COMPREHENSIVE REPAIR OF BLDGS OF ZONE A UNDER AOR OF AGE BR DETT B OF GE 862 EWS

Amount

S&F of Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws and making good to disturbed portion including dismantling of old sheet of any description complete all as specified and as directed.

S& F of Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws including dismantling of old sheet of any description all as specified and as directed.

Dismantling of structural steel work of any description, complete all as specified and directed.

S & F of steel work as in tubular trusses including special shaped washers etc. complete using ERW or induction butt welded tubes conforming to IS-1161(1979) grade ST-240, complete all as specified and directed.

M&L for 75mm thick cement concrete 1:4:8, type D-2 (using 40 mm graded stone graded stone aggregate) as in sub base for tiling, complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 450 x 350 x 7mm thick, (premium quality highlighter basis) on vertical surface of wall such as dado, skirting, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 10mm thick rendering in cement mortar 1:3, after & including dismantling old unserviceable of tiles, complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (premium quality) Square/rectangular, area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar 1:4, after & including dismantling old unserviceable of tiles, complete all as specified and as directed.

M&L for Vitrified tiles light grade 10 mm thick (square/rectangular) polished with highliter border of approved colour pattern, area of each tiles exceeding not exc 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, laid over and including 15 mm thick screed bed in cement mortar 1:4 after & including dismantling old unserviceable of tiles, complete all as specified and directed.

M&L for Vitrified Ceramic tiles double charged 10 mm thick of approved colour polished with highliter border, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, laid over and including 15 mm thick screed bed in cement mortar 1:4 after & including dismantling old unserviceable of tiles, complete all as specified and directed.

M&L for 18-20mm thick granite stone slab (of any type) work (table rubbed and polished) in cooking platforms, in steps, pillars, window cills, etc, laid over 15mm thick bedding in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite slab, rounding edges etc after & including dismantling of old unserviceable granite stone slab of any size, complete all as specified and directed.

M&L for 18-20mm thick marble (table rubbed and polished) of any colour in flooring, cooking platforms, in steps, pillars, window cills, etc, laid over 15mm thick bedding in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite slab, rounding edges etc after & including dismantling of old unserviceable marble slab of any size, complete all as specified and directed.

M&L for Machine cut kota stone slab(mirror polished) flooring 18-20mm thick as in floors and jointed with grey cement slurry mixed with pigment to match the shade of the slab including machine cutting to make it square or rectangular, rubbing and cutting and polishing to achieve mirror finish, laid over and including screed bed or bedding layer of 15 mm thick in cement mortar 1:4 of any size after & including dismantling old unserviceable of kota stone, complete all as specified and directed.

M&L for Machine cut kota stone slab(mirror polished) 18-20mm thick as in skirting and jointed with grey cement slurry mixed with pigment to match the shade of the slab including machine cutting to make it square or rectangular, rubbing and cutting and polishing to achieve mirror finish, laid over and including rendering of 20 mm thick in cement mortar 1:4, after & including dismantling old unserviceable of skirting, complete all as specified and directed.

M & L Digital vetrified exterior parking tile 300 x300 mm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to matched laid over and including 15 mm thick screed bed in cement mortar 1:4 after & including dismantling old unserviceable of tiles, complete all as specified and directed.

Demolition of brick work or stone / boulder or concrete block masonry including all quoins, arches, pillars, etc. built in cement mortar complete all as specified.

M & L for brick work with sub class ‘B’ old size bricks straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M & L for brick work with sub class ‘B’ old size bricks, straight or curved on plan and any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.

Description all as per srl item No. 16 here-in-before but except bricks. Note: Bricks retrieved from item No 15 will be re-used.

M&L for walling of random rubble, uncoursed, well bounded, bedded and solidly hearted built in cement mortar 1:6 complete all as specified and directed.

Description all as per srl item No. 19 here-in-before but except stone. Note: Stone retrieved from item No 15 will be re-used.

