REPAIR AND MAINT OF LT EXTERNAL ELECT WORKS, LT PANELS AT HQ 10 SECTOR RR, 29 RR AT PATTAN GRN UNDER AGE (I) CIF(K).

Amount

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for laying of cable and foundation of poles, stays etc. and getting out in any type of soil, complete all as specified and directed by the Engineer-in-Charge.

Excavation in trenches not exceeding 1.5 metre wide and exceeding 1.5 metre in depth but nexc 3.5mtr depth for laying of cable and foundation of poles, stays etc. and getting out in any type of soil, complete all as specified and directed by the Engineer-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick each layer in any type of soil complete all as specified and as directed by Engineer-in-Charge.

Removing excavated material not exceeding 50metre and depositing where directed at a level not exceeding 1.5metre above the starting point, complete all as specified and as directed by Engineer-in-Charge.

Sand cushioning to underground cable, provided with a layer 8 cm before and 15 cm after laying and stretching jointing and testing the cable, complete all as specified and directed by Engineer-in-Charge. Note: Punned thickness of sand shall be measured.

Common burnt sub class ‘B’ brick laid flat in trenches over and across the length of cable with length of brick perpendicular to the direction of cable adjacent/abutting each other for cable protection, complete all as specified and as directed by Engineer-in-Charge.

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.Note:- Volume of pole/strut shall be deducted for the purpose of payment.

M&L for PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in pedestal/coping including necessary weathering and form work etc complete all as specified and directed. Note:- Volume of pole/strut shall be deducted for the purpose of payment.

Supplying, laying, jointing and testing XPLE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 70 Sqmm, 3.5 core in trenches, through pipe, under culvert or in air including taking out/down and removing old unserviceable existing cable , complete all as specified and as directed by Engineer-in-Charge. Note: Neceesary Earth work shall be measured and paid for separately under respective item of this BOQ.

Supplying, laying, jointing and testing XPLE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 95Sqmm, 3.5 core in trenches, through pipe, under culvert or in air including taking out/down and removing old unserviceable existing cable, complete all as specified and as directed by Engineer-in-Charge. Note: Neceesary Earth work shall be measured and paid for separately under respective item of this BOQ.

Supplying, laying, jointing and testing XPLE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 120Sqmm, 3.5 core in trenches, through pipe, under culvert or in air including taking out/down and removing old unserviceable existing cable, complete all as specified and as directed by Engineer-in-Charge. Note: Neceesary Earth work shall be measured and paid for separately under respective item of this BOQ.

Supplying, laying, jointing and testing XPLE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 150Sqmm, 3.5 core in trenches, through pipe, under culvert or in air including taking out/down and removing old unserviceable existing cable, complete all as specified and as directed by Engineer-in-Charge. Note: Neceesary Earth work shall be measured and paid for separately under respective item of this BOQ.

Earthing complete with and including galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick surrounded by a mixture of charcoal and salt in alternate layers burried directly in ground vertically in a pit of depth not less than 2.25 m deep below ground level with top edge of earth plate at a depth of not less than 1.5 m below ground level, connected with and including galvanised iron strip 32 x 6mm as earthing lead by means bolts, nuts, check nuts and washers made out of galvanised iron, 40 mm bore (light grade) GI pipe for protection of earthing lead, 20 mm bore (light grade) GI pipe for watering with funnel, wire mesh including provision of concrete pit in plain cement concrete 1:3:6, type B-1 using 20mm graded crushed stone aggregate with 40 mm thick cover of reinforced cement concrete 1:3:6, type B-I, using 20 mm graded crushed stone aggregate, reinforced with XPM weight not less than 4 Kg /Sqm and frame of angle iron 40 x 40 x 4mm with lugs 02 Nos and with 6mm dia MS bar handle made to shape ,excavation and earth work in any type of soil, returning filling in and removal of surplus soil including testing including testing on completion, complete all as specified and and shown in electrical plate No 3 of MES Schedule 2009 Part-I, complete all as specified and as directed by the Engineer-in-Charge. Note: Earthing to be done for replacement of existing earthing. The materials retrieved from earthing shall be credited to contractor.

Supplying, jointing and connecting "as in repairs" cable end termination joint kit, out door, heat shrinkable type for underground cable including jointing kits and labour complete for making joints suitable for aluminium conductor cable of size 70 sqmm to 120 Sqmm 3.5 core, 1100 volts grade cable including excavation and earth work complete all as specified and directed.

Supplying, jointing and connecting "as in repairs" cable end termination joint kit, out door, heat shrinkable type for underground cable including jointing kits and labour complete for making joints suitable for aluminium conductor cable of size 150 sqmm to 185 Sqmm 3.5 core, 1100 volts grade cable including excavation and earth work complete all as specified and directed.

M&L for replacement of 40 mm bore galvanised steel tubing, light grade, with all fittings, for protection of cable, laid in trenches/road crossing/floor or fixed to pole/wall with and including 02 Nos. MS clamp of size 25x4 mm, nuts, bolts and washers complete all as specified and directed.

M&L for replacement of 50 mm bore galvanised steel tubing, light grade, with all fittings, for protection of cable, laid in trenches/road crossing/floor or fixed to pole/wall with and including 02 Nos. MS clamp of size 25x4 mm, nuts, bolts and washers complete all as specified and directed.

M&L for replacement of 80 mm bore galvanised steel tubing, light grade, with all fittings, for protection of cable, laid in trenches/road crossing/floor or fixed to pole/wall with and including 02 Nos. MS clamp of size 25x4 mm, nuts, bolts and washers complete all as specified and directed.

Replacement of existing Moulded Case Circuit breaker with new Moulded Case Circuit breaker 160 Amps, 35 KA of Capacity 415 V 50 Hz, 04 Pole to be fixed on existing LT Panel. , complete all as specified and directed by the Engineer-in-Charge.

Replacement of existing Moulded Case Circuit breaker with new Moulded Case Circuit breaker 200 Amps, 35 KA of Capacity 415 V 50 Hz, 04 Pole to be fixed on existing LT Panel. , complete all as specified and directed by the Engineer-in-Charge.

Replacement of existing Moulded Case Circuit breaker with new Moulded Case Circuit breaker 250 Amps, 35 KA of Capacity 415 V 50 Hz, 04 Pole to be fixed on existing LT Panel. , complete all as specified and directed by the Engineer-in-Charge.

Replacement of existing Moulded Case Circuit breaker with new Moulded Case Circuit breaker 400 Amps, 35 KA of Capacity 415 V 50 Hz, 04 Pole to be fixed on existing LT Panel. , complete all as specified and directed by the Engineer-in-Charge.

Supply, installation, commissioning and testing of totally enclosed outdoor type LT Panel in replacement weldless cubical Kiosk in modular bolted construction type dust and vermin proof floor mounted type (IP-65 degree of protection ) made out of 3 mm thick CRCA sheet of recommended size. All sheet metal parts separately chemically treated with 7 tank treatment process. The panel having both side opening door with locking arrangement,all doors fixed with aluminium hinges with suitable size nut bolts and shall have flexible fixing of each switchgear and controlgear compartment with cable alley tray of size not less than 30 cm. duly painted with two coats of synthetic enamel paint powder coated, bus bar 1000 amps rating made of aluminium strip duly drilled holes for connections and mounted on epoxy based post insulators for 3 phase 4 wire 415 volts 50 HZ AC supply ,hibling , cable entry boxes , cable gland and LT panel shall be mounted on iron angle frame made out of 50 X 50X 6 mm frame with 4 no. legs size not less than 45 cms fixed with nut bolts of suitable size (bottom portion of the panel) , grouted by using foundation 1:2:4 type C1 with 20 mm graded stone aggregates totally tested as per IEC 61439-I & II , suitable for and including taking down existing LT panel complete and including the following :-

(i) MCCB 4 pole, 415 volts, Adjustastable Thermal Magnetic (TM) type, 630 amp rating, microprecesser based energy with rupturing capacity 50 KA - 01 No. as income. Make - Legrand/Indoasian or equivalent

(ii) MCCB 4 pole, 415 volts, Adjustastable Thermal Magnetic (TM) type, 315 amp rating, microprecesser based energy with rupturing capacity 36 KA - 02 No. for outgoing Make - Legrand/Indoasian or equivalent

(iii) MCCB 4 pole, 415 volts, Adjustastable Thermal Magnetic (TM) type, 250 amp rating, microprecesser based energy with rupturing capacity 36 KA - 02 No. for outgoing Make - Legrand/Indoasian or equivalent

(iv) MCCB 4 pole, 415 volts, Adjustastable Thermal Magnetic (TM) type, 200 amp rating, microprecesser based energy with rupturing capacity 36 KA - 01 No. for outgoing Make - Legrand/Indoasian or equivalent

(v) MCCB 4 pole, 415 volts, Adjustastable Thermal Magnetic (TM) type, 100 amp rating, microprecesser based energy with rupturing capacity 36 KA - 01 No. for outgoing Make - Legrand/Indoasian or equivalent

(vi) Indicator set RYB -01 Set of 3 pcs only Make- L & T /AE

(vii) Multifunction digital panel meter suitable to display amps, volts, frequency etc - 01 No including CTs of appropriate ratio. Make- Schneider or equilent/L&T/Legrand

(viii) All accessories prewired with suitable size copper conductor cable or strip including foundation as per manufacturer instruction all as required and directed.

Supply, installation, commissioning and testing of totally enclosed outdoor type LT Panel in replacement weldless cubical Kiosk in modular bolted construction type dust and vermin proof floor mounted type (IP-65 degree of protection ) made out of 3 mm thick CRCA sheet of recommended size. All sheet metal parts separately chemically treated with 7 tank treatment process. The panel having both side opening door with locking arrangement,all doors fixed with aluminium hinges with suitable size nut bolts and shall have flexible fixing of each switchgear and controlgear compartment with cable alley tray of size not less than 30 cm. duly painted with two coats of synthetic enamel paint powder coated, bus bar 600 amps rating made of aluminium strip duly drilled holes for connections and mounted on epoxy based post insulators for 3 phase 4 wire 415 volts 50 HZ AC supply ,hibling , cable entry boxes , cable gland and LT panel shall be mounted on iron angle frame made out of 50 X 50X 6 mm frame with 4 no. legs size not less than 45 cms fixed with nut bolts of suitable size (bottom portion of the panel) , grouted by using foundation 1:2:4 type C1 with 20 mm graded stone aggregates totally tested as per IEC 61439-I & II , suitable for and including taking down existing LT panel complete and including the following :-

(i) MCCB 4 pole, 415 volts, Adjustastable Thermal Magnetic (TM) type, 400 amp rating, microprecesser based energy with rupturing capacity 50 KA - 01 No. as income. Make - Legrand/Indoasian or equivalent

(ii) MCCB 4 pole, 415 volts, Adjustastable Thermal Magnetic (TM) type, 250 amp rating, microprecesser based energy with rupturing capacity 36 KA - 02 No. for outgoing Make - Legrand/Indoasian or equivalent

(iii) MCCB 4 pole, 415 volts, Adjustastable Thermal Magnetic (TM) type, 200 amp rating, microprecesser based energy with rupturing capacity 36 KA - 01 No. for outgoing Make - Legrand/Indoasian or equivalent

(iv) MCCB 4 pole, 415 volts, Adjustastable Thermal Magnetic (TM) type, 100 amp rating, microprecesser based energy with rupturing capacity 36 KA - 02 No. for outgoing Make - Legrand/Indoasian or equivalent

(v) Indicator set RYB -01 Set of 3 pcs only Make- L & T /AE

(vi) Multifunction digital panel meter suitable to display amps, volts, frequency etc - 01 No including CTs of appropriate ratio. Make- Schneider or equilent/L&T/Legrand

(vii) All accessories prewired with suitable size copper conductor cable or strip including foundation as per manufacturer instruction all as required and directed.

Supply, installation, commissioning and testing of totally enclosed outdoor type LT Panel in replacement weldless cubical Kiosk in modular bolted construction type dust and vermin proof floor mounted type (IP-65 degree of protection ) made out of 3 mm thick CRCA sheet of recommended size. All sheet metal parts separately chemically treated with 7 tank treatment process. The panel having both side opening door with locking arrangement,all doors fixed with aluminium hinges with suitable size nut bolts and shall have flexible fixing of each switchgear and controlgear compartment with cable alley tray of size not less than 30 cm. duly painted with two coats of synthetic enamel paint powder coated, bus bar 600 amps rating made of aluminium strip duly drilled holes for connections and mounted on epoxy based post insulators for 3 phase 4 wire 415 volts 50 HZ AC supply ,hibling , cable entry boxes , cable gland and LT panel shall be mounted on iron angle frame made out of 50 X 50X 6 mm frame with 4 no. legs size not less than 45 cms fixed with nut bolts of suitable size (bottom portion of the panel) , grouted by using foundation 1:2:4 type C1 with 20 mm graded stone aggregates totally tested as per IEC 61439-I & II , suitable for and including taking down existing LT panel complete and including the following :-

(i) MCCB 4 pole, 415 volts, Adjustastable Thermal Magnetic (TM) type, 400 amp rating, microprecesser based energy with rupturing capacity 50 KA - 01 No. as income. Make - Legrand/Indoasian or equivalent

(ii) MCCB 4 pole, 415 volts, Adjustastable Thermal Magnetic (TM) type, 315 amp rating, microprecesser based energy with rupturing capacity 36 KA - 01 No. for outgoing Make - Legrand/Indoasian or equivalent

(iii) MCCB 4 pole, 415 volts, Adjustastable Thermal Magnetic (TM) type, 200 amp rating, microprecesser based energy with rupturing capacity 36 KA - 02 No. for outgoing Make - Legrand/Indoasian or equivalent

(iv) MCCB 4 pole, 415 volts, Adjustastable Thermal Magnetic (TM) type, 100 amp rating, microprecesser based energy with rupturing capacity 36 KA - 01 No. for outgoing Make - Legrand/Indoasian or equivalent

(v) Indicator set RYB -01 Set of 3 pcs only Make- L & T /AE

(vi) Multifunction digital panel meter suitable to display amps, volts, frequency etc - 01 No including CTs of appropriate ratio. Make- Schneider or equilent/L&T/Legrand

(vii) All accessories prewired with suitable size copper conductor cable or strip including foundation as per manufacturer instruction all as required and directed.

Trimming up of Bushes/ Tree branches upto 5 mtr all around security light poles & LT line, removing cut branches from site as directed, Note :- (i) The overhead lines will be kept clear from all trees by trimming of tree branches with 5 mtr all around the line. Necessary permission will be obtained from department by contractor one day prior to trimming in particular area and shut down of that area will be arranged by department. (ii) only effected Span at site shall be measured where tree branches are touching nearly LT lines complete all as specified and directed.

M&L as in repair/replacement of mild steel cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat & two coats of aluminium paint including dismantling from pole complete all as specified and directed.

Re-stretching/Re-stringing of existing over head line ACSR/copper conductor of LT/HT type on existing PCC/steel pole including 22 gauge aluminium binding wire, line connectors jumpers etc. including connections of incoming and outgoing cables, binding with spacers where required all as directed by Engineer-in-Charge. NOTE:- (a) For measurement purpose distance between centre of adjacent pole will be considered. (b) Contractors quoted rate is inclusive of rejointing of ACSR/Copper conductor if damaged during restraining.

Dismantling of ACSR conductors of any size from LT poles and removing from site.

M&L for ACSR conductor (Weasel conductor 6 x 2.59 + 1(Al) x 2.59 Steel), of any size drawn straight horizontal on over head lines on poles including binding with insulators using aluminium binding wire, jointing jumpers etc including connections of incoming and out going cables, including dismantling and taking down carefully existing old ACSR conductor/GI wire of any size from LT overhead line complete all as specified and directed. Note:- 3% for sag shall be added.

M&L for in repairs GI wire 4mm dia drawn straight horizontal as continuous earth wire on poles or fabrication of cradles complete all as specified and directed.

Dismantling insulators any type, any size and keeping serviceable insulators aside for reuse removing unserviceable insulators from site complete all as specified and directed.

S & F Pin type, polymer type, insulator including one galvanised mild steel spindle,two galvanised iron washers and one galvanised iron nut, 100mm height, 65mm dia for 1100 volts grade all as specified and directed.

S & F Shackle insulators porcelain, vitreous, white,brown or green insulator including one set of galvanised mild steel section of straps 31 x3 mm, dia of bolt 12mm alongwith iron washers and one galvanised iron nut, 75mm height, 95mm dia for 1100 volts grade all as specified and directed.

M&L for stay assembly comprising stay 14 mm dia and 40 cm long stay rod 20 mm dia and 1.8 m long threaded ends with nuts, mild steel plate 30 cm X 30 cm X 6 mm thick and two number of thimble etc. complete with accessories as shown in electrical plate No. 1 including taking down existing stay assembly complete all as specified and directed. Note:- Loop type insulator, stay clamps, excavation & earh work and concrete shall be measured and paid separately.

M&L for galvanized steel stay wire size 7/ 4.0 mm for stay of poles complete all as specified and directed.

M&L for loop type insulator vitreous, poecelain, white/brown/green, large size, with overall dimensions 90 x140 mm, clearance of hole 25.5 mm complete all as specified and directed.

M&L for repairing, servicing and maint of LT panels after removing all connections from LT panel having feeders (Total of incoming and outgoing), any capacity, indoor or outdoor type, for repairs/servicing, Cleaning properly all parts and removing dust, carbon deposits etc., removing unserviveable thimbles, if any, of connections, refixing serviceable items to the panel and replacing unserviceable parts with new and making all connections including testing for proper functioning of the panel as per standard engineering pactice and replacment of UNSV spare part including complete breakable accessories such as partialy open door, breakable door, unserviceable aluminium bus bar, indicator light and wiring of accesories, UNSV Ampmeter & UNSV Voltmeter, unserviceable locking arrangement as per existing part, repairing of LT Panel legs, welding work, neceassry PCC work, excavataion and earth work including disconnection and reconnection of cables, for any size any capacity LT Panel also fixing of LT Danger Notice plate both side of the Panel, complete all as directed. (Note:- Only Danger Notice Plate & AmpMeter & Voltmeter shall be measured and paid separately.)

Supply and spray " ROUND-UP" chemical around the sub station building or transformer area by spary Pump in dry days.

S & F in replacement of Danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with M.S. clamps, bolts and nuts of approved size, for LT, 20x15cm size complete all as specified and directed.

S & F in replacement of Multifunction digital panel meter suitable to display amps, volts, frequency etc - 01 No including CTs of appropriate ratio. Make- Schneider or equilent/L&T/Legrand

M&L for painting of LT panel after removing old dust particles, only portion by rubbing with sand paper and painting a coat of synthetic enamel paint with spray pump, and writing/digital printing, incomer location & outgoing Location, Capacity Descripton, date of installation, etc complete all as specified and directed.

M & L for Scraping of old paint from the steel tubular pole 9 mtr height with out removing accessories and preparation of surfaces for repainting. Repainting the pole with one coat of 30 cm alternative yellow and white strips of each upto 1.5 mtr height using synthetic enamel paint. Repainting the remaining pole and iron parts i.e. U clamps, channels etc above 1.5 mtr height by applying Two coat of aluminium paint, including writing letters or figures (Block, Roman) S/L Pole No. and Location code not exceeding 30 cm high, stop, commas, short lines, dashes, hypens, brackets etc. complete all as specified and directed.

M&L for painting of PCC pole 9 Mtr height without removing accessories with two coats of alternative yellow and white strips of 30cm each upto 1.5 Mtr height using synthetic enamell paint and marking of the pole number with black synthetic enamel paint over yellow circle of dia 100mm. Painting the steel parts i.e clamps, channels etc by applying two coats of alumn paint all as required at site, complete all as specified and directed by Engineer-in-Charge.

M&L for shifting of PCC /steel pole from one location to other location within 0.5/ 01 KM range after digging of earth and dismatling of PCC with the help of JCB or manually and removing other connected accessories carefully without damaging any parts like light of any capacity with bracket, cross arms, clamps, cable/ conductor (Overhead line/ underground line), insulators, Junction box, protection pipe etc. Refixed the pole with connected items in serviceable condition as directed by Engineer-in-Charge. Note:- Excavation and earth work, PCC foundation, PCC Coping shall be included in this item

Dismantling of PCC pole or steel pole, any type any size including demolition of concrete in foundation etc. and removing from site.

Supply and erecting "as in replacement" in true vertical position steel tubular swaged poles of 9.0 metres long, type 410 SP-31 9mtr complete with cast iron base plate, goose neck bracket, finial taper plug , bolt, nuts & screws as specified and painting internal surface with anti-corrosive paint and external surface painting up to 1.5 m height from base of poles with two coats of synthetic enamel paint Ist quality black & yellow colour alternate strip 30 cm wide over a coat of red oxide primer and remaing portion with two coats of aluminum paint over a coat of red oxide primer, including demolition of PCC, complete all as specified and directed. Note:-Excavation and earth work and concrete in foundation and pedestal shall be measured and paid for separately.

Supply and erecting in replacment of broken pole and disposed from site and fixing of new prestressed concrete pole, 9 m long, 102 mm x172 mm at top and 102 mm x 279 mm at bottom, class 10 including Zebra painting to PCC poles up to 1.5 m height from base of poles with two coats of synthetic enamel paint Ist quality black & yellow colour alternate strip 30 cm wide. Note:- Excavation and earth work and concrete in foundation and pedestal shall be measured and paid for separately.

S&F in replacement of old u/s service cable size 10 sqmm twin core multistranded fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire of 4mm dia or tape and overall PVC sheathed complete all as specified and directed.

S&F in replacement of old u/s service cable size 16 sqmm twin core multistranded fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire of 4mm dia or tape and overall PVC sheathed complete all as specified and directed.

Taking out old UNSV under ground LT XLPE/PVC cable of any size from trenches/ wall/ roof/ pipe/ DB including taking out of brick layer of cable protection complete all as specified and as directed by Engineer-in-Charge. Note : Excavation and earth work shall be measured seperately.

Excavation in Road/ floor cutting of size width 20 CM and depth 30 CM for inserting of GI pipe for protection of cable including making good the disturbed surfaces as existing surface.

Note :- An amount of Rs. 78,172.60 on account of credit schdule for Sch 'A' Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/s FAYAZ AHMAD BHAT C/O ZAHOOR AHMAD DAR (BID ID -3140409)

M/S A Q ENTERPRISES (BID ID -3140285)

M/S CLASSIC JK SUPPLIERS (BID ID -3139965)

ms new dar water star (BID ID -3140083)