ADDN/ALTN TO CERTAIN SMQ AT AF STN CHANDIGARH UNDER GE (AF) CHANDIGARH.

Amount

Note :The unit rate quoted by the tenderer under Col No (13) of Sch `A’ (BOQ) unless specifically mentioned otherwise such as labour only/fixing only, for all items of works shall be deemed to be including cost of all materials, labour, tools and plants, testing and commissioning of work in position complete as required for entire completion of work.

Plain cement concrete ,25 mm average thickness (1:2:4) type B-0, using 12.5 mm graded mechanically crushed stone aggregates as in levelling course finished even & rough without using extra cement , complete all as specified and directed by Engineer-in-Charge.

Plain cement concrete 75 mm thick, 1:3:6, type C-2, using 40 mm graded mechanically crushed stone aggregates, laid in 1:20 slope as in plinth protection/court yard including making joints at 3.00 metre intervals and at each corner, the joint shall be filled with mastic filling (to full depth) comprising of one part heated hot blown bitumen 85/ 25 & two parts heated sand (by volume), surface finished even and fair in and including demolition of unreinforced cement concrete in ground floors and paving n.exc 15cm thickness (below or above ground level) and removal of rubbish outside MoD land , complete all as specified and directed by Engineer-in-Charge. Note :Quoted rates are inclusive of use and waste of formwork and to devide the area in panels.

Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement sand mortar 1:6 complete in and including demolition of brickwork or stone boulder masonary built in cement mortar including all quoins, arches, pillars etc for area where servicable bricks retrived and removal of rubbish outside MoD land ,complete all as specified and as directed by Engineer -in-Charge.

First quality glazed ceramic coloured tiles of 450x300x7-8 mm thick laid on vertical surfaces such as skirting, dados and risers to steps etc laid over and including 10mm thick cement plaster in CM (1:4) set and jointed in neat cement paste of honey like consistancy and pointed in white or coloured cement to match the shade of tiles in and including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removal of rubbish outside MoD land ,complete all as specified and as directed by Engineer -in-Charge. Note : Design, pattern and colour of tiles will be as approved by GE.

First quality, Non skid ceramic coloured tiles, 7 to 8 mm thick joint free (square/ rectangular) area of each tile exceeding 0.11 Sq.m but not exceeding 0.18 Sq.m, laid in floors with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed of cement mortar (1:6) including pointing in white or coloured cement to match the shade of tiles in and including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removal of rubbish outside MoD land ,complete all as specified and as directed by Engineer -in-Charge. Note :- Design, pattern and colour of tiles will be as approved by GE.

Vitrified ceramic tiles (light Shade) 9 to 10 mm thick (square/ractangular) coloured polished tiles, area of each tile not exceeding 0.36 sqm laid in floors with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed of cement mortar (1:6) including pointing in white or coloured cement with pigment to match the shade of tiles in and including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removal of rubbish outside MoD land ,complete all as specified and as directed by Engineer -in-Charge.

Vitrified ceramic tiles (light Shade) 9 to 10mm thick (square/ractangular) coloured polished tiles, area of each tile not exceeding 0.36 sqm as in skirting, dados and risers to steps etc laid over and including 10mm thick cement plaster in CM (1:4) set and jointed in neat cement paste of honey like consistancy and pointed in white or coloured cement with pigment to match the shade of tiles in and including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removal of rubbish outside MoD land ,complete all as specified and as directed by Engineer -in-Charge.

Demolition of stone slab and tiles of any description or thickness in floors, aprons etc, laid bedded and pointed in cement mortar and removal of rubbish outside MoD land ,complete all as specified and as directed by Engineer -in-Charge.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3.0kg of cement per sq. metre ,complete all as specified and as directed by Engineer -in-Charge.

Machine cut Mirror polished Kota stone slab flooring of 18-20 mm thick laid over 15mm thick screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab ,complete all as specified and as directed by Engineer -in-Charge. Notes :(i) Rate of kota stone flooring includes for all cutting and waste including machine cutting to make it square or rectangular. (ii) The quoted rate is inclusive for polishing by machine. (iii) Kota stone to be fixed in staircase Treader shall be of single piece.

Machine cut Kota stone slab of 18-20 mm thick as in risers of steps skirting, dado and pillar etc laid over 10mm thick cement plaster in CM (1:4) and jointed with grey cement slurry, mixed with pigment to match the shade of the slab including rubbing and polishing ,complete all as specified and as directed by Engineer -in-Charge. Notes :(i) Rate of kota stone flooring includes for all cutting and waste including machine cutting to make it square or rectangular. (ii) The quoted rate is inclusive for polishing by machine. (iii) Kota stone to be fixed in staircase Riser shall be of single piece.

Machine cut Kota stone slab of 18-20 mm thick as in landing etc laid over 10mm thick cement plaster in CM (1:4) and jointed with grey cement slurry, mixed with pigment to match the shade of the slab including rubbing and polishing ,complete all as specified and as directed by Engineer -in-Charge. Notes :(i) Rate of kota stone flooring includes for all cutting and waste including machine cutting to make it square or rectangular. (ii) The quoted rate is inclusive for polishing by machine. (iii) Kota stone to be fixed in Landing shall be of single piece.