Extra over stone walling for hammer dressing to face stone and dressing of face beds with maximum depression on face from straight edge held against the dressed surface on sand stone n.exc 20mm, complete all as specified and directed.

Taking down cement plaster on brick or stone wall surface etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for Rendering 15 mm thick on fair faces of brick work or concrete surface in CM (1:6), finished surface even and smooth without using extra cement and including chiken wire mesh shall be used as per the site requirement and directed by the Engr-in-Charge to prevent cracks and complete all as specified and directed. Note:- Cost of chiken wire mesh will be included in the quoted rate.

M&L for Rendering 15 mm thick on fair faces of brick work or concrete surface in two layers (5mm thick CM 1:4 over 10mm thick CM 1:6 ) on external brick work or concrete surfaces , finished even and smooth without using extra cement including mixing with liquid WPC as per manufacturer's instructions and chiken mesh shall be used as per the site requirement and directed by the Engr-in-Charge ,complete all as specified and as directed. Note :- (i) Cost of chiken mesh & WPC will be included in the quoted rate. (ii) Buildings height not exceeding four storey and rate shall be included for necessary scaffolding and safety measures where required at site.

M & L for rendering 10mm thick in cement mortar (1:3) on soffits of slabs, chajja etc finished even and fair without using extra cement complete all as specified and directed.

M&L for rendering 20 mm thick on stone walls other than fair faces in CM (1:6), finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered wall surface including cornices etc and applying two coats of Premium acrylic Alkali, fungal & dirt resistance exterior emulsion all weather proof paint of Apex Ultima of ASIAN or equivalent make of any approved in single/two or more colour pattern as specifed by Engr-in-Charge over and including a coat of primer all as directed and as approved. Note :- Buildings height not exceeding four storey and rate shall be included for necessary scaffolding and safety measures where required at site).

M & L for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion over one coat of chalk whitening, complete all as specified and directed. Note :- As per the site requirement and directions of Engr-in-Charge, 3mm thick putty shall be applied on new plastered wall surfaces and it will be measured and paid separately under respective item.

M & L for preparation of new plastered surfaces of walls and applying two coats of emulsion plastic paint ready mixed colour by machine to achieve the required colour over one coat of approved priming coat, complete all as specified and directed . Note :- As per the site requirement and directions of Engr-in-Charge, 3mm thick putty shall be applied on new plastered wall surfaces and it will be measured and paid separately under respective item.

M & L for preparation of new plastered surfaces of ceiling and applying two coats of distemper oil emulsion over one coat of chalk whitening complete all as specified and directed. Note :- As per the site requirement and directions of Engr-in-Charge, 3mm thick putty shall be applied on new plastered wall surfaces and it will be measured and paid separately under respective item.

M&L for applying 3mm thick wall care putty in two layers on walls/ ceilings to obtain a smooth surface including surface preparation and making good any undulations on the surfaces complete all as specified and directed.

Taking down chowkat or frame with shutter (without taking off shutter from the frame) exceeding 1.5 but not exceeding 4.0 sqm each complete all as specified and directed.

Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down shutters of any description exceeding 1.0 but not exceeding 2.0 sqm each complete all as specified and directed.

S & F of 1.25 mm thick pressed steel frame of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates and holdfast including PCC 1:3:6 type C-0 using 12.5mm graded stone aggregate for back filling of frame etc, complete all as specified and directed.

S & F of 1.25 mm thick pressed steel frame of size 105 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates and holdfast including PCC 1:3:6 type C-0 using 12.5mm graded stone aggregate for back filling of frame etc, complete all as specified and directed.

M&L for 2nd class hard wood well seasoned plain solid straight chowkhat framed wrought framed, rebated on the solid, round or chamfered put together with glue and pinned at joint and fixed in wall complete all as specified and directed

S & F for 35mm thick 2nd plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified.

