Providing 1 No. conference table with executive chairs for TRAI in the 6th floor of Doorsanchar Bhavan, BSNL-CGMT office compound, Abids, Hyderabad

Amount

Supplying revolving chairs of approved make suitable to provide in the conference hall with fabric upholstered cushion seat & back, centre tilt mechanism, Gas lift/ pneumatic seat height adjustment, fixed arms, adjustable lumbar support, five pronged Nylon base with GF twin wheel castors ,seating structure with ergonomic shaped MEDIUM BACK chair, all complete as per manufacturers specification.The rate shall be quoted for the revolving chairs having broad specifications as mentioned above and as per manufacturer's specification conforming to the "Model No. ALPHA MBG FXD ARMS - PP Black" of Featherlite or equivalent or approved model in Godrej make or any other approved equivalent model in any other make/brand/ manufacturer. The model approved by the engineer in charge shall be supplied. The decision of the Engineer in charge is final and binding.

Supplying revolving chairs suitable to the conference table as Head chair of approved make with, fabric upholstered seat & back, synchrotilt mechanism, Gas lift/ pneumatic seat height adjustment , height adjustable arms, , adjustable lumbar support , five pronged Nylon base with GF twin wheel castors ,seating structure with ergonomic shaped MEDIUM BACK Mesh chair, all complete as per manufacturers specification. The rate shall be quoted for the revolving chairs having broad specifications as mentioned above and as per manufacturer's specification conforming to the "Model No. Opus MBML ADJ ARMS WITH HR " of Featherlite or equivalent or approved model in Godrej make or any other approved equivalent model in any other make/brand/ manufacturer. The model approved by the engineer in charge shall be supplied. The decision of the Engineer in charge is final and binding.

Supplying 10 Seater U - Shaped conference table of Size 3600L X 1500DX750 H mm Main table size -1500 x 600 x 750 (ht) -1 No. and add on table size 1500L x600D x 750 ht -4 No.s of approved make with the Table top: 25mm Thick pre- laminated board finished of approved shade with 2mm PVC edge lipping on all exposed edges, Under structure with MS Powder coated Perform legs (50x50) and supporting on MS powder coated cross beams (40x20), Modesty with 18mm thick PLT Modesty Panel of 450mm Ht, Wire Management with Anodised Finish 5 nos Flip up box 450 x 150 with soft closures, without sockets and switches are provided, PVC Cable Dump & vertical cover is considered for wire entry from the floor to the table top, etc., all complete as per manufacturers specification of approved make. The rate shall be quoted for the conference table having broad specifications as mentioned above and as per manufacturer's specification of of Featherlite or equivalent or approved model in Godrej make or any other approved equivalent model in any other make/brand/ manufacturer. The model approved by the engineer in charge shall be supplied. The decision of the Engineer in charge is final and binding.

Supplying visitors chairs for offices with fabric upholestered CUSHION seat & Back with arms and with black powder coated 4 legs etc., all complete as per manufacturers specification and as directed by the Engineer in charge.The rate for visitors chairs having broad specifications as mentioned above and as per manufacturer's specification conforming to the "Model No. Bodyline visitor-V-1A" of Featherlite or equivalent or approved model in Godrej make or any other approved equivalent model in any other make/brand/ manufacturer. The model approved by the engineer in charge shall be supplied. The decision of the Engineer in charge is final and binding.

Supplying GLASS TOP RECTANGLAR CENTRE TABLE of size 1200 x 770 x 330mm height with frame and legs etc., all complete as per manufacturers specification.The center table having broad specifications as mentioned above and as per manufacturer's specification conforming to the "Model CLARKSON" of Featherlite or equivalent or approved model in Godrej make or any other approved equivalent model in any other make/brand/ manufacturer. The model approved by the engineer in charge shall be supplied. The decision of the Engineer in charge is final and binding.