Providing street light on new bye pass (Road ID 6821) road length 2.07 KM in MC Uchana Limit at Uchana in Jind Distt.

Amount

Moulded case Circuit breakers

31.12 © Supply and erection of moulded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections

31.12 c (i) 15 amp.to 60 amp. 415 V ,10 KA 3-phase

Miniature Circuit Breaker and Isolator

31.17 Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections

(a) Miniature circuit breakers of 9 KA breaking capacity.

31.17a) (ii) SP MCB 6 amp. to 32 amp

31.22 Earthing

31.22(i) Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required

31.22(ii) Extra for using salt and charcoal / coke for pipe earth electrode as required

31.22(xix) Supply and erection of 20 mm x 3 mm thick G.I. tape fixed with suitable G.I. stapples of same size

31.26 Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections

31.26 (xI) Ard 16 Sq. mm 4 Core Cable

31.40 Supply and erection of PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe

31.40 (i) Size 1.5 sqmm ( 3/0.81 )

31.67 Supply and erection of mark double walled corrugated (DWC) HDPE pipe laid 1Mtr. Below ground level including diging and refilling of earth including cost of sutiable size socket/cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work

(i) HDPE pipe 63/50 mm outer dia/inner dia

31.68 Supply and Erection of Hot Dip Galvanized octagonal pole of 3mm thickness with base plate including cost of nut and bolts and all accessories as supplied by the manufacture including cost of foundation accessories etc. The foundation bolts as per manufacturer design should be hot dipped galvanized pole complete with door locking arrangement. Terminal plate consisting of 2 Nos. 100 A, 4 pole natural links including connectin etc. with suitable connecting arrangement for 2 No. MCBs/ Kit Kat including cost of R.C.C 1:1 5:3 for foundation of size 0.7M x 0.7 M x 1.8 M with minimum 8 Nos. 12 mm dia longitudinal MS reinforcement rods with rings of 8mm dia not more than 200mm C.C for fixing the pole with all labour & material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work. (Make: VIPIN ST/ PHILLIPS/ GE)

(i) 7 Mtr. Long pole with top dia 70mm and bottom dia 130 mm with base plate of size 220x220x12mm

N.S - 1 M.R.Items Supply and Erection of LED flood light fitting Havells Make JETA-AIRISFLS150W or its equivalent model and specifications of Wipro/Phillips/SURYA make with pressure die cast alluminium housing, IP-66 reflector and enclosed with toughened glass with all accessories as supplied by the manufacturer including cost of all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work

N.S - 2 Supply and Erection of LED street light lumanaries of Havells make Endura PLEARL NEOSL 60W LED or its equivalent make of Wipro make LR02-671-xxx-57-xx / Philips make BRP409LED 060CW HE NR PC SI PSU GR / HPL make HPLEDSL 6060S with die cast housing, toughened glass IP66 with all acessories as supplied by the manufacturer with all labour and material required to complete the job in all respect upto the Entire Satisfaction of the Engineer-in-Charge of the work

N.S - 3 Supply & Erection of 65 Amp. 3 Phase automatic / digital time switch of Indo Asian make HSN code 8537 along with contactor of required capacity of Indo Asian make movement controlled by precisaty quartz osciliation operation on main supply of continue to run on built in rechargeable nickle cadium call for 150 hours in the event of power failure including cost of all petty items complete in all repsect upt the entire satisfaction of Engineer-in-Charge of the work.

N.S - 4 Supply & Erection of Single arm bracket made of 40mm dia G l pipe B class lSl 1.25mtr. Long with coller pipe (Gl) 75mm dia 60 cm Long top covered with ornamental cap duly welded painted 2 coats of aluminum paints on bracket and golden paint of ornamental cap including the cost of labour and petty material etc. complete in all respect up to the entire satisfaction of Engineer-in charge of the work

NS-5 Supply & erection of outdoor duly factory manufactured feeder panel to operate S/L system made out of C.R.C.A. sheet 2 mm thick of App. Size ( 1100 L x 1400 H x 300 D ) mm with hot type canopy ventilation slots ( box type ) angle iron / channel iron frame of 40 mm x 40 mm x 6 mm on both sides. The panel should have double door godrej Almirah type weather proof with locking arrangement. The panel as such be made in two compartments one for space of energy meter with glass & solid wire mesh and sealing arrangements. The second compartment to accommodate the complete control system. Both the compartment is to accommodate system of set of timer, Copper Bus bar of size 400 mm x 20 mm x 3 mm duly tinned & insulated. The panel duly painted in powder coated gray shade. The main pannel door fixed with rubber gasket of superior quality to make it water proof. The panel should be fixed on 1:2:4 C.C. Block size 1300 mm x 500 mm x 250 mm above ground level duly plastered with 12 mm thick 1:4 cement plaster having a C.C. base of size 1500 mm x 750 mm x 250 mm below ground level.

NS-6 Supply and erection of 40 Amp. 3 Phase AC Energy Meter in built C. T. 40/5 ( Approved by H.V.P.N on existing pole with clamps of required size including making necessary connections with petty material required to Complete the Job in all respect upto entire satisfaction of Engineer -in-Charge of the work

J.B.S.Electrical Co.

KKM Engineering Solutions Pvt. Ltd.