S & F of 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares, with out sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and size of the members of shutter is as specified in clause No. 8.24 (a) of MES schedule 2009, part – I (Specifications) including MS 300mm size ordinary rat tail rod pattern door spring, complete all as specified.

M&L for factory made 100% solid WPC door frame 125mm x 65mm single rebated made from wood polymer composite (single extruded process) material comparising of vigin PVC polymer of K value 57-60 (suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives fabricated with meter joints after applying PVC solvent cement & screwed with full body treated star headed screws having minimum frame density of 780 kg/cbm & manufactured by "RAJSHRI" an certified by ISO 9001-2015, having good screw holding capacity (screw withdrawel strength of min 990N), min compressive strength of 58N/Sqmm, modulus of elasticity 900 N/Sqmm and resistance to spread of flame of class A category with property of being termite /borer proof, water /moisture proof & fire retardant & fixed in position with SS dash fastener / hold fast of required dia and length, all as per specification, drawing and as directed. Note: Material test certificate and authentication should be compusory provided by the manufacturing company, complete all as specified and directed.

M&L for factory made of 30mm thick 100% solid WPC laminated moduled door shutter comparising of vigin PVC resin of K value 57-60 (suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives made from extrusion process WPC foam sheet single extrauded (inner) with having minimum frame density not less than 650 kg/cbm & manufactured by "RAJSHRI" an certified by ISO 9001-2015, having good screw holding capacity (screw withdrawel strength of min 2000N) (Face) & 1100 N (Edge), min compressive strength of 50N/Sqmm, modulus of elasticity 850 N/Sqmm and resistance to spread of flame of class A category with property of being termite /borer proof, water /moisture proof & fire retardant. WPC to be laminated with PVC foil of minimum 1 micron thick of approved design pasted on both faces of shutter and fixing stainless steel butt hings of required size with necessary full body threaded star headed counter sunk SS screwes, all as per specification, drawing and as directed . Note: Material test certificate and authentication should be compusory provided by the manufacturing company, complete all as specified and directed.

S & F of box type steel window with side hung shutters including box type hinges with steel handle, hold fast and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S & F of box type steel window with side hung shutters including box type hinges with steel handle, hold fast and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel ventilators with top hung shutters including hinges and handle with steel peg stay complete welded, complete all as specified and directed.

M & L for figured glass, pin head type, 3mm thick and glazing with oil putty in squares n.exc. 0.5 sqm each pane complete all as specified and directed.

S&F for powder coated (thickness of powder coating not less than 50 micron) anodised aluminium door shutters, windows & ventilators minimum thickness 2mm of aluminium sectoin including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM /neoprene gasket required (fittings shall be paid for separately) with extruded built up standart tubular section /appropriate Z-sections and other sections of approved make conforming to IS 733 and IS 1285, fixing with dash fasteners of required dia and size including necessary filling up the gaps at junctions, i.e. at top bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, CP brass/ stainless steel screws all complete as per architectural drawings, complete all as specified and directed.

S&F for powder coating of any colour (Thickness or powder coating not less than 50 micron) aluminium door shutters of section weighing not less than 0.55 Kg/M including 5mm thick plain/coloured/frosted sheet glass, ACP sheet and stainless steel wiremesh and conneced items such as necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws, pegstays 150mm long, hinges tyoe B-21, 100mm long suitable handle, tower bolts, mortice lock and door stopper and other accessories as per site requirement complete all as specified and directed.

S & F for powder coating of any colour (Thickness or powder coating not less than 50 micron) aluminium fixed or openable shutter side hung type without sash bar for windows and ventilator with one or more openable or fixed, aluminium sections weighing 0.55 Kg/M including 5mm thick plain/coloured/frosted sheet glass and stainless steel wiremesh and conneced items such as peg necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws, pegstays 150mm long, hinges tyoe B-21, 100mm long, suitable handle, tower bolts, mortice lock and door stopper and other accessories as per site requirement complete all as specified and directed.