Granite (of any type ) 16-18 mm thick, work (table rubbed and polished) fine grained 'Z' black/red in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including screed bed of 15 mm thick in CM 1:4 ,complete all as specified and as directed by Engineer -in-Charge.

Rendering 15 mm thick plaster on brick work or concrete external surfaces in cement mortar (1:6) , finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge.

Rendering 15 mm thick plaster on brick work or concrete internal surfaces in cement mortar (1:4) , finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge.

Rendering 15 mm thick on brick work or concrete internal surfaces in cement mortar 1:6 finished even and smooth without using extra cement in and including taking down cement plaster on brick walls & concrete surfaces & the like including raking out joints, hacking for key, scrubbing down with water etc., any description, and removal of rubbish outside MoD land , complete all as specified and directed by Engineer-in-Charge.

Rendering 15 mm thick on brick work or concrete External surfaces in cement mortar 1:4 finished even and smooth without using extra cement in and including taking down cement plaster on brick walls & concrete surfaces & the like including raking out joints, hacking for key, scrubbing down with water etc., any description, and removal of rubbish outside MoD land , complete all as specified and directed by Engineer-in-Charge.

Rendering 10 mm thick in cement mortar (1:3), as on concrete surfaces (such as top & bittom of chajjas, beams, roof projection,balcony ,Mummty and stair case flight ceiling ,roof slab ceiling etc.) finished the surfcae even and smooth without using extra cement , complete all as specified and directed by Engineer-in-Charge. Notes for item No. 14 to 18: (i) Quoted rate shall be deemed to include for necessary scaffolding for building upto 9.00m high (Ground+2 storey building). (ii) All safety measures for the safety of workers shall be ensured by contractor before execution of work. Insurance of workers shall be got done by contractor before execution of the work and the cost for the same shall be deemed to be included in rate quoted by contractor.

Rendering 15 mm thick plaster (1:3) in cement sand mortar with integral water proofing compound for repair of distressed RCC member including scaffolding for suitable working platform as in column, beams,chajja and roof projection, facia by using chicken wire mess, finishing the surfaces even and smooth without using extra cement with water proofing compound as per manufacturers instruction @3% of cement weight, in and including taking down cement plaster on brick walls & concrete surfaces & the like including raking out joints, hacking for key, scrubbing down with water etc., any description, and removal of rubbish outside MoD land , complete all as specified and directed by Engineer-in-Charge. Notes : (i) Rendering should be done in two layers . First Layer 10mm thick and Second layer 5 mm thick after over wire netting of galvonised mild steel wires of 0.91mm dia and average size of wire mess 20mm fixed with tinned tacks. (ii) Removing all disintegrated and loose portion and cleaning the rust from exposed reinforcement, removing, rusted scales by chipping and cleaning by wire brushes. (ii) Quoted Rate of above item is inclusive the cost of WPC and nothing extra shall be admissible on this account.

Preparation of new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer including 1mm thick wall care putty interior grade to smoothening the surface by using sand paper , complete all as specified and directed by Engineer-in-Charge.

Complete removal of existing treatment of internal surfaces of walls including brooming down or steel wire brushing scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc; washing, rubbing down and stopping of surfaces using sand paper and applying two coat of oil bound distemper including 1mm thick Walll care putty and smoothing the surface, complete all as specified and directed by Engineer-in-Charge.

Preparation of old surfaces of ceiling including brooming down or steel wire brushing, scraping down smoke soot, moulds, mooss and efflorescent salts and trading oil and greasy spots etc and filling the cracks/holes with cement wall care putty and applying Two coats of white wash, complete all as specified and directed by Engineer-in-Charge.

Preparation of old plastered surfaces of ceiling including brooming down or steel wire brushing scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc; washing, rubbing down and stopping of surfaces using sand paper etc and filling the cracks/holes with cement wall care putty and applying two coats of oil bound distemper , complete all as specified and directed by Engineer-in-Charge.

Preparation of old painted wooden surfaces over 10cm width or grith not otherwise described and applying two coats of synthetic enamel paint ,complete all as specified and directed by Engineer-in-Charge.

Preparation of old painted steel or Iron surfaces over 10cm width or grith not otherwise described and applying one coat of synthetic enamel paint , complete all as specified and directed by Engineer-in-Charge. Note For Ser Item No. 20 to 25:- The rates quoted against those items shall being to be included for the use of scafolding, ladders, cradles etc, up to triple storey building, removing nails, making good holes, cracks etc removing furnitures, cub boards, washing floors, floor and wall tiles,cleaning glasses, joinerys, electric fittings, wiring, conduits etc of drops, splashes and living premises clean and tidy upto entire satisfaction of Engineer-in-Charge,

Complete removal of existing treatment of old plastered /unplastered surfaces of walls by mechanically boomer and preparing plastered or unplastered old surfaces of walls including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and filling the cracks/holes with wall care putty to rubbing down and stoping of surfaces using sand paper and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/ litre and UV resistance as per IS 15489: 2004, alkali & fungal resistant, dirt resistant exterior paint of required shade as approved with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm including , complete all as specified and directed by Engineer-in-Charge.

