REPAIRS REPLACEMENT OF JOINERY PLUMBING TILING SANITARY FITTINGS STEEL GATE ROLLING SHUTTER ETC IN DGQA AREA UNDER AGE BR I OF GE I KANPUR

Amount

B/R Schedule

Taking down chowkhats or frame n.exc 1.50 sqm with shutters (wihtout taking of shutter from frame ) etc complete all as specified and directed.

Taking down chowkhats or frame exc 1.50 sqm but n.exc. 4.00 Sqm each with shutters (wihtout taking of shutter from frame ) etc complete all as specified and directed.

Taking down shutter exceeding 1.00 Sqm but not exceeding 2.0 Sqm each complete all as specified and directed.

All as item no 04 above here in before but area not exceeding 1.0 Sqm each complete all as specified and directed.

S & F of 30 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. Note : Manufacturer test certificate and PVrs shall be submitted by contractor before claiming payment against this item.

S&F 19/20mm thick Particle board, exterior grade prelaminated both sides with decorative choice lamination, fixed with nails/ screw screws to timber/steel frame work as in shutters, shelving to cup boards etc complete including 6 mm thick teak wood lipping all as specified and directed

Material & Labour two coats of synthetic enamel paint over a coat of pink primer to new wooden surface of any description over 10 cm width or girth including preparation of new surface complete all as specified and directed.

S&F MS butt hinges medium weight cold rolled 100 mm size.complete all as specified and as directed.

S&F continuous (piano) hinges, of mild steel (chromium plated) of 40mm width of flaps complete all as specified and as directed.

S&F of 200 mm long barrel tower bolt aluminium anodised of extruded section and fixed complete all as specified and directed.

S&F of 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F aluminium hasp & staple safety type 100mm size complete all as specified and as directed.

S&F of 300 mm long aluminium anodised sliding door bolt with hasp and staple and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

M&L for powder coated aluminium glazed window shutters with frame openable, section for aluminium frame 100 x 45 x 2.00mm thick & section for shutter 45 x 44.45 x 1.90 mm thick incl 5mm thick tinted glass sheet with rubber beading clip, hinges, handles, tower bolts etc complete all as specified and directed.. (Make of Aluminium section : Hindalco/Jindal)

M&L for powder coated aluminium glazed window shutters with frame openable, section for aluminium frame 100 x 45 x 2.00mm thick & section for shutter 45 x 44.45 x 1.90 mm thick incl provision of opening for window AC opening and 5mm thick tinted glass sheet with rubber beading clip, hinges, handles, tower bolts etc complete all as specified and directed. (Make of Aluminium section : Hindalco/Jindal)

S&F for powder coated Aluminium door partly glazed (using 5mm thick glass) and partly panelled or fully Glazed (using 12mm thick both side prelaminated board Noavapan Kitlam) door with bottom rail of section 114x44.5x1.5mm thick and middle and top rail and style of section 84x44.45x 1.5mm thick incl 125mm dia circular aluminium handle tower bolt, mortice lock of brass size 65mm, vertical type with fair levers door stopper double leg rubber beading and door spring of sandhu/sanant make, two numbers door stopper, hinges (three Nos each side) etc and aluminium frame of section 100x44.45x2.00mm thick complete all as specified and directed by Engr -in- Charge. (Make of Aluminium section : Hindalco/Jindal)

M&L for powder coated aluminium grill of mesh size 65 x 75mm of 6mm dia of aluminium bar fixed with 'Y' or 'H' aluminium sec all as specified

M&L for aluminium anodised glazed window shutters with frame openable, section for aluminium frame 100 x 45 x 2.00mm thick & section for shutter 45 x 44.45 x 1.90 mm thick incl 5mm thick tinted glass sheet with rubber beading clip, hinges, handles, tower bolts etc complete all as specified and directed.. (Make of Aluminium section : Hindalco/Jindal)

