SITC OF ELECTRICAL WIRING WORKS AND LED FITTINGS FOR ACADEMIC CLASSROOM EXHIBITION HALL and LABORATORIES

Amount

Supply, drawing, termination and testing of following sizes of FRLS or FRLSH, PVC insulted multistranded copper conductor wire should be inline with the incoming phase colour, 1.1KV grade in existing surface / recess / PVC conduits, including floor cutting & finishing by placing of all the accessories & lugs as per the requirement complete etc., Make: Finolex/ Polycab/ RR kabel/ Havells

1C x 2.5 Sq.mm for UPS Power (1-ph)

Red/Yellow/Blue

Black

Green

1C x 4 Sq.mm for UPS Power (1-ph)

Red/Yellow/Blue

Black

Green

1C x 4 Sq.mm for Raw Power (1-ph)

Red/Yellow/Blue

Black

Green

1C x 4 Sq. mm for Raw Power (3-Ph)

Yellow

Black

Green

Supply & drawing of 1" size PVC cum metalic flexible hose (Heavy duty) for wires with required all accessories etc., ISI marked

Supply & drawing of 1" size PVC ordinary hose for wires with required all accessories etc., ISI marked

Supplying, fixing, testing and commissioning of the following suitable size modular type PVC box, plate, cover, switch, socket and connections etc.in the wall/surface/recess with wooden planks, including wood / table cutting and making good etc., as required. Make: Legrand-Myrius/ Crabtree-Thames

3 module PVC box with modular plate, cover and box in front on surface or in recess or in wooden/metal table, including providing and fixing etc.,

6 module PVC box with modular plate, cover and box in front on surface or in recess or in wooden/metal table, including providing and fixing etc.,

8 module PVC box with modular plate, cover and box in front on surface or in recess or in wooden/metal table, including providing and fixing etc.,

1 No. of 5/6A rating modular switch including connections etc., as required.

1 No. of 3 pin, 5/6A rating modular socket outlet including connections etc., as required.

1 No. of 15/16A rating modular switch including connections etc., as required.

1 No. of 6 pin, 15/16A rating modular socket outlet including connections etc., as required.

Supply and drawing following UTP 4 pair twisted CAT - 6 lan cable in existing surface/recess/PVC conduits and including criming, termination, Numbering at both end as required. Make: Polycab/ Molex/ Finolex

Supply and fixing of 32 mm x 20 mm size PVC cable management with required necessary fixing requirements. Make: Legrand/ MK

Supply and fixing of 50 mm x 50 mm size PVC cable management with required necessary fixing requirements. Make: Legrand/ MK

Supply and fixing of 100 mm x 50 mm size PVC cable management with required necessary fixing requirements. Make: Legrand/ MK

Supplying, cutting, fixing and installation of 12 mm thick ply food whereever required for installation of electrical boxes etc., ISI Marked

Supplying, fixing & termination of suitable size 1 module PVC box with Suitable for RJ45 LAN modular plate and cover in front on surface or in recess or in wooden table, including providing and fixing of 1 no. of RJ 45 LAN socket, connections etc., as required. Make: Legrand-Myrius/ Crabtree-Thames

Supplying, fixing & termination of suitable size 2 module PVC box with Suitable for RJ45 LAN modular plate and cover in front on surface or in recess or in wooden table, including providing and fixing of 2 no. of RJ 45 LAN socket, connections etc., as required. Make: Legrand-Myrius/ Crabtree-Thames

SITC of 30 Amps, 415 Volts, TPN industrial type socket outlet, with four pole and earth, metal enclosed plug top along with 30 Amps "C" curve, TP MCB, in sheet steel enclosure, on surface or in recess with chained metal cover for the socket outlet, gland and connections, testing and commissioning etc., as required. Make: Legrand/ Siemens/ Schneider

SITC of following sizes of Medium class PVC conduit along with accessories like couplers, bends, staples, saddles, screws, fastners, cement, concrete, sand etc., as required in surface/recess including cutting the wall and making good the same with cement, paint and sand in case of recessed conduit as required. Make: Precision/ Avonplast/ Modi

40 mm (11/2" PVC pipe)

SITC of 6-way (8+18) surface/ recess mounting, vertical type, double door, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. Make: Legrand/ Siemens/ Schneider

SITC of the following rating, 415/230 Volts, 'C' Curve, MCB (Miniture Circuit Breakers) & RCCB (Residual current circuit breakers) suitable for inductive load of the following poles in the above mentioned vertical TPN MCB DB complete with connections & dummies etc., as required. Make: Legrand/ Siemens/ Schneider

4 Pole, TPN, 63A, 'C' Curve, 10 kA breaking capacity, MCB

4 Pole, TPN, 63A, 100 mA, 'C' Curve, RCCB

3 Pole, TP, 32A, 'C' Curve, 10 kA breaking capacity, MCB

Single pole blanking plate

SITC of following way, single pole and neutral, sheet steel, MCB distribution board, 240Volts, surface/recess, complete with tinned copper busbar, neutral busbar, earth bar, din bar, interconnections, powder painted including earthing etc., as required (But without MCB/RCCB/Isolator). Make: Legrand/ Siemens/ Schneider

SITC of the following rating, 230 Volts, 'C' Curve, MCB (Miniture Circuit Breakers) & RCCB (Residual current circuit breakers) suitable for inductive load of the following poles in the above mentioned Horizontal DB complete with connections & dummies etc., as required. Make: Legrand/ Siemens/ Schneider

2 Pole, SPN, 240V, 32A, 'C' Curve, 10 kA breaking capacity, MCB

2 Pole, SPN, 240V, 40A, 30 mA, 'C' Curve, RCCB

1 Pole, SP, 10A, 'C' Curve, 10 kA breaking capacity, MCB

SITC of 3 Pole, TP, 32A, 'C' Curve, 10 kA breaking capacity, MCB suitable for inductive load, complete with connections etc., in the existing main incomer DB etc., as required. Make: Legrand/ Siemens/ Schneider

SITC of single Pole, SP, 25A, 'C' Curve, 10 kA breaking capacity, MCB suitable for inductive load, complete with connections etc., in the existing main incomer DB etc., as required. Make: Legrand/ Siemens/ Schneider

SITC of 2 Pole, SPN, 16A, 'C' Curve, 10 kA breaking capacity, MCB suitable for inductive load along with 20 A SPN type Industrial metal clad box including plug, socket complete with connections etc., in the wall/surface as required. Make: Legrand/ Siemens/ Schneider

SITC of 2 Pole, SPN, 25A, 'C' Curve, 10 kA breaking capacity, MCB suitable for inductive load along with 25A SPN type Industrial metal clad box including plug, socket complete with connections etc., in the wall/surface as required. Make: Legrand/ Siemens/ Schneider

Supplying, fixing, testing & commissioning of 600 * 600 mm size, LED, 42 watt, >110 lm/watt, high efficient, recess mount square fitting with necessary hooks, suitable chain supports, connections etc., to mount the existing false ceiling as per the directions of the Engineer-In-Charge. Make: Philips/ Crompton/ Havells/ Bajaj

Removing, relocationg, testing & commissioning of existing LED 36 watt, 600 mm * 600 mm size square fitting with necessary hooks, chain supports, wiring and connections etc., as per the directions of Engineer-In-charge.

SITC of 400 mm sweep, low noise, wall mounted fans preferably white (shall match the existing fan colour). Make: Havells/ Crompton/ Orient/ Almonard/ Bajaj

Fabrication, supply & fixing of triangular shape (250 * 250 * 250 mm), 2 mm thick MS powder coated fan mounting brackets along with suitable fastners etc., as required to complete the job as per the directions of Engineer-In-Charge.

MAHESH KUMAR GULATI

KAVERI ELECTRICALS

POWERTECH ENTERPRISES

YOUNG ENGINEERS ELECTRICAL SOLUTTIONS