Construction of Boundary wall and provision of 2 no. motor operator and 2 no. security guard for operation of OL-38 ex km 85.47 of CLMC.

Earthwork in excavation in foundation trenches in ordinary soil (vide classlflcatlon Of soil Item-A)and disposal of excavated earth as Obtained ( 50M away from the edge of the trenches) with initial lead of 150M and initial lift of 1.5m as specification and direction of E/I. [WRD 6.1.8]

Extra for earth work in hard soil (Vide classification of soil item-B) all complete as per specification and direction of E/A. (WRD 6.1.9)

Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lift including cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/I.(Mode of measurement compacted volume) [ BCD 5.1.10]

Providing desigation 75A one brick flat soling joints filled with local sand Including cost of watering taxes royalty all complete as per building specification and direction Of E/l. [ BCD 5.6.1]

Providing and laying in position cement concrete of M10 excluding the cost of centering and shuttering-All work upto plinth level 1:3:6 (1 cement:3 coarse sand Zone-lll:6 graded stone aggregate 20 mm nominal size) [BCD 5.3.1.4]

Providing and laying In position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement-all work upto plinth level.1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) [BCD 5.3.9.1]

Providing designation 75A Brick work in C.M. (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and directionof E/I.[BCD 5.2.10]

Providing 12mm. Thick cement plaster (1:4) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. [JH-BCD-SOR- 5.7.2]

Providing 25mm. Thick cement plaster (1:4) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. [JH-BCD-SOR- 5.7.12]

Centering and shuttering including strutting propping etc. and removal of form for foundation,footing,bases of column for mass concrete. (BCD 5.3.17.1)

Finishing walls with Acrylic Smooth exterior paint of required shade:New work ( Two or more coat applied @1.43 ltr/10 sqm over and including priming coat of exterior primer applied @0.90 litre/10 sqm [DSR 2023 13.46.1]

Earth work in filling foundation trenches and back filling of structures in layer not exceeding 150mm. Thick well watered, rammed and fully compacted and finely dressed with suitable earth obtained from excavation of foundation trenches ad placed in a suitable profile within a lead of 30M and 1.5M complete job as specification and direction of E/I (WRD.7.1.31)

Providing Tor steel reinforcement of 10mm dia bars as per approved design and drawing with cutting, bending and binding with annealed wire with cost of wire removal of rust, placing the rods in position . all complete as per building specification and direction of E/I.(a) 10mm ( TMT Fe 500){Only valid for Tata (Tiscon),SAIL,JSPL,Electrosteel SteelsLtd.Bokaro and Vizag (RINL [JH-SOR-BCD-Part B- 5.5.5 (a) ]

Providing Tor steel reinforcement of 12mm dia bars as per approved design and drawing with cutting, bending and binding with annealed wire with cost of wire removal of rust, placing the rods in position . all complete as per building specification and direction of E/I.(a) 12mm ( TMT Fe 500){Only valid for Tata (Tiscon),SAIL,JSPL,Electrosteel SteelsLtd.Bokaro and Vizag (RINL [JH-SOR-BCD-Part B- 5.5.5 (b) ]

Providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing with cutting, bending and binding with annealed wire with cost of wire removal of rust, placing the rods in position . all complete as per building specification and direction of E/I. TMTFe 500{Only valid for Tata (Tiscon),SAIL,JSPL,Electrosteel SteelsLtd.Bokaro and Vizag (RINL [JH-SOR-BCD-Part B- 5.5.4 ]

Supplying fitting and fixing M.S. Grill gate with M.S. grills made of 20 x 6 mm M.S. flats or 16 mm M.S. square bars fitted on 25 x 25 x 6 mm M.S. Angle frame of size 60 x60 x 6 mm including cost of fabrication, providing necessary locking arrangement with haskal and dommy duly fixed in P.C.C. (1:2:4) blocks of required size , applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I. (When steel is not supplied by the deptt.)(SOR 5.5.30)

Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning removing dusts , dirt,scales,smokes and grease and cleaning the surface throughly, scaffolding and taxes all complete as per building specification and direction of E/I. (S.R. - 5.8.41)

Providing two coat of painting with ready mixed paint of approved shade and make over steel surface including cleaning the surface throughly, scaffolding and taxes all complete as per building specification and direction of E/I. (S.R. - 5.8.43)

Provision of two number Pump Driver/Pump Operator,class - II(semi skilled) for operation of OL - 38

Provision of two number Security Guard( Unskilled Labour ) for Pump House of OL - 38

Providing and laying P.C.C. or R.C.C. M-150 with normal mix of (1:2:4) in foundation of various components of canal or embankment structures with approved quality of 20mm graded coarse aggrergate of required grade (as per design) and approved quality of sand of sand of requisite F.M.(2.5 to 3.0) washed and screened including necessary tools nand plants, vibrating, curing royalty and all taxes etc. excluding cost of form work as well reinforcement its cutting bending, binding and placing complete job as per specification and direction of Ε/Ι.BCD (5.3.1.2)

Providing and laying P.C.C. or R.C.C.M150 with normal mix of (1:2:4) in superstructure of various components of retaining walls,return walls,wall(any thickness) including attached plasters,columns,piers,abutment,pillars,post, struts ,buttresses,string with approved quality of 20mm graded coarse aggrergate of required grade (as per design) and approved quality of sand of sand of requisite F.M.(2.5 to 3.0) washed and screened including necessary tools nand plants, 4 vibrating, curing royalty and all taxes etc. excluding cost of form work as well reinforcement its cutting bending, binding and placing complete job as per specification and direction of Ε/Ι.BCD(Item no 5.3.2.2)

Providing shuttering including stutting proping etc. and its removal after use in foundation as per specification and direction of E/1.(7.3.18)

Providing shuttering including stutting proping etc. and its removal after use in various components of canal structure or embankment structure as per specification and direction of E/I.(7.3.19)

Providing 1.5mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/I.(5.7.11)

Providing weep hole with dry graded stone filter of 20 mm to 40 mm size in abutment and wing wall as per building specification and direction of E/I.[JH. COMMON SOR PART -A 6.7.6 ]

.Cost of carriage of materials : .Cement (67 km) From Jamshedpur to worksite

Sand (24 km) From Swarnrekha to worksite

Stone Chips (68 km) From Hata to worksite

Steel (67 km) From Jamshedpur to worksite

Brick (8 km)

Add GST @18%

Add Labour Cess @1%

Please Enable Macros to View BoQ information