M&L for aluminium anodised glazed window shutters with frame openable, section for aluminium frame 100 x 45 x 2.00mm thick & section for shutter 45 x 44.45 x 1.90 mm thick incl provision of opening for window AC opening and 5mm thick tinted glass sheet with rubber beading clip, hinges, handles, tower bolts etc complete all as specified and directed. (Make of Aluminium section : Hindalco/Jindal)

S&F for Aluminium anodised door partly glazed (using 5mm thick glass) and partly panelled or fully Glazed (using 12mm thick both side prelaminated board Noavapan Kitlam) door with bottom rail of section 114x44.5x1.5mm thick and middle and top rail and style of section 84x44.45x 1.5mm thick incl 125mm dia circular aluminium anodised handle tower bolt, mortice lock of brass size 65mm, vertical type with fair levers door stopper double leg rubber beading and door spring of sandhu/sanant make, two numbers door stopper, hinges (three Nos each side) etc and aluminium frame of section 100x44.45x2.00mm thick complete all as specified and directed by Engr -in- Charge. (Make of Aluminium section : Hindalco/Jindal)

M&L for aluminium anodised grill of mesh size 65 x 75mm of 6mm dia of aluminium bar fixed with 'Y' or 'H' aluminium sec all as specified

Dismantling of aluminium partition in any description incliuding glass and board complete all as specified

S&F powder coated aluminium partition with aluminium tube of section 114x44.45x1.90mm thick at bottom and remaining vertical and horizontal rails of section 44.45x45x1.9mm thick and top rail of section 44.45x45x1.90mm thick with aluminium anodized clips, rubber, beading, aluminium angle, nut bolt etc (from bottom 75cm height/Novapan/Kit Lam both side laminated 12mm thick ISI marked and remaining parts of partition shall be covered with plain float glass of 5.0mm thick (maximum spacing of glazed aluminium tube in horizontal 75cm C/C and in vertical 120Cm C/C ) all as specified and directed.(Make of Aluminium section : Hindalco/Jindal)

S&F aluminium anodised partition with aluminium tube of section 114x44.45x1.90mm thick at bottom and remaining vertical and horizontal rails of section 44.45x45x1.9mm thick and top rail of section 44.45x45x1.90mm thick with aluminium anodized clips, rubber, bading, aluminium angle, nut bolt etc (from bottom 75cm height/Novapan/Kit Lam both side laminated 12mm thick ISI marked and remaining parts of partition shall be covered with plain float glass of 5.0mm thick (maximum spacing of glazed alu tube in horizontal 75cm C/C and in vertical 120Cm C/C ) all as specified and directed.

M&L solid PVC frame ( single rebated) of size 50 mmx 47 mm made oud of 5mm plain colour PVC sheet with homogenious fine cellular structure having smooth outer integral skin with suitable metal stifner & fixed with 100x8 sheet metal CSK (copper screws)screws complete all as specified and directed and as shown drawing .

M&L factory made solid panel PVC moulded door shutter with wood free EPS 28 to 30 mm thick (style) with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plan colour PVC sheet on back face, supply & fix in frame at site as per specified & directed.

S&F 100 mm long PVC butt hinges complete all as specified and as directed. Make : Prayag or equivalent as approved by GE..

S&F 150 mm long PVC handle complete all as specified and as directed. Make : Prayag or equivalent as approved by GE.

S&F 150 mm long PVC barrel tower bolt complete all as specified and as directed. Make : Prayag or equivalent as approved by GE.

S&F factory made steel tubular window with side hung shutters including box type hinges with steel handle and stel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed as per HQCELZ Lucknow Drg No LZ/C-TD/130 sheet 1/4 to 4/4 .

S&F factory made steel tubular Steel window with side hung shutters including box type hinges with steel handle and stel peg stay complete without glazing bars dovetailed or welded complete all as as per HQCELZ Lucknow Drg No LZ/C-TD/130 sheet 1/4 to 4/4 i.specified and directed.

M&L factory made steel tubular Steel ventilators with top hung shutter including hinges, steel peg stay complete as as per HQCELZ Lucknow Drg No LZ/C-TD/130 sheet 1/4 to 4/4 .specified and directed..

S&F mild steel Framed work such as grills, grating etc. with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

M/L for preparation of new steel surfaces any description not other wise described over 10 Cm width or girth and applying two coat of Synthetic Enamel paint complete over a coat of red oxide primer all as specified and as directed.

S&F for galvnanised mild steel wire galvanized 0.45mm nominal dia of wire and average width of aperture 1.40mm complete and all as specified and directed

S&F 3mm thick plain glass sheet and glazing with oil putty in squares n. exc 0.5sqm in each pane complete all as specified and directed.

S&F 3mm thick Sheet glass in repair ordinary quality and glazing with oil putty in square n. exc. 0.5 Sqm in each pane including hackingout complete all as specified and directed.

Dismentling of Asbestos cement corrugated and semi corrugated sheets in roof covering complete all as specified and directed.

S & F of regular modified Polyester colour coated galvanized steel rib profile sheet(TCT) 0.50mm thick E42(inclusive of protective coating ) overall width 1060mm and total mass coating of 150 gms/sqm on both sides as per IS-14246:95(JIS:3312 polyester coating 30-40 micron) as in roof etc fixed etc fixed to iron /wooden members with self drilling zinkallum coated metal screws having cap with rubber washers more than 3.00sqm patches as required in shapes complete all as specified and directed. Make: (a) Lloyd Insulation (b) Tata bluescope steel building solutions Ltd.(c) Prestar Infrastructure Project Ltd (d) Colour Roof India Ltd.(CRIL) (e) M/s Matco Roof PvtLltd. (f) Ispat Industries Ltd (JSW) (g) Everest Industries

S & F regular modified Polyester colour coated galvanized steel plain profile sheet(TCT) 0.50mm thick E42 (inclusive of protective coating ) as in ridge , valley, gutter and total mass coating of 150 gms/sqm on both sides as per IS-14246:95(JIS:3312 polyester coating 30-40 micron) as in roof etc fixed etc fixed to iron /wooden members with self drilling zinkallum coated metal screws having cap with rubber washers complete all as specified and directed. Make: (a) Lloyd Insulation (b) Tata bluescope steel building solutions Ltd.(c) Prestar Infrastructure Project Ltd (d) Colour Roof India Ltd.(CRIL) (e) M/s Matco Roof PvtLltd. (f) Ispat Industries Ltd (JSW) (g) Everest Industries

S&F mild steel wind ties for roof including securing bolts as directed, including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 ® complete all as specified and as directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and directed.

Demolition of cement concrete not exc 15 cm thickness below or above ground level of any description complete all as specified and directed

M&L for 25 mm thick plain cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in floors, finished even and rough to receive floor topping complete all as specified and directed.

M&L for first quality glazed ceramic coloured tiles of size 300mm x 450mm x 7 to 8 mm thick on vertical surfaces; set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tile over and including 10 mm thick cement plaster in cement mortar 1:4, as in dado/ skirting complete all as specified and directed. Note: Colour, design and pattern shall be approved by GE(I).

Material and labour glazed ceramic coloured tiles vertical surface 300x 200x 7mm thick set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tile as in patches area exc 0.2 sqm but not exc 1.0 Sqm including taking down old tiles over and including 10mm rendering on fair faces of wall 1:4 cement all as specified.

M&L for 10 mm thick first quality Vitrified ceremic tiles light shade (square/ rectangular) area of each tile not exceeding 0.36 Sqm in floors etc; laid jointing in neat cement slurry and pointed in white cement mixed with pigment to match with shade of tiles over and including 15 mm thick screed bed in CM ( 1:6 ) complete all as specified and directed. Note: Colour, design and pattern shall be approved by GE(I).

All as per item No 48 but in skirting over and including 10 mm thick backing plaster in CM (1:4)

M&L for 10 mm thick first quality Vitrified ceremic tiles dark shade (square/ rectangular) area of each tile not exceeding 0.36 Sqm in floors etc; laid jointing in neat cement slurry and pointed in white cement mixed with pigment to match with shade of tiles over and including 15 mm thick screed bed in CM ( 1:6 ) complete all as specified and directed. Note: Colour, design and pattern shall be approved by GE(I).

M&L for first quality 7 to 8 mm thick non skid ceramic coloured tiles (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors etc; laid jointing in neat cement slurry and pointed in white cement mixed with pigment to match with shade of tiles over and including 15 mm thick screed bed in CM ( 1:4 ) complete all as specified and directed. Note: Colour, design and pattern shall be approved by GE(I).

M&L for first quality 7 to 8 mm thick non skid ceramic coloured tiles (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm as in floors etc; laid jointing in neat cement slurry and pointed in white cement mixed with pigment to match with shade of tiles over and including 15 mm thick screed bed in CM ( 1:4 ) complete all as specified and directed. Note: Colour, design and pattern shall be approved by GE(I).

M&L 2nd class HW as in plain , solid, straight chowkhats and frames , wrought , framed , rebated on the solid, rounded or chamfered, put together with glue pinned joints complete all as specified and directed.

S&F in repairs mortice lock vertical type size 100mm 2 levers of brass complete all as specified and directed. Make:- Godrej or equivalent. As approved by GE(I)

M&L for plain cement concrete type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed

Removal of dismantled/demolished unserviceable rubbish material to a distance exc 500M but not exc 1500M from the starting point complete all as specified and directed.

Demolition on stone slab or tiles any description and thickness as in floor laid bedded and pointed in cement mortar complete all as specified

M&L granite (of any type) work (table rubbed and polished) as in platforms/tops/vertical surfaces etc 16 to 18 mm thick and like in CM 1:4 including pointing with coloured cement mixed with pigment to match the shade of stone including cutting, rubbing and polishing surface and rounding off edges, to the entire over and including 15 mm thick screed/rendering in CM 1:4 complete all as specified and directed by Engineer-in-Charge.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L Brick work with fly ash bricks straight or curved on plan exceeding 6 mtr mean radius built in cement mortar 1:6 comlete all as specified and as directed.

All as per item No 60 above here in before but except bricks.including cleaning of bricks. Note : Old serviceable bricks obtained vide item no 59 above shall be reused.

Taking down cement plaster from brick wall including racking out joints, hacking for key & scrubbing down complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:4 on fair faces of concrete or brick surface finished even and smooth without using extra cement mixed wiith water proofing compound 3% by weight of cement or as per manufacturer instruction complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:6 on fair faces of concrete or brick, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 10 mm thick cement plaster on ceiling in CM 1:3 finished even and smooth without using extra cement complete all as specified and directed.

Supply only water proofing compound (ISI marked) complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls including cornices plaster etc and applying two coat oil bound distemper over a coat of primer wall over two coats of wall care putty including rubbing with sand paper to achieve a smooth surface and sharp straight edges complete all as specified and directed.

Repair to aluminium door shutter of any description including taking down and refixing with necessary adjustment to door spring/door closer, aluminium /rubber beading glass panes etc complete all as as specified and directed.

S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25mm thick aliminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required

M&L for preparation of new plastered surfaces and applying two coats of cement base paint of approved shade over a coat of cement primer on walls all as specified & directed by Engineer-in-Charge

Dismantling of steel work of any description in any positions not otherwise provided for complete

S & F steel rolling shutters complete without ball bearings 1.00 mm thickness of lath including top cover, anchoring rod, hasp and staple, guide channel and one shop coat primer, erected in position as indicated complete including taking down of the same push pull or manual type complete all as specified and directed.

S & F Ball bearing for rolling shutters complete all as specified and directed.

S & F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.

Taking down of rolling shutter of area excedding 7 sqm but not exc 12 sqm if necessary on ground, overhauling and welding etc of rolling shutters completely ( push pull or manual type) including oiling, greasing wherever is require including in guide chanel also and erected in the same position after changing of defective part if any including two coat of synthetic enemal paint over a coat of red oxide primer on steel shutter complete all as specified and directed. (Note- Defective parts shall be measured and paid separatlly as supply only under item no 77 to 83 and fixing of parts shall deemed to be included in this item )

Supply only interlocking rails matching with existing for rolling shutters complete all as specified and directed.

Supply only Ball bearing for rolling shutters complete all as specified and directed.

Supply only Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.

Supply only 1 mm thick hood cover of PGI steel sheet with necessary fixing arrangement for rolling shutters complete all as specified and directed.

Supply only lock rail including sliding locking arrangement for rolling shutters complete all as specified and directed.

Supply only spring for rolling shutters complete all as specified and directed.

Supply only MS guide rail 2 mm thick for rolling shutters complete all as specified and directed.

S&F mild steel Framed work as in doors or gates of angle or other section of GDE Fe410-0 or Fe 310-O with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

S&F Mild Steel holdfast, hook and pintle hinges, large hasp and staples, clamps, hooks for hanging fans and similar small articles conforming to Fe-290 Gde E-165 including necessary welding etc. and fixed in position.

S&F collapsible steel gate, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners brass handles etc as specified erected in position and securing runners with holdfasts and brackets complete all as specified and directed

S&F of 1.00 mm thick Mild steel, plain, black sheet in wall cladding,steel gates and similar work, cut to size, holes punched; including round headed screws,clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required

Taking up or down steel tubing and connections of 15 mm bore including cleaning for refixing or removal to store complete all as specified and directed.

All as per item No. 88 here in before but of 20 mm bore.

Re-fixing old steel tubing and connections in new or old position (wall, ceiling and floor etc) of 15 mm bore complete all as specified and directed.

All as per item No. 90 here in before but of 20 mm bore.

S&F of 15 mm bore steel tubing, medium grade, galvanised with all fitting, fixed to walls and ceiling or laid in floor complete all as specified and directed.

S&F of 20 mm bore steel tubing, medium grade, galvanised with all fitting, fixed to walls and ceiling or laid in floor complete all as specified and directed.

Cutting chases in brick walls for concealed water tubing etc and making good to facing in CM(1:3) cutting chases n exc 10 cm girth complete all as specified and as directed

.Dismantling water tanks Capacity of tank exc 250 & n. exc 500 ltrs and removing from site complete all as specified and as directed

S&F HDPE triple layer rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 500 litres capacity hoisted and fixed in position all as specified in SSR Pt-I including for hoisting into position either inside or outside of building, connecting up pipes, securing access cover etc including GI nipple of suitable size including Supplied and fixed 20mm dia PVC float valve assembly of make: Prayag/Shakti complete all as specified and directed. Make of PVC Tank : Sintex/ Dhara/Tuff/ JS Polyplast as approved by GE(I).

Dismantling water tanks exc 500 ltr and n.exc 1000 ltr and removal from site complete all as specified and directed.

S&F HDPE triple layer rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 litres capacity (White colour) hoisted and fixed in position all as specified in SSR Pt-I including for hoisting into position either inside or outside of building, connecting up pipes, securing access cover etc including GI nipple of suitable size including Supplied and fixed 20mm dia PVC float valve assembly of make: Prayag/Shakti complete all as specified and directed. Make of PVC Tank : Sintex/ Dhara/Tuff/ JS Polyplast

S & F in repair 15mm bore bib tap, fancy type long body chromium plated screwed down high pressure , with crutch or butterfly handle screwed both ends for iron pipe or for brass ferule and fixed complete all as specified and directed. Make: L&K/ Hindware/ Prayag/ Jaguar/Plumber

S & F in repair 15mm bore stop valve fancy type long shank (Concealed type) chromium plated screwed down high pressure , with crutch or butterfly handle screwed both ends for iron pipe or for brass ferule and fixed complete all as specified and directed. Make: L&K/ Hindware/ Prayag/ Jaguar/Plumber

S & F in repair 15mm bore angle cock, fancy type chromium plated screwed down high pressure , with crutch or butterfly handle screwed both ends for iron pipe or for brass ferule and fixed complete all as specified and directed. Make: L&K/ Hindware/ Prayag/ Jaguar/Plumber

S & F in repairs Pillar tap fancy type " pressure with or without letter cast copper alloy with capstan heads, chromium plated screwed down high pressure, with or without lettered 'HOT or cold with long screwed shanks and fly nuts screwed for irion pipe and fixed complete all as specified and as directed. Make: L&K/ Hindware/ Prayag/ Jaguar/Plumber

S&F in repair hand shower (health faucet) with 15 mm dia 1 mtr long flexible tube and wall hook chromium plated complete all as specified and directed. Make: L&K/ Hindware/ Prayag/ Jaguar/Plumber

S&F in repair 450 mm long PVC connection heavy duty with brass fly nut and washer complete all as specified and directed.

S&F in repairs Chromium plated brass soap dish/ tray fixed with wall complete all as specified and directed.

S&F in repairs vitreous china wash hand basin white flat back, of size 550x400 mm with and including chromium plated cast copper alloy pillar tap 15 mm dia, chromium plated cast copper alloy waste coupling and PVC waste pipe 32 mm dia of 750 mm length including mild steel brackets complete all as specified and directed. Make of WHB :- Hindware / Cera / Parryware, Make of Pillar tap : Hindware/L&K/Prayag/Jaquar/Plumber

Demolition of old existing unserviceable EWC seat and S&F vitreous china wash down water closet pan ( Pedestal pattern ),white including connection to drain (or outgoing pipe) and to flushing pipe,anti-sypohonage pipe etc. & with plastic WC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete. Make :- Hindware / Cera / Parryware

S&F in repair 10 ltrs capacity low level PVC flushing cistern, valveless, symphonic type, white,with inlet,ball float and handle including brackets complete and all as specified and directed. Make: Hindware/Cera/ Parryware

S&F in repair EWC seat cover white with all fixing arrangement suitable for cascade type EWC of any make & pattern complete all as specified and directed.

S&F in repairs brass, chromium plated toilet paper holder complete all as specified and directed.

S&F in repair 15mm dia bore Chromium plated sink cock swivel type. Make: L&K/ Hindware/ Prayag/ Jaguar/Plumber as approved by GE(I)

. S&F single peice type stainless steel gratings suitable for 100 mm dia floor trap complete all as specified and as direcred.

Ditto as per item No 112 on above but 75 mm dia floor trap

S&F in repairs 15 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe and fixed (min wt-142 gram) complete all as specified and directed. Make :Symet prayag/Shakti

S&F in repairs 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe and fixed (min wt-210 gram) complete all as specified and directed. Make :Symet prayag/Shakti

S&F in repair corner glass shelf 25 cm radius with CP bracket and railing of approved quality complete all as specified and directed.

S & F in repair looking mirror of size 600 mm x 450 X 4 mm thick glass with 5 mm thick plain PVC sheet fixed at back side and 5mm thick prelaminated PVC sheet frame around the mirror including hanging arrangement complete all as specified and directed .Make : Rajshree Plastiwood or equivalent as approved by GE(I)

S&F in repair CP towel rail 20mm dia, 60 cm long brass chromium plated with brackets complete all as specified and as directed.

S&F in repairs 25 mm dia PVC laminated mild steel conduit as in curtain rod and fixed to brackets complete all as specified and directed.

S&F in repairs fancy type mild steel brackets and side knob suitable for 25 mm dia curtain rod and fixed to wall with screws complete all as specified and as directed.

Note for all items of BOQ: Entire work listed in BOQ shall be executed in Restricted area.

N. K. ASSOCIATES

Agarwal Builders

M/S KRISHNA KAVYANSH BROTHERS

PANKAJ AND BROTHERS