Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.3 LAccepted-AOC ITTIKUNNATH X 386 KOREPARAMBIL ROAD NJARACKAL ERNAKULAM 682505 | ERNAKULAM | ERNAKULAM | KERALA | 682505 | L1 | Accepted-AOC L1 | |
| 2 | L2₹36.9 L+₹4.6 L (14.1%)Rejected-Finance NO 17 PETER GNANA PRAKASAM NAGAR MARIYAMMAN KOVIL PO THANJAVUR 611501 | 611501 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹39.5 L+₹7.2 L (22.3%)Rejected-Finance | L3 | Rejected-Finance Other than L1 |
| Sl No | Description | Qty | Unit | M/S. SRI RAMANUJA CONSTRUCTIONS L2 | NITHYASRI AND CO L3 | HIGH TECH ENGINEERS AND CO L1 |
|---|---|---|---|---|---|---|
| 1.00 | Excavation in post holes on existing hard standing and PQC of any description and any thicknes including (or Similar holes) each post holes not exc 0.50 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25cm, watering and removing surplus soil to a distance not exc 50m and making good surface in hard /dense soil complete all as specified and as directed. | 90 | Each | 320 ₹28,800 | 490 ₹44,100 | 50 ₹4,500 Lowest |
| 2.00 | M&L PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundation filling and mass concreting complete all as specified and as directed. | 36.61 | Cum | 4,100 ₹1,50,101 | 2,800 ₹1,02,508 Lowest | 5,000 ₹1,83,050 |
| 3.00 | S&F rolled Galvanised Iron angle as in Posts, roof trusses (framed), trussed, purlins, crane gantries, ladders, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats confirming to Fe-410W(Gde E-250) quality A complete all as specified and as directed. | 12,870 | Kg | 123 ₹15,83,010 | 171 ₹22,00,770 | 100 ₹12,87,000 Lowest |
| 4.00 | S&F bands, straps, supports or stays for rainwater, plain angle cleat for securing purlin, knee piece inserts, two way and three way straps, plate washer and similar small articles, confirming to Fe-290 Gde E-165 complete all as specified and as directed. | 450 | Kg | 160 ₹72,000 | 175 ₹78,750 | 100 ₹45,000 Lowest |
| 5.00 | S&F plates (plain or chequered) Channels, square, cut or notched (ordinary and counter sunk) forming holes without any attachment of Fe-410-W (Grade E-250) quality B complete all as specified and as directed. | 2,250 | Kg | 98 ₹2,20,500 Lowest | 175 ₹3,93,750 | 100 ₹2,25,000 |
| 6.00 | S&F mild steel works such as wind ties for roof including securing with bolts etc and similar work using rolled section confirming to Fe-290 Gde E-165 complete all as specified and as directed. | 750 | Kg | 98 ₹73,500 Lowest | 110 ₹82,500 | 110 ₹82,500 |
| 7.00 | S&F pre-painted high tensile strength corrugated galvalume sheet roofing with yield strength (550 MPA) prepainted with aluminium (55%) and zinc (45%) alloy coating applied through continous hot dip process having tatal coated thickness (TCT) of 0.50mm with minimum coating mass on both sides @ 150gms/sqm in length and width as per site condition fixed with complete acessories as per manufacturer's instructions through specialist agency complete all as specified and as directed. | 450 | Sqm | 890 ₹4,00,500 | 650 ₹2,92,500 Lowest | 950 ₹4,27,500 |
| 8.00 | S&F pre-painted high tensile strength galvalume plain sheet as in ridge, eve board, weather board and in strraight flashing etc with yield strength (550 MPA) prepainted with aluminium (55%) and zinc (45%) alloy coating applied through continous hot dip process having tatal coated thickness (TCT) of 0.50mm with minimum coating mass on both sides @ 150gms/sqm in length and width as per site condition fixed with complete acessories as per manufacturer's instructions through specialist agency and as per profile and shade as approved by GE. | 30 | Sqm | 650 ₹19,500 Lowest | 700 ₹21,000 | 900 ₹27,000 |
| 9.00 | M&L Framed work such as grills,gratings, etc.. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed | 75 | Kg | 140 ₹10,500 | 150 ₹11,250 | 110 ₹8,250 Lowest |
| 10.00 | S&F 1 mm thick Plain, black, mild steel sheeting, as in wall cladding over framed grid for sentry posts etc and other similar articles like ridges hips, valley gutters,drip and straight flashings complete all as specified and as directed | 7 | Sqm | 750 ₹5,250 Lowest | 3,200 ₹22,400 | 1,950 ₹13,650 |
Tender Value
Refer Docs
EMD Value
₹89,000
Closing Date
3 Dec 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer
Garrison Engineer AF Thanjavur
PROVN OF ELEVATED SENTRY POSTS AT AFS THANJAVUR
2025_MES_739375_1
8243/E8
Open Tender
Civil Works
Item Rate
180 days
Garrison Engineer AF Thanjavur
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Garrison Engineer
₹89,000
Yes
2 Jan 2026
12 Nov 2025
4 Dec 2025
12 Nov 2025
3 Dec 2025
27 Nov 2025
Amount
Excavation in post holes on existing hard standing and PQC of any description and any thicknes including (or Similar holes) each post holes not exc 0.50 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25cm, watering and removing surplus soil to a distance not exc 50m and making good surface in hard /dense soil complete all as specified and as directed.
M&L PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundation filling and mass concreting complete all as specified and as directed.
S&F rolled Galvanised Iron angle as in Posts, roof trusses (framed), trussed, purlins, crane gantries, ladders, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats confirming to Fe-410W(Gde E-250) quality A complete all as specified and as directed.
S&F bands, straps, supports or stays for rainwater, plain angle cleat for securing purlin, knee piece inserts, two way and three way straps, plate washer and similar small articles, confirming to Fe-290 Gde E-165 complete all as specified and as directed.
S&F plates (plain or chequered) Channels, square, cut or notched (ordinary and counter sunk) forming holes without any attachment of Fe-410-W (Grade E-250) quality B complete all as specified and as directed.
S&F mild steel works such as wind ties for roof including securing with bolts etc and similar work using rolled section confirming to Fe-290 Gde E-165 complete all as specified and as directed.
S&F pre-painted high tensile strength corrugated galvalume sheet roofing with yield strength (550 MPA) prepainted with aluminium (55%) and zinc (45%) alloy coating applied through continous hot dip process having tatal coated thickness (TCT) of 0.50mm with minimum coating mass on both sides @ 150gms/sqm in length and width as per site condition fixed with complete acessories as per manufacturer's instructions through specialist agency complete all as specified and as directed.
S&F pre-painted high tensile strength galvalume plain sheet as in ridge, eve board, weather board and in strraight flashing etc with yield strength (550 MPA) prepainted with aluminium (55%) and zinc (45%) alloy coating applied through continous hot dip process having tatal coated thickness (TCT) of 0.50mm with minimum coating mass on both sides @ 150gms/sqm in length and width as per site condition fixed with complete acessories as per manufacturer's instructions through specialist agency and as per profile and shade as approved by GE.
