1)Khamgaon - Construction of Boundary wall at Khamgaon Station on UP and DN road (1380 m). Project id: 01.01.64.25.3.50.003 2)Nandura - Construction of Boundary wall at Nandura Station on UP and DN road (2060 m). Project id: 01.01.64.25.3.50.004 3)Shegaon - Construction of Boundary wall at Shegaon Station on UP and DN road (1740 m). Project id: 01.01.64.25.3.50.005 4)Biswa Bridge Station - Construction of Boundary wall at Biswa Bridge Station on UP and DN road (1340 m). Project id: 01.01.64.25.3.50.006

and DN road (1340 m)

Item- 1 NS items

S No. Item Description of Item Unit Qty Rate Amount

1 NS-3 Providing & laying in position 7mm Dia HTS Kg 4250.00 137.00 582250.00

Indented wires with UTS of 1470 MPa confirming

to IS-6003 for manufacturing of PSC element by

using mechanical pulling arrangement like

Rabbit/ Bed master including all accessories for

stressing & destressing operations as per

approved make etc, complete as per drawings

and direction of Engineer - incharge. Note: The

rate is inclusive of all contractors labour,

materials including, cutting, pulling arrangement,

machineries, tools & plants, taxes etc. complete.

Payment will not be made for any wastages .

2 NS-5 "Providing & grouting of PSC Column with RCC Numbers 474.00 709.00 336066.00

Foundation as per approved drawing with M- 60

grade cementitious grout (Non Shrink) of

approved make by suitable means (Free

flowing/pump), curing etc. complete as per

directions of Engineer-in- charge. Note: The rate

is inclusive of all contractors labour, tools &

plants, all materials including approved quality of

non- shrink cementious grout og M60 grade,

aggregates, all machineries, placing in position,

etc. Complete in all respect. Payment will not be

made for any wastages."

BHUSAWAL DIVN-ENGINEERING/CENTRAL RLY

3 NS-1A "Fabrication, Manufacturing & Transportation of Each 1419.00 1293.00 1834767.00

Precast Prestressed Concrete elements of M45

grade design mix concrete (i) Fabrication &

manufacturing of Prestressed Concrete (Pre-

tensioned) elements such as panel, column etc.

as per approved drawing in Controlled Factory

Environment with approved methodology by

using long line casting met hod. Concreting

should be done by batch mixing plant with

capable of producing zero slump concrete,

transported through mechnical arrangement &

layed on the bed, finishing, curing and also

provision of steam curing. Cutting, making

necessary cutout/holes of required sizes for

services in PSC element after achieving required

strength, yard handling & stacking all complete

as per approved shop drawings & design mix as

per the direction of the En gineer-in-charge .

(Cost of HTS wires shall be paid separately under

relevant item). (ii) Transportation of Precast PSC

Elements from casting yard to site of work by

suitable Truck/Trailor with proper accessories,

including the cost of loading, unloading &

stacking at site with the help of required capacity

cranes . (iii) The rate is inclusive of all

ingredients i.e. cement, sand, aggregate,

admixtures, water etc. including handling,

batching, mixing, transporting, placing and

vibrating of concrete, curing, scaffolding,

shuttering, formwork, mould, staging, lifting

arrangement as per approved drawing etc. with

all lead and lift with contractor's own labour,

tools & plants machineries all taxes etc complete

as required for successful completion of the item.

Note-1: No payment shall be made for damaged

Precast elements Note-2: 70% payment shall be

made when PSC elements reach to site and

balance 30% payment shall be made after

erection & placement in position. Note-3: Incase

of change of size of precast PSC element,

payment shall be adjusted on volumetric pro-rata

basis. a) PSC Panel of Size 2330mm X 600mm X

80mm as per Approved Type Plan"

4 NS 4/c Erection & Installation of Precast PSC/RCC Each 474.00 832.00 394368.00

elements in correct & final position with proper

line, level and plumb at site making all

arrangements (i.e cranes, push-pull jacks & all

other T&P) for lifting, placing, Steel Props for

holding in position after Erection & Alignment of

elements, within erection tolerance as per

IS:15916 as per approved shop drawings and all

complete as per the direction of Engineer

grouting shall be paid separately). Note-1: The

rate is inclusive of all contractors labour,

materials including machineries, tools & plants,

etc. complete. Note-2: In case of change of size

of precast PSC element, payment shall be

adjusted on volumetric pro-rata basis. c) RCC

Foundation 1300mm X 800mm X 700mm as per

Approved Type Plan

BHUSAWAL DIVN-ENGINEERING/CENTRAL RLY

5 NS 4/a Erection & Installation of Precast PSC/RCC Each 1419.00 228.00 323532.00

elements in correct & final position with proper

line, level and plumb at site making all

arrangements (i.e cranes, push-pull jacks & all

other T&P) for lifting, placing, Steel Props for

holding in position after Erection & Alignment of

elements, within erection tolerance as per

IS:15916 as per approved shop drawings and all

complete as per the direction of Engineerin-

Charge. (Cost of grouting shall be paid

separately). Note-1: The rate is inclusive of all

contractors labour, materials including

machineries, tools & plants, etc. complete. Note-

2: In case of change of size of precast PSC

element, payment shall be adjusted on

volumetric pro-rata basis. a) PSC Panel of Size

2330mm X 600mm X 80mm as per Approved

6 NS 4/b Erection & Installation of Precast PSC/RCC Each 474.00 304.00 144096.00

elements in correct & final position with proper

line, level and plumb at site making all

arrangements (i.e cranes, push-pull jacks & all

other T&P) for lifting, placing, Steel Props for

holding in position after Erection & Alignment of

elements, within erection tolerance as per

IS:15916 as per approved shop drawings and all

complete as per the direction of Engineer in-

Charge. (Cost of grouting shall be paid

separately). Note-1: The rate is inclusive of all

contractors labour, materials including

machineries, tools & plants, etc. complete. Note-

2: In case of change 250mm as per Approved

Type Plan of size of precast PSC element,

payment shall be adjusted on volumetric pro-rata

basis. b) PSC Cloumn (H-Section) of size 2650mm

7 NS 4/d Erection & Installation of Precast PSC/RCC Each 474.00 19.00 9006.00

elements in correct & final position with proper

line, level and plumb at site making all

arrangements (i.e cranes, push-pull jacks & all

other T&P) for lifting, placing, Steel Props for

holding in position after Erection & Alignment of

elements, within erection tolerance as per

IS:15916 as per approved shop drawings and all

complete as per the direction of Engineer in-

Charge. (Cost of grouting shall be paid

separately). Note-1: The rate is inclusive of all

contractors labour, materials including

machineries, tools & plants, etc. complete. Note-

2: In case of change of size of precast PSC

element, payment shall be adjusted on

volumetric pro-rata basis. d) Column Cap 300mm

X 300mm X 150mm as per Approved Type Plan

BHUSAWAL DIVN-ENGINEERING/CENTRAL RLY

8 NS - "Fabrication, Manufacturing & Transportation of Each 474.00 1722.00 816228.00

1/b Precast Prestressed Concrete elements of M45

grade design mix concrete (i) Fabrication &

manufacturing of Prestressed Concrete (Pre-

tensioned) elements such as panel, column etc.

as per approved drawing in Controlled Factory

Environment with approved methodology by

using long line casting met hod. Concreting

should be done by batch mixing plant with

capable of producing zero slump concrete,

transported through mechnical arrangement &

layed on the bed, finishing, curing and also

provision of steam curing. Cutting, making

necessary cutout/holes of required sizes for

services in PSC element after achieving required

strength, yard handling & stacking all complete

as per approved shop drawings & design mix as

per the direction of the En gineer-in-charge .

(Cost of HTS wires shall be paid separately under

relevant item). (ii) Transportation of Precast PSC

Elements from casting yard to site of work by

suitable Truck/Trailor with proper accessories,

including the cost of loading, unloading &

stacking at site with the help of required capacity

cranes . (iii) The rate is inclusive of all

ingredients i.e. cement, sand, aggregate,

admixtures, water etc. including handling,

batching, mixing, transporting, placing and

vibrating of concrete, curing, scaffolding,

shuttering, formwork, mould, staging, lifting

arrangement as per approved drawing etc. with

all lead and lift with contractor's own labour,

tools & plants machineries all taxes etc complete

as required for successful completion of the item.

