ADDN ALTN TO TOILET BLOCK AND CERTAIN SPL REPAIRS AND CERTAIN REVENUE WORK UNDER GE BRICHGUNJ PORT BLAIR

Amount

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth, for foudation etc, or for shafts, wells cesspits, manholes,pier holes etc n exc 10 sqm on plan and n exc 1.5m in depth and getting out in soft/loose soil.

Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick in soft / loose soil complete all as directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point.

M & L cement concrete type D-2, 1:4:8, using 40mm graded aggregate as in foundations, fillings and mass concrete.

M&L for form work to sides of concrete foundations footings bases of columns and raft beams, sides and soffits of foundation and plinth beams and similar work vertical or to batter.

M&L for reinforced cement concrete M-30 (Design Mix ) 20mm graded aggregate) as in foundation, including rafts, footings, foundation beams, plinth beams, bases for columns etc

M&L MS TMT bars 10 mm dia and over cut to length bent to shape required including cranking bending and binding with MS wire annealed not less than 0.9 mm dia all as specified and as directed

All as per item no 07.00 here in before but 6 to 8mm dia as in stirups

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etccon- forming to Fe.290.Gde-E-165,

S&F framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel')

Mild steel screw bolts, diameter of neck in 16 to 20mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10cm and n exc 15cm long

M&L for two coats of synthetic enamel paints over a coats of red oxide primer including prepration of new steel surfaces of any description over 10 cm in width or girth not otherwise described

S&F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

S&F Pre-painted galvatume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/ cladding/ vally gutter to wall or in door, fixed with self tapping screws as specified.

Design, Supply and fixing at site of the TRAY PANEL SCREW type system with aluminium composite panel of approved colour on exterior walls, columns, MS structure, ceiling, coping, slab projectons at all heights and elevation including necessary aluminium framework. The aluminium composite panel should 4 mm thick consist of 3mm thick thermoplastic core of anti toxidant LDPE sandwitched between 2 skins of 0.5mm thick aluminium alloy sheet making a total panel thickness of 4mm. The external surface shall be finshed with PVDF based coating on the top side and service coating on the reverse side shall be with a polymer paint.NOTE:- The system shall be designed to withstand a wind pressure of 190 kg/Sqm with necessary Alu. sub frames, cleats and shall be fixed to the masonry/ RCC walls/ MS structure with necessary clamps, galvanized M.S brackets and anchor fasteners. All clamps and brackets shall be Hot dip galvanized minimum 80 microns thick and shall conform to IS: 4759-1996. Any other acessories such as fastening straps, nuts, bolts, rivets, washers, etc. other than anchor system shall be in Indian standard grade. all joints of ACP must be sealed with approved sealent of approved colour. sealant make DOW CORNING 789 weather sealant. Rate shall include to provide open cell polyethylene backer rods, weather sealant etc, all materials and labour complete.

S&F PVC (SWR) pipes 150mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors or in walls including band as required complete all as specified

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft / loose soil all as specified and directed.

M&L Hard Core of gauge n.exc. 63mm deposited spread and levelled in layers n.exc. 15 cm thick watered and rolled/ rammed to a true surfce.

M&L for PCC 1:2:4 type B2, using 40mm graded aggregate of 100mm thick as in hardstanding and footpath.

M&L for 60mm thick coloured machine pressed precast concrete interlocking paver block glossy finished any size and shape conforming to IS 15658-2006 , M-35Grade with grey cement and pigment over sand filling complete all as directed.( Cost of Sand will be measured and paid separately)

M & L for Sand filling under floors or in foundations including wateringand consolidation complte all as specified.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premises.

Taking down cement plaster on Brick / Concrete surfaces incl raking out joints, hacking for key scrubbing down with water and Removing Rubbish out side of the MD Land all as directed by Engineer-in-Charge.

Dismantling of boarding any description fixed in any position with nails and any thickness fixed in any position all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specified complete all as directed.(plinthprotection)

Dismantling wall and ceiling board fibre, pulp insulation etc or insulation boards any thickness including cover fillets complete all as specified .

Dismantling for corrugated steel sheeting, any gauge, thickness,including Removing L-type or J-type bolts in Roof Covering.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed

Taking down chowkat with shutter without taking off shutters from the frame n.exc 1.5 Sqm

Taking down chowkat with shutter without taking off shutters from the frame exc 1.5 Sqm but n exc 4 sqm

Demolition of PCC Block wall built in cement mortar or lime mortar complete of any description all as specified and directed.

M&L Precast Cement Concrete Block Masonry with Solid Block, exc 10cm in width in type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:6) all as specified.

M&L 100 mm thick PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in sub bases,

M/L 25mm thk PCC 1:2:4 type B-0 using 12.5 mm graded agg as in flooring finished fair and even without using extra cement.

M&L non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm and not exceeding 0.38 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles over 15mm thick screed bed in CM 1:4

All as per item No 34.00 here in before, but on vertical surfaces incl 10mm thick CM 1:3 as in baking coat of dado/skirting

M&L Rendering 10mm thick on internal sides wall of Brick / Concrete Surfaces in CM (1:6) finished even & smooth without using extra cement.

M&L Rendering 15mm thick on sides of wall of Brick / Concrete Surfaces in CM (1:6) with level plast including 3 to 5% of water proofing compound finished even & smooth without using extra cement.( Note Waterproofing compound and level plast paid separately) Complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated/semicorrugated sheet 0.50mm thick as per approved profile, coloured, having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in ridges to wall, fixed with self tapping screws as specified

Materials and labour for Preparation of New plastered surfaces of walls and applying two coats of Plastic emulsion paint over a coat of primer complete all as specified and as directed .

Materials and labour for complete removal of existing treatment on walls and applying one coat of Putty to make the wall surface in plumb line and applying two coats of Plastic emulsion paint over a coat of primer complete all as specified and as directed .

Preparation of old external surfaces of walls, Facias, cornices etc and applying one coat of weather proof anti fungal paint (Apex - ultima) on coat of external wall putty on walls all as per manufacturer instruction and as directed by Engineer-in-Charge.

M& L for Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) etc complete all as specified and as directed by Engineer-in-Charge.(Make Apex Ultima)

S & F Aluminium anodised (minimum anodisation is 15 microns) Door / window / Ventilator/partition frames and shutters (02 Nos glazed & gauzed), side hung type, without sash bars, standard aluminium grills, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, locking arrangements etc., complete with standard aluminium sections, complete all as specified and as directed by Engineer-in-charge.(Aluminium section shall be of make Jindal/Hindalco/ Indalco). (Note:- Weight of various Aluminium sections handles and locking arrangements shall only be considered for measurement for payment. However cost of rubber packing given in the item shall be deemed to be included in the rate quoted. Glass panels, prelaminated particle boards, aluminium wire cloth as applicable will be measured and paid separately as supplied only).

Supply and fixing factory-made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless-steel screws, joints mitered and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge.

Supply only 5.50mm thick Sheet glass ordinary quality and glazing with oil putty in Square n.exc 0.5sqm in each pane

M&L for 12 mm thick prelaminated particle board to fixed in repair interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work.

S&F 100 Butt hinges extruded aluminium alloy, anodised. With galvanished mild steel hinge pin , anodised and fixed type B-21

S&F 200mm Aluminium anodised barrel tower bolts of extruded sections.

S&F 150mm Extruded aluminium alloy handles, fabricated type, anodised.

M&L for providing 100mm thick cement concrete 1:4:8 type D2 using 40mm graded stonne aggregate as in sub base of flooring complete all as specified and directed.

M & L Chequered cement concrete tiles, with grey cement and pigment 30cm x30cm x20mm thick set, jointed and pointed in neat cement slurrry in floors including 15mm thick screed bed in Cm 1:4 all as specified and directed.

S&F in Repair Brass Mortice Lock, Vertical type size 65 mm, 4 lever of approved make all as directed by Engineer-in-Charge.