S&F powder coated aluminum anodized fixed partition with frame (Thickness or powder coating not less than 50 micron) of size 63mm x 38.1mm x 1.20mm thick with total height 3.20m. The panels shall be made out of 5mm thick plain /coloured/tinted(frosted) sheet glass, ACP sheet and stainless steel wiremesh and connected items such as necessary jointing cleats, glazing clips , rubber packing, aluminum snap beading screw etc including making good to the disturbed portion and dismantlling of old complete all as specified and directed.

S&F in repair Aluminium anodized grills 6.3mm dia decorative type 75mm mesh size complete all as per specified and directed.

S&F for powder coating of any colour (Thickness or powder coating not less than 50 micron) aluminum three track sliding window with window frame (chowkat) of 101.6mmx44.45mmx1.5mm and shutter styles of 40mm x20 mm, with two shutters of 5mm thick plain/coloured/frosted sheet glass, one shutter of stainless steel mosquito proofing with good quality bearing with aluminium beads locking arrangement with each shutter complete frame and rubber beading and glazing clips and all other accessories complete as specified and directed.

S&F factory made uPVC white colour sliding window three track made of extreded profiles with wall thickness of 2.3mm + 0.2mm. Window profile with hollow section with multi chember. Frame (112mm x 52mm), sliding sash (42mm + 67mm), sliding mesh sash (42mm + 57mm), sliding interlock (one vertical length in each shutters) (45.50mm x 28mm). Glazing bead (24.50mm*16mm) will be mitred cut and fusion welded at all corners including railing of holes for fixing hardware and drainage of water of etc. Making arrangement for fixing of hardware EPDM gascade1.2+ 0.2mm thick galvanized steel frame (30mm x 18mm) 2 Nos, sliding sash (30mm*18mm), sliding mesh sash (26mm x 10mm) profile to inserted in required profile, frame will be fixed to wall with 8mm x 100mm long fastners. Hardware (touch lock of zink alloyed (white powder coated), steel roller system, 5mm thick plain/ coloured/frosted sheet glass, stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperature 1.40mm and required accessories). to be provided with proper operative and locking hardware mechanism, frame to be fixed to wall with high quality fasteners and silicon glue is to be applied to fill up gap between frame and wall to make leak prof of any area complete, all as specified and as per manufacturer instructions. Note: The unit rate quoted by contractor includes cost of glass, SS wire mesh necessary connected accessories. Net opening will be measured for payment purpose.

S & F of mild steel framed work such as grills, gratings etc. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe-290 Grade E-165 including dismantling old one complete all as specified and directed.

S & F Stainless steel wire cloth., 0.71 mm nominal dia of size of mesh 12 mm and fixed with tinned tacks, or stainless steel wire staples, complete all as specified and directed.

S & F in repair Stainless steel wire cloth., 0.71 mm nominal dia ofsize of mesh 12 mm and fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed.

Hacking out old broken glass (any thickness size, quality or description from wooden or steel frames glazed with putty/beads complete all as specified and directed.

S & F of 4 mm thick Sheet glass, ordinary quality and glazing with oil putty/wooden beads in square in any size complete all as specified and directed.

M & L for providing plain cement concrete 1:2:4, type B-1, (using 20 mm graded stone aggregate) for embedding hold fasts and coping as directed including necessary form work as required complete all as specified and directed.

S & F of 100 mm long mild steel butt hinges, medium weight cold rolled (ISI marked), complete all as specified and directed.

S & F of 150 mm long aluminium anodised barrel tower bolt of extruded section (ISI marked), complete all as specified and directed.

S & F of 125 mm long extruded anodised aluminium alloy handle, fabricated type (ISI marked), complete all as specified and directed.

S & F of 300 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy (ISI marked), complete all as specified and directed.

S & F in repair aluminium extruded section door closer hydraulically operated designation No-03, universal type, suitable for door shutters of 851 to 1000mm width and of weight of 61 to 80 Kg (ISI marked), complete all as specified and directed.

S & F in repair 140mm long floor door stopper of brass body and tongue with hard drawn steel spring complete all as specified and directed.

M & L in repair for double action heavy duty floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass and other parts made of mild steel (ISI marked), complete all as specified and directed.

S & F in repair for brass mortice lock vertical type 100 mm long with 4 levers (ISI marked), complete all as specified and directed.

M & L for preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M & L for preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M& L for solid PVC wall lining consisting of 5mm thick plain or wood grain printed colour PVC sheet inclusive of solvent cement including 5mm thick PVC sheet fillet of width 35mm fixing on walls/ceiling to make PVC frame per standard specifications including dismantling of old wall paneling complete all as specified and directed.

S & F in repairs for sink without draining board made out of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm and bowl size 410mmx330mmx160mm complete all as specified and directed.

S&F in repairs assembled ready to use rectangular stainless steel (Grade 304) kitchen plate rack with 3-4 shelves, enclosed four sides by SS plain sheet, 0.6mm square support pipes, dedicated holes for spoon, pegs etc over all size 600mmx750mmx250mm of standard pattern and approved make complete all as specified and directed.

S&F for rotational moulded polythylene water storage tank (ISI marked) with float valve, plastic lid cover, multy-layered, cylindrical vertical with closed top, hoisted and fixed in position of capacity 500 ltrs tank and making connections inlcuding suitable GI wash out, over flow, nipple, union etc and fixed after dismantling of old unserviceable tank, complete all as specifed and directed.

S&F for rotational moulded polythylene water storage tank (ISI marked) with float valve, plastic lid cover, multy-layered, cylindrical vertical with closed top, hoisted and fixed in position of capacity 1000 ltrs tank and making connections inlcuding suitable GI wash out, over flow, nipple, union etc and fixed after dismantling of old unserviceable tank, complete all as specifed and directed.

M & L in repairs for 15 mm dia fancy type, chromium plated angle valves, cast copper alloy screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specifed and directed.

S&F in repair PVC waste pipe 600/900mm long suitable for Wash hand basins and urinals including connecting complete all as specifed and directed.

S & F in repair for 32mm dia waste coupling, brass, chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed complete all as specified and directed.

S & F in repairs brass chromium plated tubular towel rail 20mm dia 600mm long with and including one pair of brass chromium plated bracket complete all as specifed and directed.

S & F in repairs for 125mm dia PTMT grating doom with waste hole for waste pipe ( minimum weight 40 gram) complete all as specified and directed.

S & F in repair for PVC connection pipe 15mm dia with PTMT nuts of length 450mm complete all as specifed and directed.

S & F in repairs for 450mm long CP brass connection pipe with CP brass nuts on both ends for fixing to pipe or other fittings complete all as specifed and directed.

S &F in repairs for 15 mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass errule and fixed complete all as specifed and directed.

S &F in repairs for 20 mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass errule and fixed complete all as specifed and directed.

S&F in repairs vitreous china squatting pan, orissa pattern size 680 x 470 mm white/colour with integral foot rest (excluding flushing cistern and flush pipe) including provison of lime concrete including connection to flushing cistern complete all as specifed and directed.

S&F in repair for vitreous china wash down water closet pan, white (pedestal pattern), including plastic water closet seat, black/white, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device, excluding fixing bolts, flushing cistern and flush pipe) complete all as specifed and directed.

S&F in repair for vitreous China water closet pedestal pattern in one piece type of dimention 73cmX36cm74cm including seat cover and gaset, floor mounted, 'P' or 'S' trap, flushing kit, CP jet with PVC pipe of superior quality and all necessary fixing arrangements, complete all as specified and as directed.

S&F in repair copper alloy chromium plated jet spray suitable for padestal pattern WCs including decorative choice flexible pipe fixed to iron pipe with and including cover plate complete all as specified and as directed.

S&F in repair for 10 ltrs capacity (PVC), valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed.

Supply and fixing in repairs viterous China wash basin, white flat back, size 550x400mm excluding taps, waste chain and plug and porcelan stopper but including brackets complete all as specified and directed.

Supply and fixing in repairs viterous China wash basin with pedastal, white flat back, size 550x400mm excluding taps, waste chain and plug and porcelan stopper but including brackets complete all as specified and directed.

S & F in repairs for 15 mm bore automatic touchless (sensor) brass CP wash hand basin mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S & F in repairs for 15 mm bore brass CP wash hand basin mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S & F in repair for 15 mm bore brass CP sink mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S & F in repair wall mixer 3 in 1 with arrangement to overhead shower with connection legs wall flanges and wall bracket complete all as specified and directed.

S&F in repair for 15mm dia pillar taps, cast copper alloy, with capstan heads, brass chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed.

S&F in repair 15 mm dia bib tap cast copper alloy, chromium plated ,'with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repair under counter wash basin ovel size 600x425x195mm complete as specified and directed.

S & F in repair counter top wash basin size 545 x 545 x 180 mm complete all as specified and directed.

S & F in repair Glass corner shelf with tempered glass,stainless steel brackets and polished chrome finish rail complete all as specified and directed.

S & F in repair toilet paper roll holder with flap complete as specified and directed.

S & F in repair for 15mm bore brass chromium plated wall mixer with connection to the over head shower arrangement complete all as specified and directed.

S & F in repair Glass Shelf 600mm long complete as specified and directed.

S & F in repair brass CP Towel Ring complete as specified and directed.

S & F in repair CP Health faucet with 1.2 meter long stainless steel hose and wall hook complete all as specified and directed.

S&F in repair 15 mm dia two way bib tap cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repairs for PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors 110 mm bore complete all as specified and directed.

S & F in repairs PVC (SWR) bends of any radius of 110mm dia complete all as specified and directed.

S & F in repairs for PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors 75 mm bore complete all as specified and directed.

S & F in repairs PVC (SWR) bends of any radius of 75mm dia complete all as specified and directed.

M & L for 75 mm dia cast iron floor trap, with grating including jointing to waste pipe, complete all as specified and directed.

M&L for 4mm thick designer ceiling board in ceiling fixed with screw as per manufacturers instructions , laid over and including hot dipped galvanised iron in post grid with 24mm wide T section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33 mm thick galvanised steel sheet of size 24 x 32 x 300 mm spaced at 1200 mm centres securely fixed to the structural soffits by approved hangers at 1200mm maximum centres. Hangers of GI wire 4 mm dia to be fixed by approved rawl plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450 mm from adjacent wall flush fittings of 1200 mm long screws Tee with (double stiching) to interlocked between main runners at 600 mm centre to centre from 1200 x 600 mm modules cross tee longer than 600 mm modules to be formed by fittings 600 mm long cross tee, tee perimeter wall angle shall be of 0.45 mm thick galvanised steel of size 19 x 19 mm and 300 mm long of white colour all as per insturctions including dismantling of existing board with cover fillets etc complete all as specified and directed.

Providing and fixing 12 mm Gypsum Board sheets fixed to GI/ MS Channel section with fixing screws adhering to ceiling at same level with all required framimg and accessories. All joints shall be sealed as per manufracturer instruction and finished with wall care putty and two coats of smooth surface oil bound distemper of approved and shade including dismantling of existing board with cover fillets etc complete all as specified and directed.

Demolition of reinforced cement concrete in any description in ground floor and paving not exc 15cm thick complete all as specified and as directed.

M & L for TMT bars 8 mm dia and over, cut to length, bent to shape required, incvluding cranking, binding spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L for use and waste of form work to soffits of flat suspended slabs such as roof slabs, floor slabs,chajjas, landings and similar work not exc. 200 mm thick horizontal or slopping in rough finished surface of concrete complete all as specified and directed.

M & L for providing reinforced cement concrete 1:2:4 (Nominal Mix) type B-1, using 20 mm graded stone aggregate, as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, chajjas, shelves and the like complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M & L for 40 mm thick plain cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in floors, finishing cement concrete surface even and smooth using extra cement complete all as specified and directed.

M & L for 75 mm thick cement concrete 1:3:6 type C-2, using 40 mm graded stone aggregate as in plinth protection laid to slop of 1:12, finished surface even and fair without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 6 mm wide joints through out the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description having width/girth exceeding 10 cm and apply one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description having exceeding 10 cm width/girth and apply one coat of synthetic enamel paint complete all as specified and directed.

M & L for preparation of old plastered wall surfaces and applying one coat of distemper oil emulsion, complete all as specified and directed.

M & L for preparation of old plastered ceiling surfaces and applying one coat of distemper oil emulsion, complete all as specified and directed.

M & L for complete removal of existing treatment on walls and ceiling and applying one coat of plastic emulsion paint over one coat of approved primer on old plastered surfaces including preparation of surfaces complete all as specified and directed. Note :- As per site requirement 3mm thick putty shall be applied to make surfaces plain and it will be measured and paid separately under respective item.

M&L for complete removal of existing treatment on wall/roof surface including cornices and chajjas etc and applying one coat of exterior emulsion weather coat paint Apex Ultima of ASIAN or equivalent make of any approved single/two or more colour pattern (as approved by Engr-in-Charge) over and including a coat of primer all as directed and as approved. Note :- Buildings height not exceeding four storey and rate shall be included for necessary scaffolding and safety measures where required at site).

S & F in repair toughned glass 12 mm thick as in hinged doors, partitions automatic doors and similar work with all stainless steel accessories as per site requiremnet including cutting to shape, drilling holes as required, complete all as specified and directed.

S&F in repairs gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 15 mm dia complete all as specified and directed.

S&F in repairs gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 20 mm dia complete all as specified and directed.

M&L for 15 mm bore galvanized iron GI tubing medium grade with all fittings such as bends, socket, tee, elbow, union, nipple, short pieces and fixed to walls, ceilings or laid in floors including taking down existing GI tubes complete all as specifed and directed.

M&L for 20 mm bore galvanized iron GI tubing medium grade with all fittings such as bends, socket, tee, elbow, union, nipple, short pieces and fixed to walls, ceilings or laid in floors including taking down existing GI tubes complete all as specifed and directed.

S&F in repairs vitreous china urinals,flat back of size 465mmX355mmX265mm,white, bowl type, complete including providing and fixing plus, bedding urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe with grating and union for discharge pipe including connecting to waste pipe complete all as specified and directed.

S&F in repair fancy type curtain rod powder coated 20mm dia (of approved colour and design) complete all as specified and directed.

S&F in repair for brackets with finials of fancy type (of approved colour and design) for curtain rod powder coated 20mm dia including fixing to walls with MS full screws including fixing of wooden pieces of required size to walls complete all as specified and directed.

S & F in repairs stainless steel curtain rod of 20mm dia complete as specified and directed.

S & F stainless steel 'T' and 'L' type brackets with finials complete as specified and directed.

M & L in repair door bottom sealing strip guard with double sided insulation for doors, which are equally able to keep wind, dust and sound or poluted air out side of door (i.e. Anti Lizard strip) fixed to aluminium or pannel door complete all as specified and directed

M & L for scrapping out of existing surface of wooden door, window, partition etc filling with putty and levelling the existing surface and applying two coat of matt finish polish of any colour as directed and approved.

Complete removal of existing waterproofing treatment over RCC roof till top of roof slab of any thickness, any type by striping out old tar felt over roof, parapet, chimney stacks etc laid horizontally or vertically including demolition of old PCC and a layer of cement plaster etc including cleaning the surface with wire brush and removing the debris from the site and depositing in low laying area where directed and providing the following:- (a) Rendering 10mm thick in CM 1:3 over on concrete roof surfaces and finish the surface even and smooth without using extra cement incl mixing water proofing compound @2% by weight of cement. (b) Apply a coat of bituminous primer confirming to IS-3384@ 0.4 ltr/ Sqm on newly plastered surface after curing as per IS-456 and dried. (c) After the primed surface has dired, apply a coat of hot blown bitumen (85/25 penetration) confirming to IS-702 @ 1.2 Kg/Sqn of the surface. (d) Provide polymeric water proofing membrane ISI marked laid with overlaps, bonded with hot blown bitumen, and laid by torch application method, end overlaps shall not be less than 150mm and side lap 75mm. Polymeric water proofing membrane should be five layered with centre core as 90 micron high molecular high density polyethelene film, min weight 3 Kg per sqm & minimum 3mm thick reincormed with polyster non wove fabric, APP membrane shall laid across the slop from lowest line of sloping roof towards ridge. (e) Over the APP membrane, apply a coat of semi hot blown 85/25 penetration grade bitumen confirming to IS-702 @ 1.20 Kg/Sqm and blinded with fine sand in dry conditioni @ 0.50 Kg/Sqm dusted over the bitumen coat. Note:- (i) Care shall be taken to avoid wrinkle and air gaps while sticking membrane to the bitumen applied surface. (ii) Ponding test shall be conducted for 72 hrs as directed. Items and same shall be returned to contractor on satisfactory completion of guarantee period of 5 years. (iii) Rate of WPC will be included in the quoted rate. (iv) Special steel supports to be provided at certain places while dismantling the top layer as directed and specified by Engr - in - Charge.

S&F in repair for CP soap dish holder with chromium plated brass screws complete all as specified and directed.

S&F in repair for soap dispenser with glass bottle complete all as specified and directed.

S&F in repair for CP brass shower rose of size 125 mm with swivel joints fixing to steel pipes etc. Complete as all as specified and directed.

S&F in repair for telephonic bath shower with all connecting accessories complete all as specified and directed.

S & F in repairs bathroom cabinet of hard thermosetting plastic of size 600x450mm, fitted with superior quality distortion free 4mm thick mirror complete as specified and directed.

M&L in repair 19 mm thick plywood, grade BWR, type BB, fixed with screws to timber frame work for kichen cabinet or cupboard complete as specified and directed.

s & F in repair high glossy outer sunmica of any colour/design 1mm thick on wooden surfaces with synthetic resin adhesive (Fevicol) complete all as specified and directed.

S&F in repairs 30mm width of flaps continuous (Piano) hinges, mild steel, bright finish or electrogalvanized complete as specified and directed.

S&F in repairs concealed type Stop valves, 15 mm bore of pipe, cast copper alloy CP, screwed down, high pre-ssure, with long shank and cup, screwed both ends for iron pipe or for unions and fixed complete as specified and directed .

S&F in repairs plastic sheet covers for water closet, white/black, closed pattern with flat bottom with mild steel chromium plated or alluminium hinging device, screws, bolts etc complete as specified and directed.

S & F in repair of 100 mm long mild steel butt hinges, medium weight cold rolled complete all as specified and directed.

S & F in repair of 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S & F in repair of 150 mm long extruded anodised aluminium alloy handle, fabricated type complete all as specified and directed.

S & F in repair of 300 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy complete all as specified and directed.

S & F in repiar of 300mm, mild steel rat tail rod pattern springs including roller and roller plate complete as specified and directed

M&L for providing and fixing stainless steel (Grade 316) gate,railing made of hollow tubes, channels, plates, solid bars, SS chain etc. including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement including dismantling old iron/steel members complete as specified and directed Note:- (i) Design and size of all members shall be approved by GE

M&L for 12 mm thick prelaminated particle board, interior grade both side decorative choice lamination fixed to aluminium doors or similar works including takingdown of old board complete all as specfied and as directed.

KANWAL KUMAR GUPTA (BID ID -3333847)

M/S BADRI NATH GUPTA (BID ID -3326574)