M&L Framed work such as grills,gratings, etc.. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed
S&F 1 mm thick Plain, black, mild steel sheeting, as in wall cladding over framed grid for sentry posts etc and other similar articles like ridges hips, valley gutters,drip and straight flashings complete all as specified and as directed
M&L Preperation of new steel surfaces of camouflage pattern of any description over 10 cm in width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed
M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening Fe 410 -W (Gde-E- 250) quality- A complete all as specified and as directed
Supply installation testing and commissioning of flood light weather proof and vermin proof LED light with 400 watt including fixtures complete all as specified and as directed
Supply, laying and testing service connection cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6 sq mm 2 core including with end termination sleeves with suitable lugs, thimble, nut-bolts etc complete connection from existing near by street light to Prop Building security light complete all as specified and as directed
Supply, laying and testing service connection cable (for DB) of cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core including with end termination sleeves with suitable lugs, thimble, nut-bolts etc complete connection from existing Panel / DB to Prop DB complete all as specified and as directed
Excavation in trenches n.exc 1.5 mtr wide and n exc in depth for taking out cable / pipe line n.exc 10 sq mtr on plan and n.exc 1.5 mtr depth and getting out in soft/loose soil comlete all as specified and as directed.
Returning and filling in two parts (i) using riddled soil obtain from excavated soil upto depth of 30 cm (8 cm below cable and remaining above cable) for cushioning of cable and (ii) refilling the trench of remaining depth with normal excavated soil complete all as specified and directed. Note:- Excavated soil shall be riddled by using sieve to separate composite particles etc as per IS 1255 1983 and refilling in trenches as in cable cushioning.
Removing excavated materials n.exc 50 mtr depositing where directed at a level n.exc 1.5 m complete all as specified and as directed.
M&L point wiring with 1.5 Sqmm (nominal cross-sectional area) PVC insulated unsheathed single core copper cable working voltage 1100volts grade conforming to IS-694 with multistranded copper conductor flame retardant low smoke (FRLS) in including PVC rigid non metallic 25 mm PVC casing caping (double Lock) including PVC polycarbonate/PVC/rectangular block/box of suitable size fixed by means of brass machjne screw and cap washer including size 1.5 sqmm (nominal cross sectional area PVC insulated unsheathed single core multistranded copper conductr cable as earth continuity conductor connected to main switches/DBs or common earth dolly complete all as specified and as directed
Description all as per sr item No 19 mentioned here-in-before but for one ceiling fan / Exhaust fan point, controlled by one way switches 5/6 Amps complete all as specified and as directed
Description all as per srl item No 19 here-in-before but for one 3 pin socket outlet point, 5/6 Amps on the independent board complete all as specified and as directed.
Description all as per item No 19 here-in-before but for point wiring with 4 Sq mm (nominal cross sectional area) single core stranded copper conductor for one switch socket out let point, 15/16 amps on the independent board complete all as specified and as directed
S&F Switch socket combination, 2 and 3 Pin, 5/6 amps, multipurpose, flush, non shutter, non inter locking type white/ ivory finish complete all as specified and as directed
S&F Switch socket combination, 2 in 1, 6 pin, 5/6 amps and 15/16 amps multipurpose, white/ivory finish, flush non shutter non inter locking type complete all as specified and as directed.
S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), double door, single pole & neutral with 200 amps rated bus bar, IP-43 protection suitable for fixing MCB"S/lsolators after complete all as specified and directed.
S&F MCB, Single pole & neutral, 6 to 32 amps, 240 volts, ‘C’ curve, 10KA complete all as specified and as directed
S&F MCB, Single pole, 6 to 32 amps, 240 volts, ‘C’ curve, 10 KA complete all as specified and as directed
S&F LED PRIDE ESSENTIAL wall mounted LED light 20 Watt LED, 6500K with decorative ultra slim square profile LED lighting fixture with extruded polycorbonate environmental friendly energy efficient complete all as specified and directed.
S&F ceiling fan with 600mm sweep complete all as specified and as directed
S&F LED bldg security light/street light 20/30 watt 6500K with best in class design and robust heat sink along with class leading IP,IK and surge protections for long lasting performance complete all as specified and as directed
M/S. SRI RAMANUJA CONSTRUCTIONS (BID ID -3488509)
NITHYASRI AND CO (BID ID -3488577)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.20 MB
TenderDocuments8243.pdf
Tender Documents • 0.93 MB
BOQ_827903.xls
BOQ • 0.25 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .