Design, Supply, Installation, Testing and Commissioning of PLC automation for 4 x 2000 KVA HT DG set and HT distribution panels at Main and Bharti Substations, IIT Delhi

Amount

Supplying and laying of FRLS industrial multistranded copper conductor armored control cable of Following size, 1.1 KV grade, direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. etc. as required [conforming to I.S-7098(Part 1) 1988].

24 core X 2.5 sq. mm

Supplying and laying and Fixing of RLS industrial multistranded copper conductor armored control cable of Following size, 1.1 KV grade, on wall surface as required.Upto 35 sq. mm (clamped with 1 mm thick saddle) [conforming to I.S-7098(Part 1) 1988.

24 core X 2.5 sq. mm

Supplying and making end termination with brass compression gland and tinned copper lugs for following size of PVC insulated and PVC sheathed / XLPE copper conductor cable of 1.1 KV grade as required.

24 core X 2.5 sq. mm

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.

150 mm width X 50 mm depth X 1.6 mm thickness

Fabrication, supplying, installation, testing and commissioning of Non- Redundant PLC control Panel of cubicle, construction of suitable size, floor mounted type, fabricating out of 1.6 MM thick CRCA sheet, with hinged, lockable doors, dust and vermin proof, Power coated of approved make after 07 treatment process, having Switchgear and accessories mounting and internal wiring, earth terminal numbering etc. complete in all respect, suitable for auto automatic sequential operation of HT VCB's in HT distribution panel as per specification comprising following accessories for proper running and switching of all VCB in a sequential manner and then switching off, load transfer to normal mode etc. as per requirement. Plc panel [ 2000(H) x 800(W) x 1000(D)] (Front & Rear Access) - 01 Nos. M580 PLC controller -01 Nos. M580 PLC power supply 01 Nos. M580 PLC DI module- 32 channel digital input module with 20% spare input signals -06 Nos. M580 PLC DO modules- 32 channel digital output module with 20% spare output signals - 03 Nos. CAT 5e Ethernet patch codes - as req.

Interposing relay panel for DO signal:- Relay cabinet [ 2000(H) x 1000(W) x 800(D)] -01 Nos. Interposing relay for DO coil rating, 24 V, DC and contact rating 110 V dc- 94 Nos. Terminals - Lots. Switch mode power supply - 02 Nos. Redundancy diode module - 01 Nos. Dummy panel for DI signals:- Dummy cabinet [ 2000(H) x 800(W) x 800(D)] -01 Nos. 32 channel digital input module - 01 Nos. 32 channel digital output module - 01 Nos. 5 metre CAT 5e ethernat patch cords - 05 Nos. PLC for logical operation of VCB's for load transfer from Main to DG and vice versa with settling time discrimination and suitable number of input and output along with providing and installation of software etc. as complete as required.

Supplying, installation, testing and commissioning of 02 kVA online 03 phase, UPS system, with 30 minute power backup including batteries, battery rack and interconnecting cable etc. as complete as required.

SWASTIK ELECTROTECH PVT LTD (BID ID -3119848)