Note-1: No payment shall be made for damaged

Precast elements Note-2: 70% payment shall be

made when PSC elements reach to site and

balance 30% payment shall be made after

erection & placement in position. Note-3: Incase

of change of size of precast PSC element,

payment shall be adjusted on volumetric pro-rata

basis. b) PSC Column CH-Section) of size

2650mm X 250mm X 250mm with grooved as

per Approved Type Plan"

BHUSAWAL DIVN-ENGINEERING/CENTRAL RLY

9 NS - Fabrication, Manufacturing & Transportation of Each 474.00 4200.00 1990800.00

2/a Precast RCC elements of M30 grade design mix

concrete (i) Fabrication and manufacturing of

precast concrete element such as foundation &

column cap as per approved drawing,

manufactured in controlled factory environment

with approved methodology including moulds,

mixing, transporting and placing of concrete,

vibrating, curing, finishing, making necessary

cutout/holes of required sizes for services, yard

handling & stacking all complete as per

IS:11447:1985 and as per approved shop

drawings and design mix as per the direction of

Engineer in Charge (Cost of steel for

reinforcement shall be paid separately under

relevant item ) . (ii) Transportation of Precast

RCC Elements from casting yard to site of work

by suitable Truck/Trailor with proper accessories,

including the cost of loading, unloading &

stacking at site with the help of required capacity

cranes. ((iii) The rate is inclusive of all

ingredients i.e. cement, sand, aggregate,

admixtures, water etc. including handling,

batching, mixing, transporting, placing and

vibrating of concrete, curing, scaffolding,

shuttering, formwork, mould, staging etc. with all

lead and lift with contractor's own labour, tools &

plants machineries all taxes etc complete as

required for successful completion of the item.

Note-1: No payment shall be made for damaged

Precast elements. Note-2: 70% payment shall be

made when PSC elements reach to site and

balance 30% payment shall be made after

erection & placement in position . Note-3: Incase

of change of size of precast RCC element,

payment shall be adjusted on volumetric pro-rata

basis. a) RCC Foundation 1300mm X 800mm X

700mm as per Approved Type Plan

BHUSAWAL DIVN-ENGINEERING/CENTRAL RLY

10 NS - Fabrication, Manufacturing & Transportation of Each 474.00 97.00 45978.00

2/b Precast RCC elements of M30 grade design mix

concrete (i) Fabrication and manufacturing of

precast concrete element such as foundation &

column cap as per approved drawing,

manufactured in controlled factory environment

with approved methodology including moulds,

mixing, transporting and placing of concrete,

vibrating, curing, finishing, making necessary

cutout/holes of required sizes for services, yard

handling & stacking all complete as per

IS:11447:1985 and as per approved shop

drawings and design mix as per the direction of

EngineerinCharge (Cost of steel for

reinforcement shall be paid separately under

relevant item ) . (ii) Transportation of Precast

RCC Elements from casting yard to site of work

by suitable Truck/Trailor with proper accessories,

including the cost of loading, unloading &

stacking at site with the help of required capacity

cranes. ((iii) The rate is inclusive of all

ingredients i.e. cement, sand, aggregate,

admixtures, water etc. including handling,

batching, mixing, transporting, placing and

vibrating of concrete, curing, scaffolding,

shuttering, formwork, mould, staging etc. with all

lead and lift with contractor's own labour, tools &

plants machineries all taxes etc complete as

required for successful completion of the item.

Note-1: No payment shall be made for damaged

Precast elements. Note-2: 70% payment shall be

made when PSC elements reach to site and

balance 30% payment shall be made after

erection & placement in position . Note-3: Incase

of change of size of precast RCC element,

payment shall be adjusted on volumetric pro-rata

basis. b) Column Cap 300mm X 300mm X

150mm as per Approved Type Plan