PROVN OF AMF PANELS, AIR CONDITIONERS, POWER SUPPLY WITH ASSOCIATED WORKS, STABILIZED ELECTRIC SUPPLY AND SPECIAL REPAIR / REPLACEMENT OF INTERNAL WIRING AND ASSOCIATED WORKS (05 JOBS) AT ATS BELAGAVI

Amount

Supply, fixing and commissioning of CPRI Approved AMF panel of IP 65 rating for existing DG set of Capacity 62.5 KVA made from CRCA sheet 3.15.mm thick outdoor pedestal type supported on MS iron channel 75mm x 40mm, totally enclosed with front and rear opening, hinged doors with projected a raised platform of suitable size weather and water proof with necessary locking arrangements along with lugs, cable glands of various sizes for cables, danger notice plate, stickering of switcher gear about termination of switch gear, and the nuts/ bolts etc used are to be made of rust proof material incl as per IS: 8623 copper bus bars with insulators suitable for three phase and four wire LT AC, 50 Hz 415 V 200 A Capacity complete and powder coating, necessary internal electric connection as required and provision of the following: -

Supply , install, testing and commissioning of LT feeder pillar box AC 415 V , 50 HZ 3 Phase 4 wire of suitable size for accomodating the following accessories totally enclosed self supporting structure / cubicle , fully compartmentalized type , suitable for outdoor use , with bottom cable entry with suitable cable glands structure made out of 3.15 mm thick CRCA steel sheet with angle iron frame work and legs of ISA 50X50X5 mm , with four legs grouted to PCC (1:2:4) type B1 , foundation block with suitable mounting arrangement for bus bars voltmeter, ammeter , changeover switch and MCCBs , hinged doors at front with suitable locking arrangement , Provision of louvers at sides , structure treated under 8 - tank metal treatment process and duly powder coated , complete all as specified and directed:- Loc - Lal & Latif Class Room Subroto Class Room

BUSBAR :- (i) Aluminium bus bar 200 Amps , supported on non hygroscopic fibres and brass screws for mounting -4 Nos

INCOMER (a) MCCB 100A, 25 kA, AC 3 Phase, 4Pole, 415 V, 50Hz, adjustable thermal and fixed magnetic confirming to IS/IEC: 60947-2, including rotary handle, spreader links etc (ICS=ICU 75%) - 01 No.

Supply, fixing and commissioning of CPRI Approved AMF panel of IP 65 rating for existing DG set of Capacity 50 KVA made from CRCA sheet 3.15.mm thick Outdoor pedestal type supported on MS iron channel 75 x 40mm, totally enclosed with front and rear opening, hinged doors with projected a raised platform of suitable size weather and water proof with necessary locking arrangements along with lugs, cable glands of various sizes for cables, danger notice plate, stickering of switcher gear about termination of switch gear, and the nuts/ bolts etc used are to be made of rust proof material incl as per IS: 8623 copper bus bars with insulators suitable for three phase and four wire LT AC, 50 Hz 415 V 200 A Capacity complete and powder coating, necessary internal electric connection as required and provision of the following: -

Supply , install, testing and commissioning of LT feeder pillar box AC 415 V , 50 HZ 3 Phase 4 wire of suitable size for accomodating the following accessories totally enclosed self supporting structure / cubicle , fully compartmentalized type , suitable for outdoor use , with bottom cable entry with suitable cable glands structure made out of 3.15 mm thick CRCA steel sheet with angle iron frame work and legs of ISA 50X50X5 mm , with four legs grouted to PCC (1:2:4) type B1 , foundation block with suitable mounting arrangement for bus bars voltmeter, ammeter , changeover switch and MCCBs , hinged doors at front with suitable locking arrangement , provision of louvers at sides , structure treated under 8 - tank metal treatment process and duly powder coated , complete all as specified and directed:-

BUSBAR :- (i) Aluminium bus bar 200 Amps , supported on non hygroscopic fibres and brass screws for mounting -4 Nos

INCOMER (a) MCCB 63A, 25 kA, AC 3 Phase, 4Pole, 415 V, 50Hz, adjustable thermal and fixed magnetic confirming to IS/IEC: 60947-2, including rotary handle, spreader links etc (ICS=ICU 75%) - 01 No.

Supply, fixing and commissioning of CPRI Approved AMF panel of IP 65 rating for exiting DG set of Capacity 15 KVA made from CRCA sheet 3.15.mm thick Outdoor pedestal type supported on MS iron channel 75 x 40mm, totally enclosed with front and rear opening, hinged doors with projected a raised platform of suitable size weather and water proof with necessary locking arrangements along with lugs, cable glands of various sizes for cables, danger notice plate, stickering of switcher gear about termination of switch gear, and the nuts/ bolts etc used are to be made of rust proof material incl as per IS: 8623 copper bus bars with insulators suitable for three phase and four wire LT AC, 50 Hz 415 V 200 A Capacity complete and powder coating, necessary internal electric connection as required and provision of the following: -

Supply , install, testing and commissioning of LT feeder pillar box AC 415 V , 50 HZ 3 Phase 4 wire of suitable size for accomodating the following accessories totally enclosed self supporting structure / cubicle , fully compartmentalized type , suitable for outdoor use , with bottom cable entry with suitable cable glands structure made out of 3.15 mm thick CRCA steel sheet with angle iron frame work and legs of ISA 50X50X5 mm , with four legs grouted to PCC (1:2:4) type B1 , foundation block with suitable mounting arrangement for bus bars voltmeter, ammeter , changeover switch and MCCBs , hinged doors at front with suitable locking arrangement , 9rovision of louvers at sides , structure treated under 8 - tank metal treatment process and duly powder coated , complete all as specified and directed:-

BUSBAR :- (i) Aluminium bus bar 200 Amps , supported on non hygroscopic fibres and brass screws for mounting -4 Nos

INCOMER (a) MCCB 100A, 25 kA, AC 3 Phase, 4Pole, 415 V, 50Hz, adjustable thermal and fixed magnetic confirming to IS/IEC: 60947-2, including rotary handle, spreader links etc (ICS=ICU 75%) - 01 No.

Supplying, laying and testing cable XLPE Insulated screened PVC bedded,galvanised steel strip or wire armoured,electric power cables(heavy duty) with stranded aluminium conductor, 1100 volts grade of size 4 core 25 Sqmm complete all as specified and directed

M&L for earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not le. than 1.5 m below normal ground level connected to Galvanized Strip 32x6mm by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia 150mm long reinforcement, watering funnel, 15 mm dia light grade pipe for protection of earth electrode 20 mm dia funnel for watering all as specified and directed and tested on completion

Supply, installation, fixing and commissioning of tower AC ype air conditioner of capacity 3TR, BEE & minimum 5 star rated, LCD display on unit ,with cordless remote control unit and inbuilt air ioniser, plasma filter for better indoor air quality, Noise level indoor 61db, antibactrial function, suitable for floor mounted three phase 415 volt 50 Hz all as required complete all as specified and directed. Make:-Daikin/Voltas/Carrier

Supply, laying, testing and connecting of cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 Volts grade, cross sectional area 185 Sqmm 3.5 core cable complete all as specified and directed

Supply, laying, testing and connecting of cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 Volts grade, cross sectional area 16 Sqmm 4 core cable complete all as specified and directed

Excavation in trenches, not exceeding 1.50m wide and not exeeding 1.50m in depth for foundations, trenches of cable or pipe lines etc or and getting out in hard/dense soil complete all as specified and as directed.

M&L for cutting the tar macadam road / hard standings for laying cable and excavating not exe. 60cm wide and n. exc 75cm depth and getting out all as directed including filing back, consolidating etc complete and finishing it with 200mm thick, PCC 1:4:8 type D-2 (using 40mm graded stone aggregatesd) complete all as specified and directed

S & F galvanised iron pipes 80mm bore, light grade, with all fitting and fixed complete to poles/route/drains etc and ceillings or laid in floors complete all as specified and directed

S & F galvanised iron pipes 40mm bore, light grade, with all fitting and fixed complete to poles/route/drains etc and ceillings or laid in floors complete all as specified and directed

S & F double wall corrugated HDPE Pipe IS-16205, outer dia 90 mm for cable protection in wall/under gorund laying of UG cables including SNAP-FIT coupler and all fittings as required at site complete all as specified and as directed

S & F double wall corrugated HDPE Pipe IS-16205, outer dia 50 mm for cable protection in wall/under gorund laying of UG cables including SNAP-FIT coupler and all fittings as required at site complete all as specified and as directed

Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in soil complete all specified and as directed.

Removing excavated materials /soil to a distance not exceeding 50 meters and depositing where directed at a level not exceeding 1.5 meters above the starting point complete all specified and as directed.

M & L for LT Cable route indicator with a welded/riveted disc of 4 inch dia and engraved with cable with cable route marker made out of angle iron 40 x 40 x4 mm thick dug in ground with in and incl PCC 1:3:6 type C1 using 20mm graded aggregate at approx distance 100 mtr including necessary earth work complete all as specified and directed

S & F Aluminum conductor, steel reinforced ( ACSR ) drawn / fixed on poles including aluminum binding wire for jumpering including dismantling of old ACSR conductor complete all as specified and directed

S & F Pin type porcelin vitreous white brown or green insulator including one galvanised steel spindle two galvanised washers and GI nut bolt 100 mm height for 1100 volts grade LT complete all as specified and directed

Supply, fixing, testing and commissioning of 30 KVA Voltage Servo Stabilizer for unbalanced load automatic operation, Three phase, 50Hz naturally Oil Cooled, Copper Wound, Indoor Type & Designed for Input Variation between 360 V to 480 V with output stabilized at 415 V with accuracy +/- 2.5% and speed of correction 8 volts per seconds and control switches including area leveling wwith PCC Foundation near ground level to 20 cm height complete all as specified and as directed

M&L for DWC Pipe IS-16205, size inner dia 32 mm, outer dia 40 mm for cable protection in wall/under gorund laying of UG cables including SNAP-FIT Coupler and all fittings as required at site complete all as specified and directed

S&F MCCB DB VTPN 6 way double door 415 V AC 50Hz with for MCCB FP as incomer and TP,SP MCBs as out going with integrated door earhting system, tinned copper bus bar ,neutral link, earth link complete all as specified and directed .

S&F MCCB FP 40 Amps, 415 volts, 10 KA 50 HZ with adjustable thermal and magnetic setting complete all as specified and directed

S&F MCB TP 6 to 32 Amps 415 volts 10 KA 50 HZ, C curve,Integrated level holder,colour coded on/off indication complete all as specified and directed

S&F three pole and neutral enclosure with a three pin and earth plug and socket complete with one single pole MCB of 20 Amp 415 V complete all as specified and directed

Supply , install, testing and commissioning of LT feeder pillar box AC 415 V , 50 HZ 3 Phase 4 wire of suitable size for accomodating the following accessories totally enclosed self supporting structure / cubicle , fully compartmentalized type , suitable for outdoor use , with bottom cable entry with suitable cable glands structure made out of 3.15 mm thick CRCA steel sheet with angle iron frame work and legs of ISA 50X50X5 mm , with four legs grouted to PCC (1:2:4) type B1 , foundation block with suitable mounting arrangement for bus bars voltmeter, ammeter , changeover switch and MCCBs , hinged doors at front with suitable locking arrangement , Provision of louvers at sides , structure treated under 8 - tank metal treatment process and duly powder coated , complete all as specified and directed

BUSBAR :- (i) Aluminium bus bar 200 Amps , supported on non hygroscopic fibres and brass screws for mounting -4 Nos

INCOMER (a) Supply and fixing MCCB of 4 pole of capacity 100 amps with breaking capacity of 25 KA fixed thermal and fixed magnetic setting - 01 No.

Taking down old point wiring for light / fan /socket point of any type from the walls ceiling and making good the disturbed surfaces complete all as specified and directed

M&L for point wiring for one light/fan point controlled by one switch with two runs of single core 1.5 Sq.mm. (Nominal area) PVC insulated unsheathed multistranded copper conductor cable confirming to IS drawn through and including non metallic PVC conduit concealed/semi concealed including Flush type metal GI boxes for fixing modular type switches, sockets, regulators etc. including provision of multistranded 1.5 Sq.mm. copper conductor as earth wire connected to common earth dolly and earth in distribution board including cutting of stone masonary/ wall complete all as specified and directed

All as per Srl item No 31 here in with but for one 5 Amps socket independent including 1.5 Sqmm earth continuty FRLS copper Cable -ditto-

All as per Srl item No 31 here in with but with 2.5 Sqmm FRLS copper cable for one 15 Amps power point.Including 2.5 Sq mm FRLS copper conductor cable for earth continuity conductor and connecting it to earth point -ditto-

All as per Srl item No 31 here in with but with 4 Sqmm FRLS copper cable for one AC point.Including 4 Sq mm FRLS copper conductor cable for earth continuity conductor and connecting it to earth point -ditto-

S & F switch Modular type single pole 6 Amps One Way AC 230V, 50HZ complete all as specified and directed

S&F Celing rose surface backlite 63 mm dia two to three terminals complete all as specified and directed

S & F modular type socket 5A AC 230V, 50HZ complete all as specified and directed

S & F modular type switch socket combine 6A/16A multi purpose AC 230V, 50HZ complete all as specified and directed

S&F modular Fan step regulator, 120W - 2 module complete all as specified and directed

S& F modular white cover plate with frame 3 module complete all as specified and directed

S& F modular white cover plate with frame 6 module complete all as specified and directed

S& F modular white cover plate with frame 8 module complete all as specified and directed

S&F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed

M&L for sub main wiring with 2runs of 10 Sqmm PVC insulated FRLS Copper conductor cable including PVC conduit of Suitable dia along with one run of 10 Sq.mm FRLS copper cable for earth continuity conductor as earth lead for sub main wiring and connecting to common earth dolly including takingdown old exisitng submain wiring complete all as specified and directed.

M&L for sub main wiring with 2runs of 6 Sqmm PVC insulated FRLS Copper conductor cable including PVC conduit of Suitable dia along with one run of 6 Sq.mm FRLS copper cable for earth continuity conductor as earth lead for sub main wiring and connecting to common earth dolly including takingdown old exisitng submain wiring complete all as specified and directed.

M&L for sub main wiring with 2runs of 2.5 Sqmm PVC insulated FR Copper conductor cable including PVC conduit of Suitable dia along with one run of 2.5 Sq.mm FR copper cable for earth continuity conductor as earth lead for sub main wiring and connecting to common earth dolly including takingdown old exisitng submain wiring complete all as specified and directed.

S&F in replacement SPN DB 8 Way with 200 amps rated bus bar Double Door complete all as specified and directed

S&F in replacement SPN DB 4 Way with 200 amps rated bus bar Double Door complete all as specified and directed

S&F amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN and current carrying capacity 40 Amps in the MCB DB complete with connection testing and commissioning complete all as specified and directed

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN and current carrying capacity 32 Amps in the MCB DB complete with connection testing and commissioning.

S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

S&F 240v rated Sheet metal enclosure with socket plug top Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps complete all as specified and directed

S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, Sweep Size 1200 mm, Low Power consumption 52W, Speed 390 RPM, Air Delivery 210 CMM complete all as specified and directed

S&F in replacement LED light fitting 600mm x 600mm (2' x 2' ) , 36watts, 220volt AC, slim design, LED recessed type to be fitted in ceiling complete all as specified and directed.

S&F in replacement LED recessed down light fitting 300mm x 300mm, 18 watts, 220volt AC, slim design, polycarbonate housing with superior light output and internal driver efficacy 100 lumen/watt complete all as specified and directed

S&F exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed

S&F in replacement LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed

RAJENDRA KRISHNA SARAF (BID ID -3145086)

M/s ASPIRE ENGINEERING ENTERPRISES (BID ID -3151993)