DEPOSIT WORKS AT VARIOUS 33 KV SUB STATIONS IN THE AREA OF SDO I MEDICAL UNDER EDD IV MEERUT

Amount

Cartage of following material from store center Meerut to JE Store including loading & unloading at both ends maximum distance up to 40 Km. :-

PCC Pole 8.5 Mtr Long

STP Pole 11 Mtr. Long.

Line material such as 11 KV Cross arms 11 KV pin, 11 KV pin insulator, 11 KV Disc, Stay rod, Stay wire ACSR weasel conductor, GI Wire, MS angle iron & MS Channel, TPMO, Fuse set etc.

Cartage of following material from JE, Store to site of work including loading & unloading at both ends maximum distance up to 40 Km. :-

PCC Pole 8.5 Mtr Long

STP Pole 11 Mtr. Long.

Cartage of 25 KVA T/F from Center Store Meerut to Site Including and loading of T/F

Cartage of 63 KVA T/F from Center Store Meerut to Site Including and loading of T/F

Line material such as 11 KV Cross arms 11 KV pin, 11 KV pin insulator, 11 KV Disc, Stay rod, Stay wire ACSR weasel conductor, GI Wire, MS angle iron & MS Channel, TPMO, Fuse set etc.

Erection of PCC Pole 8.5 mtr long/STP Pole 11 mtr long after digging a pit of Size 1.6 mtr deep in all type of Soil including back filling of the Pole with proper ramming after completion of work.

Fabrication and fixing of all 11 KV HT/LT line Accessories.

Erection of double pole on PCC pole 8.5 mtr. After digging a pit of size 1.6 mtr. Deep in all type of soil for each pole including back filling of the pole with proper ramming after completion of work

Fabrication and fixing of MS angle and MS channel, fixing all 11 KV accessories, Fuset set 11 KV pin insulators on D/P Pole.

Mounting of 25/63 KVA T/F with proper jumpering of HT side and fixing of cable on LT side of T/F.

Making a section pole to exist pole after fabrication and fixing of T channel fixing of all 11 KV accessories

Erection of stay rod complete after digging a pit of size 1.6 mtr deep and grouting the same in block of size 0.60 x 0.60 x 0.30 mtr and nuzzling at the both ends

Laying lifting stringing & proper sagging of ACSR weasel conductor for 3 phase, 3 wire 11 KV line including binding & jumpering properly.

Laying of ACSR Weasel cable of various size including fixing of all ACSR Weasal on support

Laying of XLPE AB Cable of various size including fixing of LT accessories on support

Fixing of Distribution box including fixing the cable from transformar and consumer service cable

Earthing of each 11 KV line pole & T/F properly after drive of electrodes if size 20mm x 250 mm and connection the earthing point with GI wire.

Grouting of PCC pole 8.5 mtr.//STP Pole 11 mtr. With 106 mtr deep and Grouting of Stay Here with

Guarding of Line with G.I wire having 2 no. horizontal wire & 3 mtr distance of SWG G.I wire after fabrication of guard cross arms of & fixing the same in supports.

Providing and fixing MS Nt Bolt, J hook, Holding Clamp, Danger Board, Dead and Clamp, Piercing Clamo, Box Clamp

Cutting & chopping tree branches near side of line for making the clearance between line and tree.

BHARDWAJ ENTERPRISES