RENOVATION REPAIR OF JOINERY IN SMQ TMQS AT AF STN BHISIANA

Amount

Taking down PVC Chowkat or Frame of any description (without taking off Shutter from the Frame) not exc. 1.50 Square Metre Each, complete all as specified and as directed.

Taking down Chowkats & Shutters without taking off shutters from the frame, size of opening exc. 1.50 sqm but not exc 4 sqm each complete all as specified and as directed.

Taking down Shutters of any description exc. 1.00 Square Metre and not exc. 2.00 Square Metre Each, complete all as specified and as directed.

S&F Pressed Steel Frame of size 125x60mm using 1.25mm thick Mild Steel Sheets for Doors with One or More Rebates including necessary Fixing Lugs, Hinges, Lock Strike Plate, etc., complete all as specified and as directed.

S&F Pressed Steel Frame of size 105x60mm using 1.25mm thick Mild Steel Sheets for Doors with One or More Rebates including necessary Fixing Lugs, Hinges, Lock Strike Plate, etc., complete all as specified and as directed.

M&L Cement Concrete 1:3:6 type C-1 (20mm graded crushed stone aggregate) as in Filling Back side of Chowkats, complete all as specified and as directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (stile), consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification and drawing complete all as specified and directed.

S&F 100mm size PVC butt hinges complete all as specified and directed.

S&F 100mm size PVC handles all as specified and directed

S&F 150mm long PVC tower bolt all as specified and directed.

Supply and fixing IInd class hard wood (Hollock) 35mm thick plain framed, factory made panelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (part – I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Supply and fix glazed and skelton shutter IInd class hard wood 35mm thick,open rebated and prepare to receive glass, gauge etc. (without sash bars) edge of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc and including glazing 3 mm thick and fixing wire cloth complete all as specified and directed.

S&F 100mm Butt hinges medium weight, cold rolled mild steel

S&F 200mm Aluminium anodised barrel tower bolts of extruded section and fixed

S&F 150mm Aluminium handles, cast type anodised

S&F 250 mm Mild steel Sliding door bolts plate type stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts,four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F Mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed.

S&F Floor door stopper of size 140mm of aluminium ally body and tongue, anodised, with hard drawn steel spring fixed in floors.

S&F Box type steel windows glazed & gauged factory made MS square/rectangular ERW Hollow pipe of gauge 18 with side hung shutters including box type hinges with steel handle and steel peg stay, and including stainless steel wire cloth 1.14mm dia and 4mm thick glass fixing with putty and glazed pins and including 8mm or 10mm dia square bar at equal spacing n.exc 150mm c/c grills and guard bar including preparation & applying two coats of Synthetic enamel paint over a coat of red oxide complete and making good the disturbed portion with PCC or Plaster and painting the surface to match with existing surface and including taking down old existing window with frame complete all as specified and as directed.

S&F box type steel ventilator glazed & gauged factory made with side hung shutters including box type hinges with steel handle and steel peg stay,necessary grills and guard bars and 4mm thick froasted glass including preparation & applying two coats of Synthetic enamel paint over a coat of red oxide including taking down existing window and making good the disturbed portion with PCC or Plaster and painting the surface to match with the existing surface and including taking down old existing ventilator with frame complete all as specified and as directed.

M&L for preparation of new or previously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and ditected.

Supply and fixing Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tack or galvanised wire staple complete.

S&F in repairs MS curtain rod 20mm dia pvc coated with fixing brackets and ends cap (latoo) complete all as specified and directed.

Dismantling boarding of any description including hardware fittings ,fixed in any position with nails etc complete.

S&F Factory made PVC cupboard sides, top & bottom frame (Each side measured Seperately ) , 30mm thick (hollow) with a wall thickness of 5mm made out of extruded 5mm thick plain/printed / prelam PVC sheet reinforced with 19mm x 19mm MS square tubes of 19 gauge thickness throughout the frame and mitre cut at two corners and jointed with two numbers 150mm long brackets of 10mm x 10mm square tubes and cupboard frame shall be fixed to the wall using 65/100mm long MS screws through the frame by using PVC fasteners. A minimum of 4 nos of screw to be provided for each vertical member and minimum of 2 nos of srew to be provided horizontal member etc complete as per manufacter's instructions and all as specified and directed .Note :- Making good the disturbed side plastering and Painting with existing colour (Distemper/OBD ) included in the item

S&F Factory made PVC cupboard shutter of 30 mm thick consisting of frame made out of MS tubes of 19 gauge thickness and size 19mm x 19mm covered with panneling of 5mm plain plus 5mm thick prelaminated PVC sheet fitted in the MS frame and sealed to the front stiles and rails which should having 20mm x15mm wide PVC biding and attached to back stiles and rails (which should have a 5mm 45 degree bend portion as beding) and decorative PVC beding is used on the front side of pannel externally impart perfect finish to the shutter and joint together with solvent cement adhesive complete all as specified and directed.

S&F Factory made PVC drawer of required size (Each side measured Seperately ) constructed by joining two nos 5mm thick plain PVC sheet at the sides and bottom joint together with solvent cement adhesive complete all as specified and directed.

S&F Factory made PVC centre partition shelfs of 25mm thickness consisting of MS Frame made out of MS tubeof 19 guage thickness and size of 15x15mm inserted all around the hollow profile section and insert 15mmx15mm MS tube in the centre of this section and liped with 10mm (5mm x2 ) thick plain PVC sheet at the top and bottom and 20mm wide and 15mm thick on sides using solvent cement adhesive complete all as specified and directed .

S&F 5 mm thick termite proof, water proof and fire retardant laminated PVC sheet jointed together at front side of Cupboard drawer frame using solvent cement adhesive complete all as specified and directed by Engr-in-charge.

S&F 5mm thick termite proof, water proof and fire retartant plain PVC sheet jointed together & fixed on back side of Cupboard frame using solvent cement adhesive complete all as specified and directed by Engr-in-charge.

S&F 30 to 50mm wide and 5 mm thick laminated PVC leeping in front of the cupboard to be edge bonded using on the edges etc complete all as specified and directed.

S&F Continous piano hinges stainless steel, bright finish width of flaps when open 40 mm complete all as specified and directed by Engr-in-charge.

S&F Stainless steel handle, 125 mm complete all as specified and directed by Engr-in-charge.

S&F Magnetic catcher for cupboards complete as all specified and directed by Engineer in Charge complete all as specified and directed .

S&F 40 mm wide Mild Steel telescopic channel fixed to drawer with screws complete all as specified and directed .

Supply and fixing Hasp and staple safety type aluminium powder coated with mild steel pin inculding bolt to hinge plate and fix with screws 150 mm size of hasps and staples.complete all as specified and directed .

S&F mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, cooler stands and similar work con- forming to Fe.290.Gde-E-165 including necessary welding, drilling hole complete.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface all as specified and directed

M&L for Cement concrete 1:3:6 type D2 ( 40 mm graded aggregate) in foundations, filling and mass-concrete complete all as specified and directed

S&F 4mm dia galvanised steel wire for hanging cloth including fixing of straining bolts, hooks, eyes, etc. complete all as specified and directed.

M&L for Preparation of New or Previously untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of redoxide exposed to view surfaces complete all as specified and directed.

REYANSH GARG AND COMPANY

GUPTA AND ENGINEERS