Vikas Khand Nathnagar khajuriya raja nahar se badarwa prahlad nav ke ghar tak interlocking road nirman karya

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201.

Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5

Loosening of the ground upto a level of 300 mm below the subgrade level, watered, graded and compacted in layers to meet requirement of Tables 300.1 and 300.2 for subgrade construction as per Technical Specification Clause 303.5.2.

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1.

Excavationof Foundation in odinary soil including lift 1.5 cm lead 3 cm removal and disposal of surphid earth as directed by E/L As per SI No. 251

Cement Concrete with 40 mm Gauge approved stone Ballast, approved coarse sand and cement in proportion 6:3:1 in including supply of all materils labour and tools plants etc. required for proper complition for the work.. As per SI NO. 280

Class M 150 sub class ''A'' Brick in 1:4 with cement and coarse sand in foundation upto bed level required for proper completion of work. As per SI. NO. 305B

Plain cement in 1:2:4 with cement coarse sand 20 mm stone grit in wearing coat and grit in wearing coat and copling of Parapets As per Si. No. 279A

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavater at OMC, and compacting with smooth wheeled roller to achieve the desired density as per clause 401(GSB Grade I)

Providing, laying, spreading and compacting stone aggregates of specific sizes (53-22.4 mm) to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405. (WBM III)