Preparation of newly plastered /unplastered surfaces of walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/ litre and UV resistance as per IS 15489: 2004, alkali & fungal resistant, dirt resistant exterior paint of required shade (Company Depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm for building upto Ground+2 storey high, complete all as specified and directed by Engineer-in-Charge. Notes for item No. 26 to 27: (i).Weather proof exterior emulsion paint and primer shall be of same manufacturer. (ii)Quoted rate shall be deemed to include for necessary scaffolding for building upto Ground+2 storey high. (iii) All safety measures for the safety of workers shall be ensured by contractor before execution of work. Insurance of workers shall be got done by contractor before execution of the work and the cost for the same shall be deemed to be included in rate quoted by contractor.

Taking down Chowkhats with shutters without taking of shutter from the frame of any description not exceeding 1.50 Sq. m each, and making good the disturbed surface with PCC 1:2:4 type B-0 and CM 1:4 & finished with similar specification as exists, complete all as specified and as directed by the Engineer-in-Charge.

Taking down Chowkhats with shutters without taking of shutter from the frame of any description exceeding 1.50 Sq. m but not exceeding 4.00 Sq. m each, and making good the disturbed surface with PCC 1:2:4 type B-0 and CM 1:4 & finished with similar specification as exists, complete all as specified and as directed by the Engineer-in-Charge.

Pressed steel frames of size 105 x 60 mm, made out of 1.25mm thick sheet for doors with one or more rebates including necessary fixing lugs, hinges (mild steel butt hinges medium weight, cold rolled, 100 mm, ISI marked), lock strike plate, etc., including one shop coat of primer.with and including back filling PCC (1:3:6), type C-0,complete all as specified and directed by the Engineer in Charge. Note :Cost of filling hollow of frame with plain cement concrete shall be included in the quoted rate and nothing extra shall be admissible on this account .

Pressed steel frames of size 165 x 60 mm, made out of 1.25mm thick sheet for doors with one or more rebates including necessary fixing lugs, hinges (mild steel butt hinges medium weight, cold rolled, 100 mm, ISI marked), lock strike plate, etc., including one shop coat of primer.with and including back filling PCC (1:3:6), type C-0,complete all as specified and directed by the Engineer in Charge. Note :Cost of filling hollow of frame with plain cement concrete shall be included in the quoted rate and nothing extra shall be admissible on this account .

35 mm thick (Batten thickness) Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive wire cloth, glass etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, wire cloth etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats,complete all as specified and directed by the Engineer in Charge.

35 mm thick factory made Flush shutters ,solid core construction with block board core and plywood face panels commercial type on both sides, duly provided with 6mm thick Teakwood leeping on edges alround, fitted to chowkats, , complete all as specified and as directed by Engineer-in- Charge.

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows/Cup Board & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length , complete all as specified and directed by the Engineer in Charge. Note:M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately.

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65x125mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length ,complete all as specified and directed by the Engineer in Charge. Note:M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately.

Factory made single extruded WPC (Wood Polymer Composite) solid plain door shutter of size 30 MM thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisturproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws ,complete all as specified and directed by Engineer-in- Charge. Note: stainless steel butt hinges and necessary S.S screws shall be paid separately.

Factory made 30 MM thick 100% solid WPC (Wood Ploymer Composite) plain wiremesh door shutter of required size comprising of virgin PVC resin polymer of K value 57-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives made from extrusion procecess WPC foam sheet single exttruded(Inner) with having minimum density not less than 650 kg/cum of density and screw withdrawal strength of 2000 N (Face) & 1100 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisturproof and fire retardant. For fixing Mosquito mesh and XTN aluminimium mesh combinly panel area of door exceept stiles and rails to be panelled with mesh with self tapping round headedscrews at required distence, scres and edges covered with body theareted PVC edge beading all arround of mesh and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws in and including dismantling of existing frame, ,complete all as specified and directed by the Engineer in Charge. Note:M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately.

Factory made single extruded WPC (Wood Polymer Composite) solid plain flush type as in shutter or exposed member of cupboard shutter of 18mm thick with Balancing on one face and wooden grain pattern lamonation on exposed surface with and including 18 mm wide 0.8 to 1 mm thick PVC leaping on exposed face to match with shade of shutter fixed with suitable solvent comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant, in and including dismantling of old board/Cup board shutter any description fixed in any postion with nails ,complete all as specified and directed by Engineer-in- Charge.

Aluminium powder coating (minimum thickness of powder coating 50 micron of approved colour) three track window (two shutters glazed & one shutters wiregauge) with frame, glazed with 4 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in position, concealed type lock for all three shutter, PVC roller etc all as specified below, including taking down old window , complete all as specified and directed by the Engineer in Charge. Section no are as under : (a) Frame (top & side) section shall be of size 92.00 x 31.75 x 1.50 mm (Section No 20831) (b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.50 mm (Section No 20832) (c) Top & side Members of shutter Section shall be of size 18.00 x 40.00 x 1.55 mm (Section No 20738) (d) Shutter Interlock Section shall be of size 18.00 x 40.00 x 1.45 mm (Section No 20737) (e) Bottom Members of shutter section shall be of size 18.00 x 40.00 x 1.55 mm (Section No 20736) Note: Section numbers mentioned in this item are of Jindal Make, contractor may use similar section of other make mention in Appx B.

Aluminium powder coated (minimum thickness of powder coating 50 micron of approved colour) ventilator, partialy glazed and partialy louvers, outer frame & mullion fabricated with aluminium section of size 82.50mm x 38.00 mm x 1.70 mm thick (Cat No 20036), half portion glazed with 4 mm thick frosted glass including rubber beading, & glazing clip, half portaion louvers of 80 mm wide & 4 mm thick frostade glass including aluminium louver patti including SS wire gauge of fixing of 0.36mm dia and 1.40 width of aparture with 25x3mm think aluminium strip with screw to upper half portion of ventilator all fitting & fixture and fixed in position including taking down old ventilator , complete all as specified and directed by the Engineer in Charge. Note: Section numbers mentioned in this item are of Jindal Make, contractor may use similar section of other make mention in Appx B.

Butt hinges 100 mm size ,heavy duty, stainless steel hinges fixed with stainless steel screw ,complete all as specified and directed by the Engineer in Charge.

Barrel tower bolts aluminum anodizes of extuded section and fixed of 150 mm long size (length of bolt) , complete all as specified and directed by Engineer-in-Charge

Barrel tower bolts aluminum anodizes of extuded section and fixed of 125 mm long size (length of bolt) , complete all as specified and directed by Engineer-in-Charge

Handles 'D' type of size 125 mm ,Aluminium , cast type, anodised,complete all as specified and directed by Engineer-in- Charge.

Handles 'D' type of size 150 mm ,extruded aluminium alloy , fabricated type anodized , complete all as specified and directed by Engineer-in-Charge

Handles 'D' type of size 125 mm ,extruded aluminium alloy , fabricated type anodized ,complete all as specified and directed by Engineer-in- Charge.

Aluminum alloy, anodized, sliding door bolt with hasp staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed length of bolt 250 mm, bolts not less than 12mm dia with and including a minimum of 6 bolts not,four on bolt plate and two on staple plate complete (ISI marked ) , complete all as specified and directed by Engineer-in-Charge

Continuous (Piano) hinges, width of flaps (when open ) 30mm, stainless steel bright finish or electro galvanised, ISI Marked ,complete all as specified and directed by Engineer-in- Charge.

Hasp & staple of 100mm size ,safety type aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws ,complete all as specified and directed by Engineer-in- Charge.

Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor of overall length of cover plate 140mm , complete all as specified and directed by Engineer-in-Charge.

300mm long ordinary rat tail rod pattern MS door springs including roller and roller plate , complete all as specified and directed by Engineer-in-Charge

M S work as Framed works such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes,framed guard bars barred iron doors ladders, framed balusters walk ways railing, framed work of water tanks, framed and hung as gates including pintle hinges, stops, hand made sliding sliding bolts etc ,drilling bolting or reveting etc and similar work conforming Fe-290 Gde E-165 ,complete all as specified and directed by Engineer-in- Charge.

Preparation of new or previously untreated wooden surfaces of any description , not otherwise described over 10 cm width or girth and applying two coats of synthetic enamells paint over one coat of pink primer ,complete all as specified and directed by the Engineer in Charge.

Preparation of new or previously untreated steel surfaces of any description , not otherwise described over 10 cm width or girth and applying two coats of synthetic enamells paint over one coat of red oxide primer,complete all as specified and directed by the Engineer in Charge.

Cutting chases, pinning in making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing and making good, cutting not exceeding 10cm girth, and removal of rubbbish outside MOD land,,complete all as specified and directed by Engineer-in- Charge.

Steel water tubing, 15 mm bore medium grade ISI Marked, galvanized with all fittings and fixed complete to walls, ceiling or laid in floors in and including taking up or down existing unservicable tubing and connections, cleaning for re fixing or removal to store, complete all as specified and directed by Engineer-in-Charge. Note: Fittings & specials as required shall be provided by the contractor. Contractor's rate shall be deemed to include the cost of fittings provided.

Steel water tubing, 20 mm bore medium grade ISI Marked , galvanized with all fittings and fixed complete to walls, ceiling or laid in floors in and including taking up or down existing unservicable tubing and connections, cleaning for re fixing or removal to store, complete all as specified and directed by Engineer-in-Charge. Note: Fittings & specials as required shall be provided by the contractor. Contractor's rate shall be deemed to include the cost of fittings provided.

Rotational moulded PVC, tripple layered, water storage tanks of capacity 500 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position, with & including all fittings such as GI tank nipple etc. including Ball valve high pressure of PTMT with epoxy coated aluminium door and highdensity plastic ball screwed for 20mm dia iron pipe and fixed (minimum wieght 20mm 210gms )in and including dismantling PVC water tanks exc 251 ltr but n. exc 500 ltr capacity by disconnecting existing water connection and removal from site ,complete all as specified and directed by Engineer-in- Charge.

Stop cock regular body with flange, 15 mm bore fancy type chromium plated (concealed type) cast copper alloy, screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed as in repair, complete all as specified and directed by Engineer-in-Charge.

Angle cock, 15 mm bore fancy type chromium plated cast copper alloy, screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed as in repair, complete all as specified and directed by Engineer-in-Charge.

Bib cock long body with flange,15 mm bore fancy type cast copper alloy Chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed as in repair, complete all as specified and directed by Engineer-in-Charge.

Brass chromium plated shower rose 125mm with shower arm 15mm size, 195mm long with bend of 45 degree with flange including fixing to steel pipe or union fixed as in repair , complete all as specified and directed by the Engineer in -Charge. Note for Srl Item No 60 to 63:-The quoted rates against these items shall deemed to be included for replacement of damaged GI/Kitec fitting such as socket, elbow,nipple and tee of required size ,fitted/connected and making good any leakage. Nothing extra shall be admissible on this account.

