REPAIR TO BOUNDARY WALL, FENCING, DRAINS, GARBAGE BINS, CULVERTS, KERB STONES, HARDSTANDING ETC UNDER AREA OF AGE B/R-I AT ITARANA, CANTT ALWAR

Amount

Dismantling of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles.

M&L brick work with old size fly ash ’ bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

All as per serial item No 2.00 here-in-before but except bricks. Note : Old serviceable bricks retrieved from serial Item No. 1.00 here-in-before shall be re-used under this item.

M&L walling of random rubble, uncoursed, well bonded, bedded and solidly hearted stone masonry built in cement mortar 1:4 complete all as specified & as directed.

All as per serial item No. 4.00 here-in-before but except stones. Note : Old serviceable stones retrieved from serial item No. 1.00 here-in-before shall be re-used under this item.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15cm thick (below or above ground level) complete all as specified and directed .

Demolition of reinforcement cement concrete of any description and in any position (reinforcement cut as required to facilitte demolition) all as specified and as directed.

M&L PCC 1:4:8 type D2 using 40 mm graded crushed stone aggregate in foundations, filling and mass concrete.

M&L PCC 1:2:4 type B1 using 20mm graded stone aggragate as in coping/bed blocks, bed plates etc including weathering slightly rounded or chamfered angles and throating making groves for fixing of man hole cover including necessary form work.

S&F precast cement concrete louvres and jallies, 25mm thick, type B0 (1:2:4) using (12.5mm aggregate ) including all mouldings but excluding frame (measured solid), set in cement mortar 1:6.

M&L 75mm thick cement concrete (1:3:6) type C1 using 20 mm thick graded stone aggregate as in plinth protection laid in alternate bays n exc 2.5m length finished even & smooth and joint to be filled with Bituminous mastic filling including necessary form work complete all as specified and directed.

M&L precast RCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as in landings, cover slabs (for man holes, drains etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including placing in position and set in CM (1:6) complete all as specified & as directed. Note :- Reinforcement shall be measured and paid for separately.

M&L cement concrete (1:3:6) type C2 using 40 mm graded crushed stone aggregate as in surface channels and drains and benching including finishing the top of benching even and smooth using extra cement. Note : Forming fair finished channel for drain using extra cement shall be measured and paid for separately.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc.

M&L reinforcement TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified.

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc all as directed.

M&L rendering 15mm thick in cement mortar 1:4 on brick/ stone masonry surfaces or surfaces of brick/Stone work of walls, finishing the surface even & smooth without using extra cement complete all as specified.

M&L washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement : 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified.

M&L preparing new plastered surfaces of walls and applying two coats of cement paint over a coat of water primer complete as specified and directed.

Demolition and breaking up 150mm bore drain pipes, salt glazed stone ware set in cement mortar including PCC haunching and bedding, complete.

Demolition and breaking up 200mm bore drain pipes, salt glazed stone ware set in cement mortar including PCC haunching and bedding, complete.

M&L for 150mm bore reinforced concrete pipe, class NP2, laid and jointed (in CM 1:1) complete with collars all as specified & as directed.

M&L for 200mm bore reinforced concrete pipe, class NP2, laid and jointed (in CM 1:1) complete with collars all as specified & as directed.

Demolition and breaking up 450mm bore drain pipes, salt glazed stone ware set in cement mortar including PCC haunching and bedding, complete.

M&L 450mm bore reinforced concrete pipe, class NP2, laid and jointed (in CM 1:1) complete with collars all as specified & as directed.

M&L PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate concrete bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested for 150 mm bore pipe all as specified and as directed.

M&L PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate Concrete bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested for 200 mm bore pipe all as specified and as directed.

M&L PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate Concrete bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested for 450 mm bore pipe all as specified and as directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints / solvent cement joints laid in trenches or in floors complete all as specified including dismantling of PCC & taking out old unserviceable 110mm bore PVC pipe with fittings & making good disturbed area complete all as specified & directed.

S&F 50mm thick steel fibre reinforced (SFRC) man hole cover with iron frames (medium) complying to the standard specifications as mentioned in the IS 12592 BIS Standard minimum load bearing capacity 5 ton/Sqm in square, rectangular or circular shape complete all as specified & as directed.

M&L cement concrete 75mm thick 1:2:4 type B-2 using 40mm graded stone aggregate as in pathways/hardstanding laid in alternate ways, each panel not exceeding 3.00 Sqm finished the surface even and fair without using extra cement and joint to be filled with Bituminous mastic filling including necessary form work complete all as specified & directed.

M&L cement concrete 100mm thick 1:2:4 type B-2 using 40mm graded stone aggregate as in pathways/ hardstanding /berms etc, laid in alternate ways, each panel not exceeding 3.00 Sqm finished the surface even and fair without using extra cement and joint to be filled with Bituminous mastic filling including necessary form work complete all as specified & directed.

Forming construction joint 30mm deep x 10mm wide filled with sealing compound, Grade ‘A’.

M&L cement concrete 50mm thick 1:4:8 type D-2 using 20mm graded stone aggregate as in sub base of floor fcomplete all as specified & directed.

M&L cement concrete 75mm thick 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base of floor fcomplete all as specified & directed.

Dismantling of stone slabs or tiles of any description or thickness as in floors, pavings, aprons, pathway etc laid dry or laid dry and pointed complete all as specified & directed.

M&L rubber moulded concrete colour tiles with grey cement pigment of size 300mm x 300mm x 22-25mm thick laid over anwith d including 20 mm thick cement mortar screed in CM 1:6 as in floors complete all as specified and directed.

M&L machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 grade with grey cement and no pigment laid over sand cushing complete all specified and directed. Note :- Sand cushioning will measured and paid seperately.

M&L machine pressed precast concrete coloured interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment laid over sand cushing complete all as specified & directed. Note :- Sand cushioning will measured and paid seperately.

All as per item No 39.00 herein before but except tiles (old tiles to be re-used).

M&L machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and no pigment laid over sand cushing complete all as specified & directed. Note :- Sand cushioning will measured and paid seperately.

All as per item No 41.00 herein before but except tiles (old tiles to be re-used).

Supply and laying of sand including spreading, levelling and ramming in layers n.exc. 25 cm thick in each layer complete all as directed.

M&L machine cut kota stone slab flooring 20 to 25mm thick size not less than 22" x 22" laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over with and including 20mm thick cement screed bed in cement mortar 1:6 including rubbing and mirror polishing complete all as specified and as directed.

M&L kota stone slab 20 to 25mm thick in riser of steps, skirting, dado and pillars laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over with and including 10mm thick rendering in cement mortar 1:4 including cutting, moulding outer edges, rubbing and mirror polishing complete all as specified and as directed.

M&L pre-cast (Factory casted) cement concrete Kerb stone casted in PCC (1:2:4) Type B-1 using 20mm graded stone aggregates with plan or interlocking joints (as directed) with solid blocks, exc. 10 cm in width and setting and jointed in cement mortar 1:6, complete all as specified & directed.

All as per item No 46.00 herein before but except cement concrete Kerb stone (old stone to be re-used) set in CM 1:4.

M&L preparation of kerb stone, new un-treated concrete or plastered surfaces of any description over 10cm girth or width, not otherwise described and applying two coats of synthetic enamel paint in black and white colour over a coat of primer complete all as specified and directed.

M&L preparation of kerb stone,old painted concrete surfaces or plastered surfaces of any description over 10cm girth or width, not otherwise described and applying one coat of synthetic enamel paint in black and white colour complete all as specified and directed.

M&L taking down and removal of loose/ditegrated old concrete plaster and applying 3mm thick bonding coat of modified styrene butadiene emulsion (SBR Bonding agent i.e Nitobond SBR 45) in proportion 1 (Nitobond SBR 45) : 1(Water) : 3 (OPC) by volume with the brushes etc to bind New cement plaster/polymer Modified Plaster/concrete /Screed concrete with old surface etc complete.

M&L applying 15 mm thick plaster with polymer modified mortrar fortified with SBR (Nitobond SBR 45) in porpotion 1:3 by weight 5 Litres Nit bond SBR 45 to added to 50 Kg cement with 13 Litre water addition, finished surface to match with existing adjoining surface of ceiling, beams and like complete.

M&L rendering 20mm thick polymer cement mortar 1:3 prepared with latex SBR by the weight of cement concrete surface incl. Finishing the surface even and smooth without using extra cement. Make Liquid of M/S choksey/STP/Sika/Pidilite as approved by GE. Note:- Exact qty and application process of chemical is strictly as per manufature,s guidelines

M&L waterproofing treatment by the ater proofing liquid of Tech force 2K strong of choksey od equivalent of Dr Fixit/Fosroc fter proper cleaning f the new surface free of dust and applying the first coat (By brush nly) @4-4.5 Sqm/Lit, allowing it to dry for 24 hrs and applying the second coat over it on horizontal and vertical surface all as specified and directed. Note:- Application shall be carried out through authorised applicator of manufactureer only and as per guidlines of manufacturere strictly. Each stage shall be passed by the Engr-in-Charge/GE before laying further coat. Note:-Sunshield 100 of M/S Choksey or fosroc /ST/ Pidilite /Sika as approved by GE.

Dismantling fencing wire mesh,any type including Mild steel bars, flat iron, nuts & bolts etc complete all as specifeid and directed.

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion in natural ground and making good disturbed ground. Complete all as specified and directed.

M&L cement concrete type C-2, 1:3:6 using 40MM graded stone aggregate as in foundation filling and mass concrete in fixing of fencing post including necessary form work if required at site complete all as specified and directed.

S&F fencing post/hand rails, half round or other stock section including embeding in concrete and screwing etc. wind ties for roof including securing bolt posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165.

S&F mild steel screw bolts (Machine made) with hexagonal or square heads at one end and the screwed the other to be fitted with washers and one hexagonal or square but exc 5 cm but n.exc 10 cm long, dia of shank 5 to 10mm.

Supply only Chain link MS galvanised fencing, any size or type complete all as specified and approved by GE.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire complete all specified and directed.

M&L for mild steel round bars of 10 mm dia and over conforming to Grade E-165 (Fe 290) as in handles of man hole covers & similar works including necessary cutting etc and fixing in position complete all as specified & directed.

S&F in repairs galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

M&L for treating ends of posts, backs of chowkhats, etc., area tarred exc. 0.1 Sqm but n.exc 0.5 Sqm each complete all as specified and directed.

M&L preparing new plastered surfaces of walls and applying two coats of cement paint over a coat of water primer complete as specified and directed.

M&L for preparing new steel surfaces of any description width or girth exc 10 cm applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified.

All as per item No 65.00 above but n.exc 10 cm width or girth.

GAR CONSTRUCTIONS

M/s ASK Enterprises

M/s R P Enterprises

shiva construction

J.J.ENGINEERING

M/s KUNTAL ASSOCIATES