Providing Water Supply Scheme Village Boparai Baz Singh -MH- Block Chogawan Distt Amritsar. UNDER JAL JEEVAN MISSION-PRWSSIP 2a-i

Amount

REPAIR OF PUMP CHAMBER

Conglomerate floor 50mm thick cement concrete 1:2:4 on 100mm thick cement concrete 1:8:16 with stone aggregate 40mm gauge and 100mm fine sand filling. sing mechanical mixer for mixing of material.

12.5mm thick cement plaster 1:4

12.5mm thick plaster in 1:4 under side of ceiling

Hollock wood doors shutter windows shutter including hinges, screws, chocks, cheats, stops cords etc. complete fixed in position. i) 40mm thick Door Windows

Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc.

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.

Applying priming coat with metal primer on new steel or iron work including preparation of surface. And Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.

Supplying Pressed steel sheet frames (chowkhat) consisting of 18gauge (1.25 mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality, fixed in position excluding the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete (a) Doors and Windows frame of Size 118mm×60mm with 40mm wide single rebate weighing 3.43 kg per meter.

Cement Cencrete 1:2:4 gola 10cm×10cm concave quardrant along junction of roof with parapet wall finished smooth where specially specified

White washing 3 coats inside of pump chamber.

Finishing walls with cement based water soluble exterior such as snowecem, robbiacem etc. on old work one coat to give an even shade. Quanity as per Sr. No. 17 Marked “C”

Distempering with dry distemper of approved manufacture one coat on old distempered work.

Supplying & fixing glass panes including special metal sash putty of approved make. Glass panes 4mm or 10.75 kg / sqm exceeding 0.4 sqm of area

Providing and fixing of ceiling fan of reputed make such as Crompton or equivalent

Providing and fixing of electric tube set of reputed make

Repair of OHSR

Providing & Fixing OHSR Top Jali complete in all respects

Repair of Expansion joints Complete in all respects (100 mm i/d)

Providing,Fixing and testing at site automatic electronic type water level indication system with gun metal float sensor and electrical cable suitable for three phase pump submersible/monoblock to be fixed on existing panel for OHSR complete in all respect.

Repair of Leakeage of Bottom Dome Complete in all respects

REPAIR OF WATER WORKS

Providing & fixing G.I. Barbed wire 3 ply fencing around the head works site in three rows complete in all respects including cost of winding wire & aluminum painting complete in all respects as per standard Drawing.

Providing & Fixing PCC Fencing Poles With 6' height, 3" x 3" Top & 4" x 3" Base provided with 3 nos. hooks complete in all respects

Construction of brick masonry corner pillar including cost of cement pointing including cost of material complete in all respects as per standard Drawing D-3.

Providing & fixing MS Sign Board as per standard size of DWSS as per Drawing D-20

Providing & fixing D.Hook complete with MS Bolts size 300mm x 18mm as per standard Drawing D-7.

Construction of masonry gate pillar including cost of MS Steel Gate size 1.22mtr x 1.37 mtr as per standard Drawing with including D-4 & Analysis A-4 complete in all respects

Construction of foot paths with masonry toe wall& earth filling & concrete topping; inside water works as per standard drawing D-10 & Analysis of Rates A-11 complete in all respects.

Providing & Installing Testing & Commissioning of One No. Electrically driven diaphragm opreated metering system chemical dosing chlorinator suitable for for delivering 0.5 to 6 liters of Bleaching Powder solution/ Sodium Hypo solution per hour under maximum delivery pressure upto 7 Kg/cm2 and suction left not less than 1.5 mtr., as per DWSS standard specifations.

Providing proposed water connections to household up to wall with providing ,laying, jointing, fixing, testing MDPE pipe line 15 mm i/d = (Below GL) and ISI Marked G.I. Pipe 15 mm i/d (As per IS 1239) B-Class approved make = (Above GL) including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground and ISI marked 15 mm i/d GM Ferrule as per IS:2692 and 3" i/d clamp with CI Bib Cock 15 mm i/d as per IS:210 with stainless steel spindle of approved make as per CSR 30.65(b) complete in all respects. (Connection at Existing pipe line)=140 Nos (Connection at New pipe line)=49 Nos

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. (6kgf/cm2) (excavation & including specials)

PVC pipe 90mm o/d

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in – charge) 80mm I/d

Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department Size 0.6m x 0.6m

Dismantling brick or flagged stone flooring without concrete base and relaying of dry brick on edge paving with a dismantled bricks including sand grouting.

Dismantling and restoration of Cement Concrete Flooring comlete in all respects.

Dismantling of inter locking tiles and re fixing it in in original condition

Carriage Cost of Fine Aggregate

Carriage Cost of Course Aggregate

CONDITIONS :-

Item for which no rate or price has been entered in will not be paid for the Employer when execut6ed and shall be deemed covered by the other rates and prices in the Bill of Quantities.

Unit rates and prices shall be quated by the bidder in indian ruppees.

Where there is a discrepancy between the rate in figures and words, the rates in words will govern.

Where there is a discrepancy between the rate and the line total resulting from muluplying the unit rate by quantity the unit rate quoted shall govern.

Any item of work not included in the above contract schedule of rates and got done at the site of work; the same will be paid according to CSR-2010 subject to the premium or discount tendered by the contractor. In the case of non-schedule items, the decision of the Engineer-in-charge will be final and binding upon the contractor. In case any item which is a part of lump-sum rate is be deducted @CSR rates + Ceiling premium prevailing on the date of tender

The work will be carried out in accordance with PWD Book of specifications - 1963 edition with upto date amendments.

Approximate quantities are given in the contract schedule of rates and these can vary at the time of execution of the work. The payment will be made according to the actual work done by the contractor.

All amendments issued on the common schedule of rates 2010. up to the date of opening of tenders will be applicable on the contract schedule of rates.

Contractor should clearly quote his rates in figures & words. Conditional tender will be rejected.

All items and rates provided in the DNIT are subject to the footnotes give in CSR-2010

The Engineer-in-charge will have full powers to change the layout of the work covered in this contract if considered necessary.

No claim will be entertained form the contractor in case, any mistake in description rates or unit occurs in any item taken in this schedule while preparing this DNIT or on account of typing or comparison or over writing. The same will be rectified at any time as per common schedule of rates 2010 along with upto date amendments.

The arrangements of bricks at site of work would be done by the contractor at his own level from his own source.

For any other non-schedule items, the contractor will submit through Engineer-in-charge, the analysis of rates in triplicate based on purchased vouchers. A margin of 10% shall be allowed for material components and 21.5% on labour components and contractor shall produce photo stat copies of the purchase vouchers in support of his claim. The decision of the Engineer-in-charge/Competent authority in the matter shall be final and binding on the contractor.

All the extra items will be got approved from the competent authority and no premium will be allowed on non schedule item

Pavement for the carriage of material shall be paid as per the rates quoted by the tenderer.

Time period allowed for completion of work in 3 months.

If contractor allowed for completion of work within 7 days from the date of allotment, DWSS reserve the right to impose penalty or withdraw the work and propose action for debarring in future tendering or both; decision of Chief Engineer (North) shall be binding.

Fortune Associates