DNIT for the work of providing canal Based Water Supply Scheme for Mehra Group of 6no. Village construction Canal Based Water Works at village Mehra District Charkhi Dadri

Amount

WATER TREATMENT PLANT (WTP) Design & construction of automated PLC with SCADA controlled water purification plant of 2.00 MLD capacity at Water Works Mehra including remote terminal units (RTU’s) for raw water Pumping station & IBS-1 Badal having synchronization with SCADA of Mehra water works, comprising of interconnecting DI pipe from raw water pump to inlet box of WTP & WTP to CWT & Suction Well for CW , inlet channel, Alum dozing, Flash mixing, Clari floculator, filter box, over head Reservoir for back wash including pump sets and electric control panel, waste water tank including pump sets and electric control panel, DI pipes, DI specials, manhole covers, air scour equipment, chemical house including chlorination equipment and arrangement of flow measurement and sand bed with automation complete in all respects as per NIT (Sluice valves of make IVC/VAG)

RAW WATER PUMPING MACHINERY Supply & Eraction of Horizontal spindle split casing type pumping sets of following duties directly coupled to AC squirrel cage induction type motor with accessories as described in Schedule No II complete in all respect with priming arrangement with complete base frame RAW WATER PUMPING STATION 3000 LPM X 35 M. Head

WATER WORKS MEHRA 1200 LPM X 12 M. Head

CLEAR WATER PUMPING MACHINERY Supply & Eraction of Horizontal spindle split casing type pumping sets of following duties directly coupled to AC squirrel cage induction type motor with accessories as described in Schedule No II complete in all respect with priming arrangement with complete base frame WATER WORKS MEHRA 700 LPM X 50 M. Head

600 LPM X 65 M. Head

800 LPM X 45 M. Head

IBS - 1 BADAL 600 LPM X 45 M. Head

800 LPM X 45 M. Head

V.B.S. (VILLAGE BOOSTING STATIONS) 400 LPM X 35 M. Head

800 LPM X 35 M. Head

PANEL BOARDS FOR MOTORS Supply, erection, testing & commissioning of wall mounted electrical L.T. Panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200 x 900 mm and 400 mm deep having following items For 2 no Pumping Sets of 3000 LPM x 35 m Head a) Main switch 200 amp. 2 No. (L&T Siemens, ABB) b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T) c) Digital Multi-function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 3000 LPM x 35 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 2 Nos. of approved make. g)Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) Ref. no. 2.1

For 2 no Pumping Sets of 1200 LPM x 12 m Head a) Main switch 100 Amp. 2 No. (L&T Siemens, ABB) b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 3000 LPM x 45 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 2 Nos. of approved make. g)Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) Ref. no. 2.2

For 2 no Pumping Sets of 700 LPM x 50 m Head a) Main switch 100 Amp. 2 No. (L&T Siemens, ABB) b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 700 LPM x 50 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 2 Nos. of approved make. g)Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) Ref. no. 3.1.1

For 2 no Pumping Sets of 600 LPM x 65 m Head a) Main switch 100 Amp. 2 No. (L&T Siemens, ABB) b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 600 LPM x 65 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 2 Nos. of approved make. g)Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) Ref. no. 3.1.2

For 2 no Pumping Sets of 800 LPM x 45 m Head a) Main switch 100 Amp. 2 No. (L&T Siemens, ABB) b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T) c) Digital Multi-function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 800LPM x 45 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 2 Nos. of approved make. g)Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) Ref no. 3.1.3

For 2 no Pumping Sets of 600 LPM x 45 m Head a) Main switch 100 Amp. 2 No. (L&T Siemens, ABB) b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 600 LPM x 45 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 2 Nos. of approved make. g)Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) Ref. no. 3.2.1

For 2 no Pumping Sets of 800 LPM x 45 m Head a) Main switch 100 amp. 2 No. (L&T Siemens, ABB) b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 800 LPM x 45 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 2 Nos. of approved make. g)Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) Ref. no. 3.2.2

For 2 no Pumping Sets of 400 LPM x 35 m Head a) Main switch 100 Amp. 2 No. (L&T Siemens, ABB) b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 400 LPM x 35 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 2 Nos. of approved make. g)Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) Ref. no. 3.3.1

For 2 no Pumping Sets of 800 LPM x 35 m Head a) Main switch 100 Amp. 2 No. (L&T Siemens, ABB) b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 800 LPM x 35 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 2 Nos. of approved make. g)Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) Ref. no. 3.3.2

Supply, erection, testing IS marked copper wire for various motor with underground system in PVC and flexible pipes copper wire 3 core complete in all respevts with accessories like thimble etc. i) 6mm2 3core

ii) 10mm2 3core

iii) 16mm2 3core

iv) 25mm2 3core

v) 35mm2 3core

Sluice Valves / NRV & specials for Pumping Machinery Supplying, fixing, jointing, testing & commissioning of DI sluice valves resilient sheet P.N. 1.6 as per DNIT specification on the pumping machinery & head works including cost of jointing material (IVC / VAG make) 100 mm i/d

Supplying, fixing of DI swing check type reflux (non returned valve) PN 1.6 of IVC/VAG make 100 mm i/d

Supply & Fixing of Mechanical Joints PN 1.6 alongwith ruber gaskit & galvanized nuts / bolts complete in all respect. a) 100 mm i/d

b) 150 mm i/d

c) 200 mm i/d

Supply and fixing of CI/ D/F pipe Specials, bends , reducers , Tee etc. including cost of Jointing materials, laying, jointing, in position as per specification

DI D/F Pipes. 100 mm i/d

Sluice Valves/ Specials For Head works & Rising Mains Supplying, fixing, jointing, testing & commissioning of DI sluice valves resilient sheet P.N. 1.6 as per DNIT specification on the pumping machinery & head works including cost of jointing material (IVC / VAG make) For Head works & Rising main lines 100 mm i/d

Supply and fixing of D.I.Specials (KISWOK & Misal DMJ & Electrosteel) bends , reducers , Tee etc. including cost of Jointing materials, laying, jointing, in position as per specification For Water works & R/W Pumping Station

For IBS Badal

For Rising Main lines

For Village Distribution

Supply & Fixing of Mechanical Joints PN 1.6 along with ruber gaskit & galvanized nuts / bolts complete in all respect. 100 mm i/d

Providing & fixing of D.I. Kinetic Air Valve soft seated as confirming to I.S.I. complete in all respect. 80mm

Supply erection testing and commissioning of exhaust fans each having a capacity of 45 cubic meters per minutes, complete in all resct ( 2 at Raw water pumping Station + 4 water works + 3 at IBS-1 + 6 at Various VBS = 15 )

Supply erection & testing of Ceiling fan of size 48" i/d (1200 mm) of reputed ISI make complete in all respect for various Pump Chambers ( 2 at Raw water pumping Station + 4 water works + 3 at IBS-1 + 6 at Various VBS = 15 )

Supply, Erection, Testing of reputed make LED light 100 Watts with fitting and accessories complete in all respect (Bajaj/Phillips & Crompton)

Supply erection, and commissioning electric operated dewatering pump of 3 HP Kirlosker make complete from priming with wiring starters switches etc. also the required GI pipe (B Class) valves and sight glass etc. complete. ( 1 at RW P/Stn 1 at W/W = 2 no.)

Supplying and fixing of Gantry with chain pulley block of following capacity with traveling trolley of appropriate lifting capacity for handling of pumping sets capable of moving along the girders to be provided in the pump house complete in all respects as per specifications approved by Engineer-in-Charge. 3 Ton Capacity at RW P/Stn + Water Works

Supply erection testing and commissioning of Flow Meter (KRONE Make) with digital display of 150 mm i/d complete in all respect.

Providing & fixing S.S floating arme 350 mm size along with swivel bend as per required specifications approved by Engineer-in-Charge

Supplying, fixing, jointing, testing & commissioning of MS sluice Gate valves per DNIT specification including cost of jointing material (IVC / VAG make) 350 x 350 mm size

Operation and maintenance for the complete scope of work mention in the DNIT (Disinfection material supplied by the PHED) as per schedule-IV for a period of 5 Year after 12 Months during defect liability period 3 Months trail run (Will be charged to the A/Mtc Estimate. Operation and maintenance during defect liability period (Operation only)

ii) Operation and maintenance during 2nd Year.

iii) Operation and maintenance during 3rd Year.

iv) Operation and maintenance during 4th Year.

v) Operation and maintenance during 4th Year.

Bidder Name

Amount

MAHA LAXMI CONSTRUCTION COMPANY

RATHEE CONSTRUCTION CO

suresh kumar

Kulbir Singh Contractor

MAHA LAXMI CONSTRUCTION COMPANY

RATHEE CONSTRUCTION CO

Kulbir Singh Contractor

Kulbir Singh Contractor

RATHEE CONSTRUCTION CO

MAHA LAXMI CONSTRUCTION COMPANY