S&F in Repair Brass Lockers, Drawer, grade-I,size 50mm 4 levers of approved make all as directed by Engineer-in-Charge.

S&F in Repair Brass 40mm dia Cupboard Knobs fixed with nut, screw and washer, bright finished.

S&F in Repair CP Roller to Sliding Glass all as directed by Engineer - in - Charge.

M&L for 20mm thick Granite of any type work table rubbed and polished in steps, jambs , pillars, cooking platforms and the like including pointing with white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including Screed bed of coat 20mm thick CM (1:4) complete

M&L for 20 mm thick granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12 mm thick in cement mortar (1:4) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L Virified tiles 10 mm thick (square/ rectangular) any shade polished, area of each tiles exceeding 0.42sqm and not exceeding 1.00sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed or bedding layer of mortar 15 mm thick in Cement mortor 1:4 for laying floor finishes.

M&L Virified tiles 10 mm thick (square/ rectangular) any shade polished, area of each tiles exceeding 0.42sqm and not exceeding 1.00sqm, in wall surfaces(skirting/daddo) set and jointed in neat cement slurry and pointed in white or coloured cement to match over backing coat of 10 mm thick in Cement mortor 1:4 all as specified and directed.

Supply only integral WPC

M&L Rendering 10mm thick on concrete surfaces such as sofit of slab, chajja etc in CM (1:3) finished even & smooth without using extra cement.

Taking up or down, 25mm dia bore, GI tubing, medium grade, including cleaning for refixing or removing from site, complete all as specified and as directed by Engineer-in-Charge.

Taking up or down, 20mm dia bore, GI tubing, medium grade, including cleaning for refixing or removing from site, complete all as specified and as directed by Engineer-in-Charge.

S&F of Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe fittings fixed to walls and ceilings or laid in floors complete all as specified.(a) Outer diameter of pipe in 20 mm

All as per item no 71.00 here in before but Outer diameter of pipe in 25 mm

S & F in repairs1000 litres capacity Rotational moulded polythene water storage tanks(cylindrical vertical with closed top) hoisted in position all as specified in SSR Part I

S&F inrepairs 15mm Bore Stop Valves / Angular cock with wall flange chrome kubix prime Make: Jaquar Cat Code No KUP-CHR-35053PM.

S&F inrepairs 15mm Bore Stop Valves / Angular cock with wall flange chrome kubix prime Make: Jaquar Cat Code No QQT 7053.

S&F in repairs two way bib tap with wall Flange Make: Jaquar Cat Part NO QQT 7041 screwed down screwed for iron pipe or brass ferule etc complete all as specified and as directed by Engineer-in-Charge.

S&F in Repair 6mm thickness looking mirror bevelled Edge mounted on bracket as necessary brequirement with chromium plated brass screws and cup washers complete all as specified and directed by the Engineer -in- charge..

S&F in repairs Gun Metal Gate valves 20 mm dia with iron wheel head screwed both ends for iron pipes.

S&F in repairs Chromium Plated Steel Grating of Jaquar Square Shape Body Shower, For Bathroom, Model Name/Number: Make: Jaquar Cat code no BSH-CHR-1751

S & F in Repairs Hand Shower (Health Faucet) with 8mm Dia 1.2 Meter Long Flexible Tube and Wall Hook Make: Jaquar Cat code No ALD-CHR-573 Complete all as specified and directed

Supply and fix vitreous china CASCADE type WC single piece-WC with PP seat Cover, hinges, fixing accessories set, cistern fittings complete of size 640 x 360 x 690 mm , P trap-180mm in approved colour all as specified and directed as per ISI mark. Make : Jaguar cat Part No. SLS-WHT-6851P or equivalent.

S & F in Repairs Bib Cock Make: Jaquar Cat Code no QQT 7073 complete all as specified and directed.

S&F in repair Oval shape vitreous china white thin Rim table top basin of size 500x380x120mm with 32mm waste coupling brass chromium plated suitable for wash hand basins all as specified and directed by Enge-in-Charge. Make: Jaquar Cat code No JDS-WHT-25937

S & F in Repairs Bottle trap 32mm dia Make: Jaquar Cat code No ALD 769L250X190 complete all as specified and directed

S&F vitreous China urinal, half stall type complete including waste pipe, flush pipe & providing and fixing plugs, bedding urinal against wall in cement morter 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement etc, and including connection to flushing pipe, Spreader and outgoing pipes fixed in repairs complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs SS Towel holder all as specified. Make: Jaquar cat code no. AQN7711

S & F in Repair corner Glass Shelf with Bracket all as specified and directed Make: Jaquar Cat ACN 1173

S & F in Repair Towel Ring Round Complte all as specified and directed. Make: Jaquar Cat AQN 7721

Supply and fix brass CP 15mm dia bore Central hole basin mixer with regular spout without popup waste system with 450mm long braided hoses, 20mm cartridge size also available complete all as specified and as directed by Engineer-in-Charge. Make: Jaquar cat Part No.FLR-5167NB

S&F in repairs PVC flexible connections 15 mm dia 450 mm long with brass checknuts .

S&F in Repair Jaguar Toilet Paper Holder Make: Jaquar Cat Part No AQN 7751 all as specified and directed by Engineer in charge. .

S&F in Repair Jaguar Glass Shelf 550mm long Make: Jaquar Cat Part No AQN 7771 all as specified and directed by Engineer in charge. .

S&F in Repair Jaguar Model No 111Q UC Curved Shapped Urinal Patriation with toughened Glass 10mm thick finish chrome incl fixing with ss Brackets Make: Jaquar Cat Part No JSE CHR 110UC 450X all as specified and directed by Engineer in charge

S&F in Repair 20mm thick marble tiles machine cut in skirting/dado/ Cooking Plate form / Table Top laid over cement screed and jointed with grey cement slurry including cutting and polishing of type all as specified and directed by Engineer in charge. ( Note :- Colour/ Shade is finalized by GE)

S&F in repairs PVC flexible connections 15 mm dia 450 mm long with brass checknuts .

Taking down PVC waste ,vent,rain water pipes incl fittings in any position

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to walls

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,laid in floor.

S&F 75mm dia outlet PVC (SWR) PVC (SWR) multi floor trap with grating including jointing with solvent cement

S&F PVC (SWR) Gully trap 125/110 mm,seting and incl joining with solvent cement

S&F 110mm PVC (SWR) WC connector bent type setting including Joining with solvent cement

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to walls

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,laid in floors.

S&F 75mm dia PVC (SWR) bend with oval access door

S&F 110mm dia PVC (SWR) bend with oval access door

S&F PVC (SWR) cowls 100mm dia.

S&F PVC (SWR) cowls 75mm dia.

M&L for precast man holes cover slab with 1:2:4 type B1 using 20mm graded stone aggregate set in CM 1:4 incl cost of use and waste of clean sawn wooden form work but excl cost of reinforcement all as specified

M&L PCC 1:2:4 type B1 using 20mm graded stone aggregate as in surface channel / benching incl cost of use and waste of clean sawn wooden form work all as specified

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mi-ted/stoped ends etc

M&L in repairs water proofing treatment to RCC roof by priming the plastered surfaces with a coat of cold applied bituminous primer conforming to IS 2488 @ 0.30 kg/sqm and laying APP modified five layer polymeric membrane 3mm thick of minimum wt. 3.50 kg/sqm reinforced with polyster non woven fabric (weighing not less than 150 gms/sqm) laid by torch application as per the manufacturers instructions with side overlap of 75mm & end overlap of 100mm & tucked into the chases on vertical surfaces to a height of 300mm & finally finished with bituminous aluminium paint @ 0.10 kg/sqm complete including taking down existing roof treatment all as specified and as directed.

M&L for 25 mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in padding to roof slab and rendering 5 mm thick in one layers on concrete surface cement sand mortar 1:3 using water proofing compound @ 3% by weight of cement finished even fair and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. Note:WPC will be measured and paid separately.

M & L for RCC- M -30 Design Mix as in slabs supported on walls,beams and columns in floors, roofs, landings, balconies,canopies, deck slabs and in,shelves and the likeall as specified and directed

Use and waste of form work to sides and sofit of Roof Slab & Chajja etc for Fair finished surfaces.

Material and labour for false ceiling with aluminium grid work ( 600x600mm) with 35x25x1.5 mm main tee and 25x25x1.4mm cross tee and wall angles and suspended with 2mm dia GI wire hooked to roof with needful adjustment bolts at an interval of 1.20m center to center staggered and board with ECO board decorative type size 600x600x4mm thick finished with two coats of oil bound distemper overa coat of primer on exposed surface all as specified and directed.

S&F steel work in tubular trusses incl special shaped washer etc.. Complete using ERW or induction built welded tubes conforming to IS 1161-1979 grade St-240

Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) DBs complete offering credit, making good disturbed surfaces of walls, floors, etc, all as specified and as directed.

M&L Point wiring complete with 1.5 sqmm single core FRLS PVC insulated and unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including PVC casing and caping and all accessories fixed to walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm copper cable green in colour as earth continuity conductor and connected to common earth dolly, including fabricated steel terminal box made out of 1.60mm thick MS sheet concealed in walls, with 3mm thick laminated sheet top cover for housing the switches, socket outlets,fan regulators etc., all as specified and as directed forthe following:-One light point /Bell point controlled by one switch

All as per item no 114.00 here in before but for One 3 pin switch socket outlet point 5 amps on independent board

All as per item No 114.00 here-in-before but for 3 pin 15 Amps switch socket combination on independent board with 4 sq mm copper cable and provision of 4 sq mm FRLS PVC insulated stranded copper conductor cable for earth continuity conductor connected to common earth dolly connecting upto fittings complete all as specified and as directed.

Supply and fix switch piano flush button single pole oneway 5 amp complete all as specified and as directed.

Supply and fix switch socket combination 3 & 2 pin (multi pin) 5 amp flush type complete all as specified and as directed.

Supply and fix switch socket outlet multipurpose 3 pin 15 and 5 amp controlled by one switch, flush type complete all as specified and as directed.

Supply and fix ceiling rose surface bakelite 65x50mm 3 terminal complete all as specified and as directed.

Supply and fix in repair metal enclosure distribution board SPN, 8 way 240 volts, with 200 amps rated bus bar, double door suitable for mounting MCBs including taking down old MCB/DB complete all as specified and directed. Note-: Incoming & outgoing connections from the DB shall be provided with proper lugs/ thimbles etc

Supply and fix in repair MCB single pole 240 volts, 6 to 32 amps "C" series complete all as specified and as directed by Engineer-in-Charge

Supply and fix single pole and netural 240 Volts 32 amps complete all as specified and as directed by Engineer-in-Charge

Supply and fix triple pole and netural 63 amps B series complete all as specified and as directed by Engineer-in-Charge

Supply and fix Recess mounted LED slim 20 w Round type downlighter with die cast aluminium housing prewired upto connection block and connecting with three core PVC copper flexible cable from ceiling rose to connector block, including taking down old unserviceable fitting of any wattage, complete all as specified and directed by Engineer-in-Charge.

M & L in repairs for sub main wiring complete with two runs of 6 Sqmm FRLS single core PVC insulated unsheathed single core cable 1100 volts grade, multistranded with copper conductor (ISI Marked) drawn through and including PVC Casing and caping and all accessories fixed to wall/ roofs/ floors etc with one run of 6 sqmm FRLS single core multistranded copper conductor as earth continuity conductor, including dismantling unserviceable sub main wiring including accessories,complete all as specified and as directed by Engineer-in-Charge. Note : (1) Two runs of cable one run of casing caping & one run of earth continuity conductor shall be measured as one running metre.

M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less thab 1.5 Meter below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 20 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as specified and directed electrical plate No. 3 of SSR part - I

M&L Point wiring complete with 1.5 sqmm single core FRLS PVC insulated cable 1100 volts grade with multistranded copper conductor drawn through and including PVC casing and caping with all accessories, fittings, PVC junction boxes etc, with necessary fixing accessories and earth continuity conductor cable of 1.5 Sqmm size connected to common earth and earth dolly including 1.6 mm thick pressed steel terminal boxes suitable for modular fittings, concealed in wall for mounting switches / sockets / fan regulators fixed with Cadmium plated machine screws and making good the disturbed surface all as specified One exhaust fan pointcontrolled one switch

All as per item no 128.00 here in before but One fan point controlled by one switch and one regulator

Supply and fixing Modular switch 1 way 5 A, 1 module all as specified and directed.

Supply and fixing modular socket outlet, 2/3 pin combined , 6 Amps, combined 2 module, 230 volts all as specified and directed.

Supply and fixing modular socket outlet, 2/3 pin combined , 6/16 Amps, combined 2 module, 230 volts all as specified and directed.

S & F modular white cover plate with frame, 3 module all as specified and directed.

S & F modular white cover plate with frame, 6 module all as specified and directed.

Supply and fix in repair metal enclosure distribution board SPN, 4way 240 volts, with 200 amps rated bus bar, with IP 43 protection and double door, suitable for mounting MCBs, including taking down old MCB/DB, complete all as as specified and as directed by Engineer-in-Charge Make :Legrand/C&S/L&T Note:- Incoming & Outgoing connections from the DB shall be provided with proper lugs/thimbles etc...

Supply and fix in repair metal enclosure distribution board TPN, 4 way 415 volts, with 200 amps rated bus bar, with IP 43 protection and double door, suitable for mounting MCBs, including taking down old MCB/DB, complete all as as specified and as directed by Engineer-in-Charge Make :Legrand/C&S/L&T Note:- Incoming & Outgoing connections from the DB shall be provided with proper lugs/thimbles etc...

Supply and fix air ventilation light weight metal body electric driven AC I Ø, 225mm sweep with louvers including grouting and making whole in wall complete all as specified.

Supply and fixing LED lights fitting 1x 20W, 220V, polycarbonate housing AC decorative box type 4 feet with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as directed and as specified by the engineer in charge.

All as per item sl No 138.00 here in before but LED 10W capacity complete all as specified and directed.

Material & labour, earthing complete with galvanize steel earth plate electrode 60 cms x 60 cms x6.00mm thick buried directly in ground vertically to a depth not less than 2.25 meter below ground level with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4.0mm by means of bolts ,nuts ,check nuts and washers of galvanized iron or steel and thimbles and other end of the earth wire connected to main switch board and protected by galvanized iron or steel pipe light grade 40 mm bore and water pipe 20 mm bore GI light grade (ISI marked ) with funnel and wire mesh ,including all necessary excavation and earth work PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover and all as shown in electrical plate No, 5 of MES Sch Part-1 (2009), complete all as specified and directed.

Supply and fix surface mounted LED 12 w Round type downlighter with die cast aluminium housing coating prewired upto connection block and connecting with three core PVC copper flexible cable from ceiling rose to connector block, including taking down old unserviceable fitting of any wattage, complete all as specified and directed by Engineer-in-Charge.

M & L in repairs for sub main wiring complete with two runs of 4 Sqmm FRLS single core PVC insulated single core cable 1100 volts grade, multistranded with copper conductor (ISI Marked) drawn through and including PVC Casing and caping and all accessories fixed to wall/ roofs/ floors etc with one run of 4 sqmm FRLS single core multistranded copper conductor as earth continuity conductor, including dismantling unserviceable sub main wiring including accessories,complete all as specified and as directed by Engineer-in-Charge. Note : (1) Two runs of cable one run of conduit & one run of earth continuity conductor shall be measured as one running metre.

M/S SHAJAHAN BUILDERS

Kakolil Trade Agencies

NAVJEEVAN ENTERPRISES

ICON AGENCIES

bansal construction

M/s Pooja Enterprises

M/s S A Traders