Brass CP central hole basin mixer with 450mm braided connection pipe (without pop-up) for mixing hot & cold water for 15mm bore iron pipe and fixed as in repair, complete all as specified and directed by Engineer-in-Charge.

Sink mixer swan neck counter top ,15 mm bore of brass chromium plated for mixing hot & cold water screwed down for iron pipe for 15 mm bore pipe and fixed as in repair including making good the disturbed surfaces, complete all as specified and directed by the Engineer in -Charge.

Wall mixer with L bend (provision for over head shower), cast copper alloy, chromium plated for mixing hot and cold water, screwed down for 15mm bore iron pipe , complete all as specified and directed by Engineer-in-Charge.

Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed for 20 mm bore dia fixed as in repair , complete all as specified and directed by the Engineer in -Charge.

Wash basins ,vitreous china, white,rectangular type of size 550x400mm including brackets and cutting for and pinning in ends of brackets or erecting stand 32mm dia Waste fittings, brass, chromium plated for glazed basins with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed inluding new brackets fixed as in repair , complete all as specified and directed by the Engineer in -Charge.

Vitreous China squating pan, 'Orissa' pattern, size 580x440mm white, with integral foot rests, including 100mm cast iron 'P' or 'S' trap and 100mm cast iron sanitary connection socket to fit WC outlet including connection to trap, to flushing pipe, anti-syphonage pipe etc. complete including making good to floor fixed as in repair , complete all as specified and directed by the Engineer in -Charge. Note :- Qty and Rates are inclusive of for both P type and S type Traps as on actual required basis on ground

Vitreous China wash down water closet pan (pedestal pattern), white with plastic seat cover (excluding fixing bolts, flushing cistern and flush pipe) including connection to trap,and to flushing pipe, anti-syphonage pipe,etc including 100mm cast iron 'P' or 'S' trap complete including making good to floor fixed as in repair , complete all as specified and directed by the Engineer in -Charge. Note :- Qty and Rates are inclusive of for both P type and S type Traps as on actual required basis on ground

PVC valveless , syphonic action type flushing cisterns 10 ltrs capacity , low level , white, with inlet ball valves , float and handle including brackets and pvc flush pipe 32 mm dia for low level fixed as in repair , complete all as specified and directed by the Engineer in -Charge.

PVC connections 15mm size with PTMT nuts of length 600 mm fixed as in repair , complete all as specified and directed by the Engineer in -Charge.

Hand shower (Health foucet) (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position fixed as in repair , complete all as specified and directed by the Engineer in -Charge.

PVC waste pipe flexible for Sink/ WHB of 32mm size fixed as in repair , complete all as specified and directed by the Engineer in -Charge.

Soap dish brass, chromium plated fancy type fixed to plugs with chromium plated brass screws. fixed as in repair,complete all as specified and directed by Engineer-in- Charge.

Rectangular Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long fixed with PVC rawl plugs and wooden screws fixed as in repair,complete all as specified and directed by Engineer-in- Charge.

Corner glass shelf of radius 300 mm including 02 Nos. metallic holding brackets, railing etc. fixed with PVC rawl plugs and wooden screws fixed as in repair,complete all as specified and directed by Engineer-in- Charge.

CP grating 125 mm dia/hinged of brass and fixing with cement mortar 1:3 with/without holes as required fixed as in repair,complete all as specified and directed by Engineer-in- Charge.

Towel rail 600 mm long, 20 mm dia, ‘D’ type, brass chromium plated, fixed to walls with screws and plastic cleats fixed as in repair,complete all as specified and directed by Engineer-in- Charge.

Sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm fixed as in repair,complete all as specified and directed by Engineer-in- Charge.

Drapery rod of Stainless steel 25mm dia, fancy type, any shade, in and including set of fixing brackets, fixed to wall with stainless steel finols/finnels, connected accessaries, rubber packing, required screws and PVC rawal plugs as required fixed as in repair ,complete all as specified and directed by Engineer-in- Charge.

PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to wall including holding holder /clamps and making good the mouth of rain water pipe in and including taking down eaves gutter and rainwater pipes any dia (any size or pattern), including all fittings ,complete all as specified and directed by Engineer-in- Charge.

PVC (SWR) bends /Tee, shoe any radius, fixed with solvent cement in any position as per site requirement any radius 110mm bore fixed with solvent cement in any position as per site requirement fixed as in repair , complete all as specified and directed by Engineer-in-Charge.

Cast iron soil, waste and vent pipe ,75 mm bore of spun pipe in any length with or without ears, with cement joints laid in trenches or wall in and including dismantling of cast iron work of any description,complete all as specified and directed by Engineer-in- Charge.

Cast iron soil, waste and vent pipe ,100 mm bore of spun cast pipes in any length with or without ears, with cement joints laid in trenches or wall in and including dismantling of cast iron work of any description,complete all as specified and directed by Engineer-in- Charge.

Cast iron cowel 75mm dia bore, ISI markedincluding jointing with solventin any postion as per site requirment ,complete all as specified and directed by Engineer-in- Charge.

Cast iron branch pieces 75mm dia bore, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches ,reducers fixed as in repair,complete all as specified and directed by Engineer-in- Charge.

Cast iron branch pieces 100mm dia bore, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches ,reducers fixed as in repair,complete all as specified and directed by Engineer-in- Charge.

Cast iron floor trap, 75mm dia of out let, ISI marked, with stain less Steel grating, excluding jointing to waste pipe in Plain cement concrete (1:2:4) type B-1 fixed as in repair,complete all as specified and directed by Engineer-in- Charge.

Cast iron floor trap, 100mm dia of out let, ISI marked, with stain less Steel grating, excluding jointing to waste pipe in Plain cement concrete (1:2:4) type B-1 fixed as in repair ,complete all as specified and directed by Engineer-in- Charge.

Cast iron reducer, 110mm including jointing with solvent cement in any position as per site requirment ,complete all as specified and directed by Engineer-in- Charge.

Dismantling the entire roof covering including brick tiles/ concrete tile of any thickness, mud phuska, mud plaster and water proofing treatment any number of layers or thickness etc. of any description upto RCC roof slab and cleaning the surface including flashings and junction of parapets, etc. with wire brushes and water to the entire satisfaction of Engineer-in-charge including removing the retrieved material to a place fixed by civic body and applying neat cement slurry @ 3.00 kg/ Sqm , complete all as specified and directed by Engineer-in-Charge. Notes:- (i) The quoted rate shall deemed to be included for necessary temporary arrangement of water supply from existing connection to toilets, bathrooms and kitchen for convenience of the occupants staying in quarters until completion of entire roof treatment and no any extra payment (ii) Dismantled material should be removed manually using stair all as directed by Engineer-in-Charge.

Plain cement concrete, 1:2:4) type B-0 , using 12.5 mm graded mechanically crushed stone aggregates as in roof kerb or mud stops in and including mixed with acrylic base liquid water proofing compound s per manufacturer’s instructions including all necessary formwork ,complete all as specified and directed by Engineer-in-Charge. Notes:-(i) Quoted Rate of above item is inclusive the cost of WPC and nothing extra shall be admissible on this account. (ii) Use and waste of form work shall deemed to be included in the quoted rate .

Plain Cement concretek type B-1, 1:2:4 by using 20mm graded mechanically crushed stone aggregate as in roof padding to maintain the required slope or to prepare gola etc icluding weathering slightly ropunded or chamfered angles and throating as directed in and including mixed with acrylic base liquid water proofing compound s per manufacturer’s instructions including necessary form work in and including demolition of (un-reinforced) cement concrete of any description or as roof padding and coveringg concrete in any position not otherwise specifically provided for and remove all the debris out of MoD land , complete all as specified and directed by Engineer-in-Charge. Notes:-(i) Quoted Rate of above item is inclusive the cost of WPC and nothing extra shall be admissible on this account. (ii) Use and waste of form work shall deemed to be included in the quoted rate . (iii) Contractor shall provide leveling bench mark at ridge level and up to edges with distances as specified by Engineer in Charge

Rendering 10 mm thick in cement mortar (1:4), as on fair faces of concrete surfaces (when concrete is green) finished the surfcae even and fair without using extra cement mixed with liquid water proofing compound as per manufacturer’s instructions, complete all as specified and directed by Engineer-in-Charge. Note:- Quoted Rate of above item is inclusive the cost of WPC and nothing extra shall be admissible on this account.

Preparation of newly plastered/RCC surfaces, making the surface completely dry and applying a coat of bitumen primer, having density in range of 0.87 to 0.89 kg/litre at 25 degree centigrade and viscosity of 70 to 160 CPS, manufactured by same manufacturer @ 0.4 ltr/sqm shall be applied and after drying of primer for 24 hours apply APP modified prefabricated water proofing membrane with non - woven polyster reinforcement, 3mm thick superior multipolymeric, weighing not less than 3.00 kg/sqm with properties of high penetration and centre core consisting of 90 micron high molecular high density polyetylene (MHHDPE) film consisting of five layers laid with torching application to the surface comeplete and sealing the side as well as end laps with torch (overlaps should not be less than 10cm in longitudinal direction and 15cm in traverse direction and shall be bonded with bitumen primer and levelled by heating the overlaps with brutane torch) , complete all as specified and directed by Engineer-in-Charge.

Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner ,complete all as specified and directed by Engineer-in- Charge.

Uprooting completely natural vegetation/ plants, stems of trees (upto 30cm girth) grown up on walls, parapets or in roof or any part of building upto 10 metre (Ground +2 storey) and making good the damaged/ disturbed portion and filling holes in cement mortar (1:3) or PCC (1:2:4) type B-0 using graded crushed stone aggregate to match with the existing surface , complete all as specified and directed by Engineer-in-Charge.

Plain Cement concrete type B-0, 1:2:4 by using 12.5 mm graded mechanically crushed stone aggregate as in sunken portion or similar items as in filling in and including demolition of lime concrete/lean concrete/brick bats from sunken portion exc. 15cm thickness (above ground level) in and including removing of debris away from site to a designated point fixed by local administration out side of MOD land , complete all as specified and directed by the Engineer in Charge .

Broken brick or boulders aggregate not exc 63mm deposited spread and levelled in layers not exc 15mm thick watered and rammed to a true surface in sunken portion or similar items as in filling in and including demolition of lime concrete/lean concrete/brick bats from sunken portion exc. 15cm thickness (above ground level) in and including removing of debris away from site to a designated point fixed by local administration out side of MOD land , complete all as specified and directed by the Engineer in Charge .

Steel water tubing, 50 mm bore medium grade ISI Marked , galvanized as in Spout for sunken floor, fixed as in wall with inside end fixed with wire netting and external end bevelled edge at 45 degree, complete all as specified and directed by Engineer-in-Charge.

Rendering 15 mm thick in cement mortar (1:4), as on fair faces of brick or concrete surfaces (sunken portion)finished the surfcae even and smooth without using extra cement mixed with liquid water proofing compound as per manufacturer’s instructions, complete all as specified and directed by Engineer-in-Charge. Note:- Quoted Rate of above item is inclusive the cost of WPC and nothing extra shall be admissible on this account.

Applying two coats of two component elastomeric acrylic polymer modified cementtitious waterproofing coat ng, smartcare Ultra block 2K or equivalent, having 215% elongation as per ASTMD-2370, resisting 5 bars hyrostatic pressure as per DIN 1048, Crack briding upto 3.50mm as per EN 1062-7 and sprinkling dry fine sand over wet second coating compelete, as per manufactures specifications ,complete all as specified and directed by Engineer-in- Charge. Note : Unless otherwise recommended by manufacturer, the mixing ratio of the components shall be 6 part of powder and 4 parts of liquid without any water addition in the mixing etc.

Wall mounted Kitchen Utensils dish rack stainless steel (31x10x30 inches) as approved by GE, complete all as specified and directed by Engineer-in-Charge.

Taking down carefully aluminium/ copper point wiring (light/ fan/ socket/ power) complete (fittings such as switches, sockets, ceiling roses pendants, regulators, sockets, light fitting etc. to be measured separately), removing materials to store for keeping in safe custody or for taking credit as per Schedule of credit including making good disturbed surfaces of walls, floors etc. , complete all as specified and directed by Engineer-in-Charge.

Point wiring for one light point/Fan point controlled by one switch one way in existing concealed conduit ,using FRLSH PVC unsheathed multistrand copper conductor cable of 1.5 sqmm single core and fixing on Modular Metal flush box alongwith Modular White cover plate with frame of suitable module for earth continuity insulated PVC unsheathed(green colour) 1.5 sqmm copper earth wire connected to common earth dolly ,complete all as specified and as directed by Engineer-in- Charge. Notes :(i) Wiring shall be done by using proper colour coding. (ii) Modular Metal flush box and Modular White cover plate with frame of shall be measured and paid seperately.

All as per srl item No. 107 here-in-before but for 05 Amp socket outlet on independent board, with cables 1.5 sqmm., complete all as specified and directed by Engineer-in-Charge. Notes :(i) Wiring shall be done by using proper colour coding. (ii) Modular Metal flush box and Modular White cover plate with frame of shall be measured and paid seperately.

All as per srl item No. 107 here-in-before but for One 3 pin socket outlet 5 amps on the same board with other switches, with cables 1.5 sqmm., complete all as specified and directed by Engineer-in-Charge. Notes :(i) Wiring shall be done by using proper colour coding. (ii) Modular Metal flush box and Modular White cover plate with frame of shall be measured and paid seperately.

Point wiring for one Bell point controlled by one switch one way drawn through in existing concealed conduit ,using FRLSH PVC unsheathed multistrand copper conductor cable of 1.5 sqmm single core and fixing on Modular Metal flush box alongwith Modular White cover plate with frame of suitable module for earth continuity insulated PVC unsheathed(green colour) 1.5 sqmm copper earth wire connected to common earth dolly ,complete all as specified and as directed by Engineer-in- Charge. Notes :(i) Wiring shall be done by using proper colour coding. (ii) Modular Metal flush box and Modular White cover plate with frame of shall be measured and paid seperately.

Point wiring for 15 Amps socket point controlled by one, one way switch using in existing concealed conduit ,using FRLSH PVC unsheathed multistrand copper conductor cable of 2.5 sqmm single core and fixing on Modular Metal flush box alongwith Modular White cover plate with frame of suitable module for earth continuity insulated PVC unsheathed(green colour) 2.5 sqmm copper earth wire connected to common earth dolly ,complete all as specified and as directed by Engineer-in- Charge. Notes :(i) Wiring shall be done by using proper colour coding. (ii) Modular Metal flush box and Modular White cover plate with frame of shall be measured and paid seperately.

Point wiring for one light point controlled by two switchs two way drawn through and including non metalic rigid PVC conduit medium duty of 20 mm dia or higher concealed type with all strandard fittings such as Tee junction, bends etc ,using FRLSH PVC unsheathed multistrand copper conductor cable of 1.5 sqmm single core and fixing on Modular Metal flush box alongwith Modular White cover plate with frame of suitable module for earth continuity insulated PVC unsheathed(green colour) 1.5 sqmm copper earth wire connected to common earth dolly ,complete all as specified and as directed by Engineer-in- Charge. Notes :(i) Wiring shall be done by using proper colour coding. (ii) Modular Metal flush box and Modular White cover plate with frame of shall be measured and paid seperately.

Point wiring for 15 Amps socket point controlled by one, one way switch using drawn through and including non metalic rigid PVC conduit medium duty of of 20 mm dia or higher with all strandard fittings such as Tee junction, bends etc ,using FRLSH PVC unsheathed multistrand copper conductor cable of 2.5 sqmm single core and fixing on Modular Metal flush box alongwith Modular White cover plate with frame of suitable module for earth continuity insulated PVC unsheathed(green colour) 2.5 sqmm copper earth wire connected to common earth dolly ,complete all as specified and as directed by Engineer-in- Charge. Notes :(i) Wiring shall be done by using proper colour coding. (ii) Modular Metal flush box and Modular White cover plate with frame of shall be measured and paid seperately.

Modular switch 1 way 6 A, 1 module ,complete all as specified and as directed by Engineer-in- Charge.

Modular socket outlet, 2/ 3 pins combined, 6 Amps, 2 module, 230 volts ,complete all as specified and as directed by Engineer-in- Charge.

Modular switch 1 way 16 A, 1 module ,complete all as specified and as directed by Engineer-in- Charge.

Modular socket outlet, 6/ 16 Amps, 2/3 pin combined, 230 volts, 2 module ,complete all as specified and as directed by Engineer-in- Charge.

Modular switch 2 way 6 A, 1 module ,complete all as specified and as directed by Engineer-in- Charge.

Modular Bell push 6 A, 1 module ,complete all as specified and as directed by Engineer-in- Charge.

Ceiling Rose, surface bakalite,65x50 mm two to three terminala , complete all as specified and directed by Engineer-in-Charge.

Ceiling fan regulator step type Modular of 120 watt ,2 module for 1200/1400 mm sweep ceiling fan and connecting up fixed as in replacment ,complete all as specified and directed by Engineer-in- Charge.

Lamp holder insulated body with back plate suitable for batten fittings with LED bulb 08 watt ,complete all as specified and directed by Engineer-in- Charge.

Buzzer, Ding Dong AC. 230 volts,single pole ,complete all as specified and directed by Engineer-in- Charge.

MCB SP, 6 to 32 Amps, ,240 Volts ,10 KA 'B' curve type to be housed in DBs of Proper and suitable size cable lugs to be fixed with MCBs fixed as in replacment ,complete all as specified and directed by Engineer-in- Charge.

MCB SPN, 40 to 63 Amps, ,240 Volts ,10 KA 'C' curve type to be housed in DBs of Proper and suitable size cable lugs to be fixed with MCBs fixed as in replacment ,complete all as specified and directed by Engineer-in- Charge.

Distribution box Double door type , SPN 12 way,with 200 amps rated bus bar, 240 Volts 50 HZ for MCBs, grouted flush to walls complete with IP 65 and metal double door ,epoxy powder coated fixed as in replacment ,complete all as specified and directed by Engineer-in- Charge.

LED Lights fittings 1x18watt 220 V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed by Engineer-in-Charge.

LED light fitting 1x9W/1x10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed by Engineer-in-Charge.

LED light fitting mirror type with high out put diffuser 2ft, 10watt 220v AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed by Engineer-in-Charge.

Wall mounted fittings with ABS housing and clear polycarbonate cover including retrofit LED bulb 7/9 watt and connecting up with three core flexible copper conductor cable of 0.5 sqmm size from ceiling rose, complete all as specified and directed by Engineer-in-Charge.

Modular Metal flush box 3 module ,complete all as specified and directed by Engineer-in- Charge.

Modular Metal flush box 4 module ,complete all as specified and directed by Engineer-in- Charge.

Modular Metal flush box 8 module ,complete all as specified and directed by Engineer-in- Charge.

Modular White cover plate with frame,3 module ,complete all as specified and directed by Engineer-in- Charge.

Modular White cover plate with frame,4 module ,complete all as specified and directed by Engineer-in- Charge.

Modular White cover plate with frame,8 module ,complete all as specified and directed by Engineer-in- Charge.

Modular White Blanking Plate , 1 module ,complete all as specified and directed by Engineer-in- Charge.

Sub main wiring with two single core 6.0 Sqmm FRLS PVC insulated and unsheathed 1100 volts grade cables with stranded copper conductor cable drawn through in and including 25 mm dia rigid non metallic PVC conduit and conduit accessories including one single core 6.0 Sqmm FRLS PVC insulated unsheathed stranded copper earth cable connected to common earth dully wiring for security light connection from junction box to security light in and including taking down carefully copper/Aluminium submain wiring of any size/core/type complete including conduits/casing caping etc, removing the materials/debris and making good the disturbed surfaces of wall, floors and ceiling etc. to match with the original existing finish complete all as specified and directed by Engineer-in-Charge. Note : (i) 2 run of 6.0 Sqmm ,1 run of PVC conduit & 1 run of 6.0 Sqmm cable will be measured as single run. (ii) Extra length of cables/wire required for connection to MCBs shall not be measured and paid separetly the rate quoted by contractor per unit shall be deemed to be included in the quoted rate of this item.

Note :Schedule of credit to be deducted on acceptances of bid.Details of Schedule of credit is given in tender documentse.

MOHAMMAD RASHID (BID ID -3442502)

M/S MANI GARG CONTRACTOR (BID ID -3448987)

M/S MATLOOB AHMED (BID ID -3443459)

Baba Engineers and Contractors (BID ID -3441904)

KUMAR AND COMPANY (BID ID -3449887)

jmv engineers (BID ID -3444299)