
ATTACHMENT
ListofAnnexures.pdf
ATTACHMENT
GCC_April-2022__1.pdf
ATTACHMENT
AdvanceCorrectionSlipNo_12_compressed.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .