Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹2.0 L
Closing Date
19 Jan 2026, 2:30 pmClosed
Single Packet
Normal Tender
No
Not Applicable
Itemwise
Lowest to Highest
TPI Agency
Not Applicable
120 days
Expenditure
General
97
5 conditions · 5 needing a document upload
Bidders to provide OEM`s BIS CM/L License No. and corresponding documents Conforming to IS 1180 (Part 1) along with bid. Failing which offer may not be considered.
Bidder to provide detailed product sheet and specification sheet of the offer. Failing which offer may not be considered.
The tenderer shall, in their offer, submit performance certificate of atleast 01 number of same machine(which are counted for the purpose of clause above) or similar item (Similar item means transformer of 200 KVA or higher)supplied in the last 5 years and the machine covered by these certificates must have worked satisfactorily for at least one year from the date of commissioning as on the original date of closing of tender. The performance certificate submitted by the tenderer shall have been issued by the actualend user organization of the machine, with their clear signature and address therein, in whose premises the machine is installed and commissioned. Performance certificates should be as per Annexure-A1
Bidder has to upload Tender specific authorization from OEM for supply and after sales service and warranty support. If OEM is the bidder, self declaration certificate for the same to be provided along with bid. Failing which offer wont be considered
Clause wise compliance of detailed specificaition attached in tender to be provided by the bidder.Failing which offer wont be considered.
36 conditions · 4 needing a document upload
For delivery period extensions or any amendments request for Purchase order please mail to [email protected]
During warranty period, the supplier or his authorized agent shall attend for break down as soon as possible, but in no case later than 72 hours of receipt of intimation of the breakdown. (b) Maximum down time during the warranty period will be 2%. (c) A penalty of @1/2% (half percent) of the price of the store (including elements of taxes, duties, freight, etc) per week or part of the week will be levied for delay in response time for attending and rectification of faults beyond specified time of 72 hours during the warranty period. (d) Maximum penalty to be levied on account of warranty failure will be 10% of the contract value calculated during whole of the warranty period and after that if there is any delay on the part of the supply, purchaser shall be entitled for encashment of WG bonds or from other bills. In such cases ,the bad performance of the firm during the warranty period, the same should be recorded and circulated to all Railways. The same should be given due regards in deciding future orders on the firm and when evidence to the contrary is not available, the firm offer may be even rejected.
Performance Guarantee for the warranty obligations, of 10% of the contract value to be submitted at time of supply valid for 6 months beyond the free warranty period. The consignee officials to ensure that the Performance Guarantee is received and given to purchase office before releasing CRN
[a] Please indicate whether you are registered with any of the following Micro & Small Enterprises (MSE) agencies : District industries Centre[s,KVIC, KVIB, Coir Board, NSIC, Directorate of Handicraft & Handloom or any other body specified by Ministry of MSME.[Name the agency clearly]. If yes, then for availing benefits under MSME Act, should upload valid documents maintained under MSME Act such as NSIC Certificate etc duly marking the tendered item in the certificate. Otherwise, claim for benefits under MSME Act may not be entertained and also indicate whether the Enterprise is owned by SC/ST/Woman. Please upload support of this. [b] If you are not a MSE or a consortia of MSEs formed by NSIC, please indicate percentage of sub contracts in execution of this tender that will be from Micro and Small Enterprises. [in percent of order value] with further breakup of MSE owned by SC/ST[Information will be provided in percentage terms with 6 fields; Micro owned by SC, ST, Others and Small Industries owned by SC, ST and Others]. Please refer para 15.0 Part B of tender conditions.
HSN CODE [a] All the bidders/tenderers should ensure that they are GST compliant and their quoted tax structure/rates are as per the GST Law. Firms must indicate its GST registration number along with their offer. [b] In case the successful tenderer is not liable to be registered under CGST/IGST/UTGST/SGST Act, The Railway shall deduct the applicable GST from his/their bills under Reverse Charge Mechanism (RCM) anddeposit the same to the concerned tax authority. [c] The firm should indicate the tariff code (HSN Code) for claiming GST for the tendered item. [d] The offer shall be evaluated based on the GST rate as quoted by each bidder and same will be used for determining the inter-se ranking. While submitting offer, it shall be the responsibility of the bidder to ensure that they quote correct GST rate and HSN number. [e] It shall be the responsibility of the bidders to quote correct HSN number and corresponding GST rate. The Purchaser shall not be responsible for any misclassification of HSN number or incorrect GST rate, if quoted by the bidder. [f] Wherever, the successful bidder invoices the goods at GST rate or HSN number which is different from that incorporated in the Purchase order, payment shall be made as per GST rate which is lower of the GST rate incorporated in the Purchase order or billed. [g] Vendor is informed that she/he would be required to adjust her/his basic price to the extent required by higher tax bill as per invoice to match the All inclusive Price as mentioned in the Purchase order. [h] Any amendment to GST rate or HSN number in the contract shall be as per the contractual conditions and statutory amendments in the quoted GST rate and HSN number, under SVC.
Railway is not bound to accept/Cancel the lowest or any tender or assign any reason for doing so and Railway reserves the right to accept/Cancel any tender in respect of the Whole or any portion of the items specified in the Schedule annexed (a or Tender Schedule) and the contractor shall be required to supply the same at the rate quoted
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
DELIVERY TERMS: F.O.R. DESTINATION BY ROAD AT CONSIGNEE END.
The Guarantee/Warranty of the item mentioned in the tender is only indicative, the actual Guarantee/Warranty is applicable as per the product specification.
The Inspection clause mentioned in the tender is only indicative, the actual inspection clause is applicable as per the product specification and drawing.
Make in India Preference Policy Please refer para 16.0 Part B of Southern Railway tender conditions uploaded in IREPS.
HSN CODE :Tenderers should mention the HSN CODE of the item and Rate of GST applicable. Firm's GST NO. and Firm's Banker details viz., Name & Address of the Bank Account No.., IFSC Code. and MICR No. in their E-Bid.
For inclusion in this tender, please mail your request to [email protected] with proof of successful performance and certificate.
Purchaser shall have the right to levy general damages on the supplier for failing to comply with the contractual conditions, not by way of penalty, an amount equal to 5% of the value of cancelled quantity.
Bidder shall confirm to the following declaration [Land Border condition "I have read the clause regarding restrictions on procurement from a bidder of a country which shares a land border with India. I certify that this bidder is not from such a country or , if from such a country, has been registered with the Competent Authority. I hereby certify that this bidder, fulfills all requirements in this regard, and is eligible to be considered. (Where applicable, evidence of valid registration by the Competent Authority shall be attached.)' along with bid for compliance of Office Memorandum of Department of Expenditure, Ministry of Finance dated 23.07.2020. If such certificate given by a bidder whose bid is accepted is found to be false, this would be a ground for immediate termination and further legal action in accordance with law. In case of non- submission of the above said certificate by a bidder, such bidder's bid is liable to be ignored." Format attached in the tender documents
EARNEST MONEY DEPOSIT : EARNEST MONEY DEPOSIT (EMD) : EMD shall be deposited by all vendors for tenders with estimated value above Rs.25 Lakhs subject to the applicable exemptions. For the exemptions and other details please refer Para 2.0 Part A of Southern Railway Tender conditions.2)In case of submission of Earnest Money Deposit in the form of Bank Guarantee, please refer Annexure- 6 of Part - B of Southern Railway Tender conditions
SECURITY DEPOSIT : SECURITY DEPOSIT (SD) shall be 5 % of total value of contract and shall be taken from all vendors for contract value above Rs. 25 Lakh subject to the applicable exemptions. For details please refer 10.0 Part A of Southern Railway Tender Conditions. In case of submission of security Deposit in the form of Bank Guarantee, please refer Annexure - 5 of Southern Railway Tender conditions. The Security Deposit is valid for 3 months beyond the date of successful supply of the machine. Security deposit to be given within 15 days of placement of Purchase Order.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
1 location across Tamil Nadu · 4 Numbers total
Supply of Trolley Mounted Distribution Transformer 630 KVA
97255705~SR
97255705
Open - Indigenous
Goods
Salem, Tamil Nadu
₹0
₹2.0 L
19 Jan 2026
15 Dec 2025
2 items · 4 Numbers total
Supply of Trolley Mounted Distribution Transformer 630 KVA - Outdoor Type Plinth Mounted Distributi on Transformer of Rating 630 KVA, 3-phase, 22kV, 50Hz, Oil Immersed, Non-Sealed type (Transformer tank body an d cover are bolted), Primary Winding in Delta and Secondary Winding in Star (Vector symbol- Dyn11), ONAN Cooled Transformer, Energy Efficiency level (latest) - 2 & above, Conforming to IS 1180 (Part 1):2014 with amendment nos. 1,2,3,4 or latest, and supplied with all standard fittings mentioned in Clause 20.1 of IS 1180 (part 1) latest with con dition that Drain-cum sampling valve will be applicable for all capacity of transformers. Oil temperature indicators & Winding temperature indicators (for Transformers above 200 KVA) will be provided as per clause 20.2 f) of IS 1180 (part 1). Terminal arrangement: The transformers shall be fitted on high voltage and low voltage sides with outdoor type bushings of appropriate voltage and current ratings. The high voltage bushings (3 Nos.) shall conform to IS/IEC 60137. The low voltage bushings (4 Nos.) shall conform to IS 7421. Suitable cable-end box along with Cable entry h ole glands is to be provided as follows: a) For Outdoor type: L.T. side b) For Indoor type: H.T. side & L.T. side. Along with following details: (i) KVA Rating of required Transformer: 630 KVA (ii) No Load Voltage Ratio: 22KV/433V (iii) Ty pe of Mounting: Plinth (iv) The type of Tap Changer: On load Tap changer for variation of HV Voltage from+5% to -1 5% (v) Indoor or Outdoor Type: Outdoor Following has to be submitted by supplier along with supply of material: (i) Type Test report of Transformer having same rating, make (& model if any) and design from NABL accredited lab as per IS: 1180 (Part 1) latest. (ii) Routine Test Certificates as per IS: 1180(Part 1) latest. (iii) Special Test Certificates as per Clause 21.4 sl. no.(a), (c), (d) & (e) of IS:1180 (Part 1) latest. (THIS ITEM REQUIRES RITES INSPECTION) Warra nty Period: 30 month(s) from the date of Supply The Materials to be supplied at Electric Loco shed, Erode. THE LOC ATION OF SUPPLY INSTALLATION AND COMMISSIONING @ ERODE,SOUTHERN RAILWAY. [ Warranty Period: 30 Mo nths after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SR.SECTION/ENGINEER/ELEC/W/SALEM, SR | Tamil Nadu | 2.00 Numbers |
| Total | 2 Numbers | |
Supply of Trolley Mounted Distribution Transformer 630 KVA - Outdoor Type Plinth Mounted Distributi on Transformer of Rating 630 KVA, 3-phase, 22kV, 50Hz, Oil Immersed, Non-Sealed type (Transformer tank body an d cover are bolted), Primary Winding in Delta and Secondary Winding in Star (Vector symbol- Dyn11), ONAN Cooled Transformer, Energy Efficiency level (latest) - 2 & above, Conforming to IS 1180 (Part 1):2014 with amendment nos. 1,2,3,4 or latest, and supplied with all standard fittings mentioned in Clause 20.1 of IS 1180 (part 1) latest with con dition that Drain-cum sampling valve will be applicable for all capacity of transformers. Oil temperature indicator & Winding temperature indicators (for Transformers above 200KVA) will be provided as per clause 20.2 f) of IS 1180 ( part 1). Terminal arrangement: The transformers shall be fitted on high voltage and low voltage sides with outdoor type bushings of appropriate voltage and current ratings. The high voltage bushings (3 Nos.) shall conform to IS/IEC 60137. The low voltage bushings (4 Nos.) shall conform to IS 7421. Suitable cable-end box along with Cable entry h ole glands is to be provided as follows: a) For Outdoor type: L.T. side b) For Indoor type: H.T. side & L.T. side. Along with following details: (i) KVA Rating of required Transformer: 630 KVA (ii) No Load Voltage Ratio: 22KV/433V (iii) Ty pe of Mounting: Plinth (iv) The type of Tap Changer: On load Tap changer for variation of HV Voltage from+5% to -1 5% (v) Indoor or Outdoor Type: Outdoor Following has to be submitted by supplier along with supply of material: (i) Type Test report of Transformer having same rating, make (& model if any) and design from NABL accredited lab as per IS: 1180 (Part 1) latest. (ii) Routine Test Certificates as per IS: 1180(Part 1) latest. (iii) Special Test Certificates as per Clause 21.4 sl. no.(a), (c), (d) & (e) of IS:1180 (Part 1) latest. (THIS ITEM REQUIRES RITES INSPECTION) Warra nty Period: 30 month(s) from the date of Supply.THE LOCATION OF SUPPLY INSTALLATION AND COMMISSIONING @ ERODE SOUTHERN RAILWAY. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SR.SECTION/ENGINEER/ELEC/W/SALEM, SR | Tamil Nadu | 2.00 Numbers |
| Total | 2 Numbers | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
5613863.pdf
ATTACHMENT
5613893.pdf
ATTACHMENT
5614008.pdf
ATTACHMENT
5623226.pdf
ATTACHMENT
5613991.pdf
ATTACHMENT
5613925.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .