Construction of Street Vendor market with Parking under MC Solan at Bye Pass Solan Sub head First floor

Amount

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in: a) Collumn, pillars, posts and struts.

Beams, cantilever, girders and lintels.

Flat Surface such as soffits of suspended floors, roofs, landings and the like.

Providing and laying cement concrete 1:1.5:3 (1cement :1.5 sand :3 graded stone aggregate 20mm. nominal size) and curing complete excluding cost of form work and reinforcement for feinforced concrete work in:Column,pillars, posts,and struts.

Suspended floors roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilevers upto floor two level

Brick work using common burnt clay building bricks in cement mortar 1:6(1cement:6 sand) all floors and all height. In cment mortar 1:6(1 cement: 6 Sand) Second class bricks

Half brick work using common burnt clay building bricks in cement mortar 1:4 (1cement:4sand)Second class bricks all floors and all height.

6mm Cement plaster to ceiling in cement mortar 1:4(1 cement: 4 Sand)

10mm thcik cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto floors two level including arises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:4(1cement:4sand)

Providing wood work in frames of doors, windows, clerestory, windows and other frames wrought, framed and fixed in Position. 1st Class Deodar Wood

Providing and fixing paneled glazed shutters for doors windows and clerestory windows including black enamaelled iron butt hinges with necessary screws. 50mmthick 1st Class Deodar Wood

Glazing with Glass panes of 5.5 mm thickness (weight not less than 13.75 Kg/Sqm).

White washing with lime on undecorated wall surfaces two coats to give an even shade including throughly brooming the surface to remove all dirt dust mortar dirt and other foreign matter.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreigen matter, sand papering and knotting. Readymixed paint brushing with white lead for priming.

Painting two coats( excluding priming coat) on new wood and wood based surfaces with ready mixed paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter sand papering and stopping. With white enamel paint.

Providing mild steel /tor steel reinforcment for r.c.c. work including bending ,binding and placing in position complete up to floor level . Tor steel

BHUPENDER SINGH THAKUR

VIKRANT SHARMA

Virender Thakur