SPECIAL REPAIRS TO BUILDING P-51 AND P-90 UNDER GE (NORTH) BANGALORE

Amount

Demolition of brick work / Stone Masonry /PCC Block masonry built in cement mortar of any description all as specified and directed.

Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description & in any position not specifically provided for complete all as specified and as directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and as directed

Demolition of Stone Slab and tiles of any description or thickness in floors, aprons etc (Laid bedded and pointed in any cement mortar) etc complete all as specified and as directed

Taking down cement plaster of any description hacking for key or raking out joint on old brick work/stone/concrete surface etc complete all as specified and as directed

Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each etc complete all as specified and as directed

Taking down chowkats or frames with shutters (without taking off shutter from frames) exceeding 1.5 Sqm but not exceeding 4.0 Sqm each etc complete all as specified and as directed

Taking down steel tubing and connections including cleaning for re fixing serviceable pipe or removal balance pipe of 20 mm dia bore complete all as specified and as directed

All as per item No 1.009 above but 25 mm dia bore

All as per item No 1.009 above but 40 mm dia bore

Dismantling of cast iron or reinforced / PVC (SWR) / concrete drain pipe up to 150mm dia including fittings, jointed in cement mortar and taking out trenches if required etc complete all as specified and directed

Dismantling water tanks exceeding 500ltr but not exceeding 1000 litre and removing to store etc complete all as specified and as directed

All as per item no 13 above but exceeding 250 litre but not exceeding 500 litre capacity

All as per item no 13 above but exceeding 1000 litre & not exceeding 2000 ltr capacity

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and as directed

Material and Labour for Steel tubular work for structural as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks etc complete all as specified and as directed

Supply and Fixing of Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/ cladding to wall, fixed with self tapping screws etc including dismantling of Asbestos cement (corrugated, semi corrugated, etc.) etc complete all as specified and as directed

Supply and Fixing of Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in ridges / valley to wall, fixed with self tapping screws including dismantling of Ridges etc complete all as specified and as directed

Material and Labour for 75 mm thick cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as in sub base of flooring etc complete all as specified and as directed

Material and Labour for 25 mm thick Cement concrete type B-0,1:2:4 (12.5mm graded aggregate) as in levelling course of flooring etc complete all as specified and as directed

Material and Labour for screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes complete all as specified and as directed.

Material and Labour for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed

Material and Labour for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed

Material and Labour for Vitrified ceramic tiles 9 to 10 mm thick (Dark Shade) (Square/rectangular) area of each tile not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed

Material and Labour for screed bed or bedding layer of mortar 20mm thick in CM 1:6 for laying floor finishes complete all as specified and as directed.

Material and Labour for 18 to 20mm thick Granite stone slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including grinding the edges half round and polishing including etc complete all as specified and directed.

Material and Labour for rendering 10 mm thick in cement mortar 1:3 on fair faces of brick work or concrete surface as backing coat of dado/skirting etc complete all as specified and as directed

Material and Labour for Glazed ceramic coloured tiles 300X450X7mm thick as in skirting / dado, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as specified and as directed

All as per item No1.025 above but as in skirting /dado etc complete all as specified and as directed

Material and Labour for 75 mm thick PCC 1:3:6, type C-1, using 20 mm graded aggregates as in plinth protection etc, finished even and smooth without using extra cement complete all as specified including joints filling with sealing compound Grade "A" complete all as specified and directed.

Material and Labour for exterior grade, coloured glossy finish rubber pressed, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc. complete all as specified and as directed

Supply and spreading of M-sand as cushioning material complete all as specified and directed

Material and Labour for machine pressed pre-cast concrete interlocking coloured paving Block of glass fiber reinforced glossy finished vibro compacted any shape and size confirming to IS-15658-2006 of 60 mm thick, M-35 grade to match with grey cement and pigment etc complete all as specified and as directed

Supply and Fixing of 1.25 mm thick pressed steel frame of size 105 X 60 mm for door with one or more rebate including necessary fixing lugs, locks strike plate etc complete all as specified and as directed

Material and Labour for cement concrete 1:3:6 type C-1 (using 20mm graded aggregate) as in hold fast and filling of pressed steel chowkhat etc complete all as specified and as directed.

Supply and Fixing of 35mm thick flush shutter solid core construction with decorative choice lamination both sides of shutter, kiln seasoned and chemically pressure treated complete all as specified and as directed

Supply and Fixing for solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete as specified and directed (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

Supply and Fixing of factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (Stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelaminated PVC sheet on the front face and 2mm plain colour PVC sheet on back face etc complete all as specified and as directed.

Supply and Fixing of Aluminium anodised tower bolt 200 mm long of extruded section etc complete all as specified and as directed

Supply and Fixing of aluminium alloy, anodised sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc complete all as specified and as directed

Supply and Fixing of 100 mm thick stainless steel butt hinges, heavy weight, and fixed etc complete all as specified and as directed

Supply and Fixing of 150 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed

Supply and Fixing of Powder Coating (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

Supply and Fixing of Powder Coating (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, fixed/Sliding type without sash bar, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified complete all as specified etc. complete all as specified and as directedNote - Wire Cloth & Glass shall be measured and paid separately under respective items.

Supply and Fixing of Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and as directed.

Supply and Fixing of 4mm thick Figured glass, pin head type and glazing with oil putty in squares in not exceeding 0.5 sqm in each pane etc complete all as specified and as directed

Material and Labour for providing and laying water proofing treatment to sunken portion of WCs, bathroom and kitchen etc by applying cement slurry mixed with two component Elastomeric Acrylic based polymer modified cementitious composite compound coating of make as approved in TI 5/2003 including demolition and removal the same from site of existing treatment of any type. The following procedures to be adopted during the execution of work :-(i) Demolition of existing treatment of any type including cleaning and removal of debris from site. (ii) First layer of slurry of cement @ 0.488 kg/sqm mixed with Acrylic based polymer modified cementitious composite compound @ 0.253 kg/sqm. The layer will be allowed to air cure for 4 hours. (iii) Second layer of slurry of cement @ 0.242 kg/sqm mixed with with Acrylic based polymer modified cementitious composite compound @ 0.126 kg/sqm. The layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. (iv) 20mm thick screed in cement mortar 1:3 mixed with liquid water proofing compound as per manufacturer’s instructions above the treated area. (v) Ponding the treated portion least 48 hours. If any leakage/seepage observed the entire procedures will be repeated without any extra cost. (vi) Provide 40mm dia light grade GI spout at the lowest point with 30cm projection beyond the out face of the wall. (vii) Sunken portion shall be filled with lean concrete 1:5:10 type E-2(using 40mm graded stone aggregate).

Material and Labour for Pre-cast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:6 etc complete all as specified and as directed

Material and Labour for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc complete all as specified and as directed

Material and Labour for Pre-cast Cement concrete Type 1:3:6 using (20 mm graded stone aggregates) with solid blocks, exceeding 10 cm in width and setting in CM 1:6 all as specified and directed.

Material and Labour for rendering 15 mm thick in CM (1:6) on fair faces of brick work or concrete surface finished even and smooth (without using extra cement) etc complete all as specified and as directed

Material and Labour for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surface finished even and smooth (without using extra cement) mixed with water proofing compound as per manufacture instruction etc complete all as specified and as directed. Notes : WPC shall be measured and paid separately

Material and Labour for rendering 5mm thick on concrete surfaces of ceiling etc in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and as directed.

Material and Labour for cement concrete 1:2:4 type, B1 using 20 mm graded stone aggregates as in copings, Chajja kerbs, roof padding/staging of water tank etc including necessary from work, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

Material and Labour for Screed or bedding layer of mortar 10 mm thick in CM (1:3) laid over roof slab to receiving water proofing membrane mixed with WPC as per manufacture instruction etc complete all as specified and as directed. Notes : WPC shall be measured and paid separately

Material and Labour for removing all loose gravel, dirt, oil, grease and foreign materials by jet or dry air, cleaning the surfaces mechanically or by grinding to make it smooth and APP modified water proofing membrane as per IS 1654-2017/IS 16352-2017, 3mm thick and weighing not less than 3.60kg/Sqm reinforced with non woven polyester/HMHDPE matt black finished over compatible primer/bonding bitumen @ 0.40 Litre/Sqm and torch applications of membrane with 75mm side overlap and 100mm end lap after necessary preparation of surface complete as per manufacturer's instructions and applying a coat of solar reflective bituminous aluminum paint on top @ 0.10 litre/sqm complete all as specified and directed including taking down existing roof treatment of any types including HP clay tiles etc along with cement plastering etc including removing of debris exceeding 1.50 Km etc complete all as specified and directed.

Supply only Liquid water proofing compound

Supply and Fixing 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified.

Supply and Fixing of 25 mm dia bore medium grade galvanized iron, tubing with all fitting and fixed complete to walls and ceilings or laid etc complete all as specified and as directed

All as per item No 1.060 above, but 40 mm dia bore of pipe

Material and Labour for rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I capacity of tank 2000 ltrs complete all as specified and directed

All as per item 1.062 above, but 500 ltr capacity

All as per item 1.062 above, but 1000 ltr capacity

Supply and Fixing 25 mm dia of bore ball float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and as directed [Minimum weight for 20 mm – 210 gms]

Supply and Fixing in repairs 25 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and including taking down old gate valve all as specified and as directed.

Supply and Fixing in repairs white vitreous china one piece wash basin of oval shape of size 560X410X180mm excluding taps but including 32 mm dia chromium plated fitting, PVC waste pipe 610 mm long and PVC connection 450 mm long complete all as specified and as directed

Supply and Fixing in repair vitreous china wash down water closet pan (Pedestal Pan) including fixing bolts, flush pipe anti syphonage pipe, plastic water closet seat , black closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device etc complete of Cera model cat pt no. 2008 including plastic EWC seat cover, coloured closed pattern with flat bottom and cover of Cera model cat pt 2308 and mild steel chromium plated or aluminized hinging device etc complete all as specified and as directed

Supply and Fixing in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including PVC SWR P trap connecting to flush pipe and to anti syphonage pipe, etc. complete including making good to floor, fixed in repairs complete all as specified and directed.

Supply and Fixing in repairs Vitreous China urinals, Full Stall type, complete including providing and fixing plugs, beddings urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. PVC waste pipe 610 mm long and PVC connection 450 mm long complete all as specified and as directed

Supply and Fixing in repairs PVC deo flushing cistern valve less, low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets & connection to pipe etc including PVC connection 450 mm long complete all as specified and as directed (Make Cat no BA-502 of Prayag of equivalent make of Cera)

Supply and Fixing in repairs Brass CP wall mixer for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed (Cat No-PIS-75H of Neptune series of Prayag or equivalent make as specified in CA)

Supply and Fixing in repairs 15 mm Centre hole Basin mixture W/o Pop Up all as specified and as directed.(Cat No PIS-50 H Neptune series of Prayag or equivalent make as specified in CA)

Supply and Fixing in repairs chromium plated long body bib tap 15mm dia with CP flange all as specified and as directed. (Cat No-PIS-08H Neptune series of Prayag or equivalent make as specified in CA)

Supply and Fixing Bib Cock 2 way double handle with CP flange as fixed in repair all as specified and as directed. (Cat No-PIS-12H Neptune series of Prayag or equivalent make as specified in CA)

Supply and Fixing in repairs 15 mm pillar taps swan neck type, chromium plated cast copper alloy fancy type complete all as specified and as directed.(Cat No PIS-14H Neptune series of Prayag or equivalent make as specified in CA)

Supply and Fixing in repairs 15mm angle cock CP cast copper alloy screwed down high pressure with capstan head handle screwed both ends or for unions etc . (Cat No PIS-10H Neptune series of Prayag or equivalent make as specified in CA)

Supply and Fixing in repairs 100mm (4") overhead shower ABS with brass Arm (225mm) & flange including fixing to steel pipe or union complete all as specified and as directed. (Cat No BS-73 Neptune series of Prayag or equivalent make as specified in CA)

Supply and Fixing in repairs Mirror 600x450 x 5-6mm thick with frame cat No BLM-01F of PRAYAG or equivalent make complete all as specified and directed

Supply and Fixing in repairs PVC (SWR) multi floor trap, plain with grating including jointing with solvent cement etc complete all as specified and as directed

Supply and Fixing in repairs toilet roll paper holder etc complete all as specified and as directed (Make Cat no BA-38 of Prayag of equivalent make of Cera)

Supply and Fixing in repairs soap dish holder with glass etc complete all as specified and as directed (Make Cat no BA-25G of Prayag of equivalent make of Cera)

Supply and Fixing in repairs Hand shower (Health faucet) (ABS Body) with 8 mm dia, 1.20 metre long flexible tube & wall hook etc complete all as specified and as directed Prayag of equivalent make of Cera)

Supply and Fixing in repairs SS Grab bar Towel rail 450 mm long incl fixing arrangement etc complete all as specified and as directed (Make Cat no GM-04 of Prayag of equivalent make of Cera)

Supply and Fixing in repairs Towel rack Brass glossy finish complete all as specified and directed (Cat No BA-03 of Prayag or equivalent make as specified in CA)

Supply and Fixing in repairs Towel ring Brass glossy finish complete all as specified and directed (Cat No BA-02 of Prayag or equivalent make as specified in CA)

Supply and Fixing in repairs Unbreakable (Square) wall mounted shelf 500mm (Cat No BEA-47A of Prayag or equivalent make as specified in CA) complete all as specified and directed

Supply and Fixing in repairs Unbreakable corner shelf (3Pcs set i.e 8"-1, 10"-1 & 12"-1) (Cat No BEA-44A of Prayag or equivalent make as specified in CA) complete all as specified and directed

Supply and Fixing of 110mm PVC, SWR pipes, single socketed in any length with rubber ring joint laid in trenches or in floor complete all as specified and directed

Ditto- all as per item No. 1.090 above but 75mm bore pipe complete all as specified and directed

Supply and Fixing of 150 mm PVC (SWR) pipes, single socketed in any length with rubber ring joint fixed to stone masonry wall with suitable GI bracket etc complete all as specified and directed.

Supply and Fixing of 110mm PVC, SWR pipes, single socketed in any length with rubber rings joint fixed with wall complete all as specified and directed. Notes : Work required to be carried out hts from ground level to 20 mtr. Contractor shall arrange necessary scaffolding or any other T&P requiredd to fixed the pipes. Nothing Extra shall be admissible on this account

Supply and Fixing of 150 mm dia bore PVC bends (any radius) etc complete all as specified and as directed

Supply and Fixing of PVC bends (any radius) of 110mm dia.

Supply and Fixing of PVC Brach Pieces double (double Y) equal or unequal of 110mm dia.

Supply and Fixing of PVC (SWR) bends (any radius) of 75mm dia.

Supply and Fixing of PVC (SWR ) vent cowls of 110mm dia.

Complete removal existing treatment (External/Internal wal/Ceiling ) by means of wire brushing, sand paper, manually or mechanically up to visible of plastered surface including rubbing and washing etc complete all as specified and as directed

Material and Labour for 1mm thick wall care putty on wall including preparation of surface with sand paper etc to obtain smooth surface etc complete all as specified and as directed

Material and Labour for Preparing previously untreated plastered surface of ceiling and applying two distemper oil emulsion over a coat of primer etc complete all as specified and as directed

Material and Labour for Preparing previously untreated plastered surface of walls and applying two coats plastic Emulsion Paint over a coat of primer etc complete all as specified and as directed

Material and Labour for Preparing old or previously untreated Plastered / concrete surface of wall with complete removal of grass, algae, roots of any other foreign mtrl of any description including brooming down with steel wire brushing scrapping down smoke soot's, moulds, moss and efflorescence, salts ,trading oil and greasy spots etc and Applying two or more coats of 100% premium acrylic emulsion paint (Apex Ultima) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company depot tinted) with silicon additives @ 1.43 litre/10sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm including filling the cracks etc with crack filling material as per manufacturer’s instructions complete all as specified and as directed.

Material and Labour for Preparing new plastered surface of walls and applying two coats distemper oil emulsion, white or tinted over a coat primer complete all as specified and as directed

Material and Labour for preparing new plastered surface of ceiling and applying thee coat of white wash etc complete all as specified and as directed

Material and Labour for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed

Material and Labour for Preparation of Old Painted steel surface of any description, over 10 cm in width or girth , not otherwise described and painting with one coats of synthetic enamel paint etc complete all as specified and as directed

Material and Labour for preparing Old Plastered surface of wall and applying one coat of distemper oil emulsion etc complete all as specified and as directed

Material and Labour for preparing Old Plastered surface of ceiling and applying two coat of white wash etc complete all as specified as directed

Removing building materials etc. (other than spoil payable under items 03028 to 03031 in Section-3—Earthwork) to a distance of exceeding 1.0 Km but not exceeding 1.50Km, beyond the lead included in the rates, including loading, unloading and stacking at the destination etc complete all as specified and as directed

Taking down carefully aluminium/ copper wiring/power point wiring (light, fan, socket or power) complete including fittings such as switches ceiling roses, pendants, regulators, sockets light fittings, fans etc and making good the disturbed surface of walls, ceiling etc including painting with same colour of the back ground complete all as specified and as directed by Engineer-in-Charge.

Wiring complete with 1.5 Sqmm single core PVC insulated unsheathed FRLS cable 1100 volts grade multi stranded with copper conductor conforming to IS 694 drawn through and including non-metallic rigid PVC conduit including accessories , surface mounted / concealed type run on walls/ ceiling including MS terminal boxes fabricated with 1.6 mm thick MS sheet concealed on walls with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch socket outlets, fan regulators etc., incl provision of 1.5 Sqmm PVC insulated single core multi stranded FRLS copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed.(a) One light point controlled by one switch

(b) One fan/Exhaust fan point controlled by one switch/regulator

Wiring complete with 2.50 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with copper conductor conforming to IS 694 drawn through and including non-metallic rigid PVC conduit including accessories concealed type, run on walls/ ceiling incl MS terminal boxes fabricated with 1.6 mm thick MS sheet surface mounted/ concealed on walls with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch socket outlets, fan regulators etc., incl provision of 4.0 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed. Note for Item No 2.02 to 2.03 :-(i) The earth wire for the points in the same circuit can be looped from point to point.(ii) Earth wire shall be taken inside the conduit. (iii) Cost of terminal box is deemed to be included in the item rate quoted for point wiring(iv) Cost of a circuitof any lenth of cable from DB to any switch /socket board to be included in point wiring.(v) Cost of cutting chase for conduits and making good to wall in case of recessed or concealed conduit wiring is included in point wiring rate.

Supply and Fixing of Modular switch 1 way 6A, 1 module all as specified and as directed

Supply and Fixing of Modular switch 1 way 16A, 1 module all as specified and as directed

Supply and Fixing of Modular Socket 6A/16A-2/3 pin, combined 2 module all as specified and as directed

Supply and Fixing of wall mounted LED batten, suitable for indoor applications 1x20 watts,4 feet with extruded aluminium housing & integrated LED channel complete with three core flexible copper conductor accessories all as specified and as directed. Make: Bajaj Cat part No BCLAB 20WH LED P or equivalent makes and model in Havells/Philips/CG.

Supply and Fixing in replacement ceiling rose, surface Bakelite type 65 x 50 mm, 2 to 3 terminals all as specified and as directed

Supply and Fixing of exhaust fan AC single phase 230/240V of size 300 mm sweep, heavy duty, metal body ,1400 RPM with louver including making of hole for exhaust fan and finishing the holes including fixing of louver, wiring complete all as specified and directed. Make: Bajaj Cat part No 70068 or equivalent makes and model in Havells/Khaitan.

Supply and Fixing of Double Door vertical type DB SPN 4 Way 240 Volt with 200 Amps rated Bus Bar including necessary dummy plate.

Supply and Fixing of connecting and testing Isolator/MCB single (SP), 440 Volts of capacity 6 -32 Amps.

Supply and Fixing of connecting and testing MCB single Neutral (SPN), 440 Volts of capacity 40 Amps

Sub main wiring complete with two runs of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 4 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through existing non metallic rigid PVC conduit and conduit accessories incl removing of the existing sub main wiring all specified and as directed.Note: 3 runs of cable will be measured as unit length.

Material and Labour for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr connected to galvanized Wire 4 mm as earth lead up to 7.5 mtr long by means of nuts, bolts, thimbles, check nuts and washers etc made of galvanized iron connected to earthing test point all as shown in electrical plate No 3 of SSR Part-I 2010 and as specified or indicated and testing on completion including earth work and excavation in any type of soil PCC (1:3:6) type C1 chamber, pre cost slab 40mm thick in cement concrete (1:2:4) type B1 with 8 mm dia MS bars reinforced at 10 cm centre to centre both ways incl funnel with watering pipe wire mesh and lugs, incl test point complete all as specified and as directed

Dismantling, Taking down and keeping in safe custody for Shifting of Solar water heater after roof treatement complete all as specified and as directed.

GI Tubes 'Medium grade' 15mm dia galvanized with all fittings laid in trenches / wall / roof / floor complete all as specified and as directed.

GI Tubes 'Medium grade' 25mm dia galvanized with all fittings laid in trenches / wall / roof / floor complete all as specified and as directed.

GI Tubes 'Medium grade' 50mm dia galvanized with all fittings laid in trenches / wall / roof / floor complete all as specified and as directed.

Gun-metal, globe or gate valve 15mm dia with iron wheel head, screwed both ends for iron pipe and fixed all as specified and as directed

Gun-metal, globe or gate valve 25mm dia with iron wheel head, screwed both ends for iron pipe and fixed all as specified and as directed

Gun-metal, globe or gate valve 50mm dia with iron wheel head, screwed both ends for iron pipe and fixed all as specified and as directed

S L R Construction

Vasavi Electricals

D NAGI REDDY

Elite Constructions

M/S SIRI BUILDERS

K. VENKATESH NAIDU