Loading
Loading…
Loading…
Tender Value
₹26.0 L
EMD Value
₹52,092
Closing Date
29 Jul 2026, 4:00 pm3d left
EE(BM-PK)
Room no-1615 16th floor Palika Kendra New Delhi
A/R and M/O building in BM-PK Division during 2026-27 SH Misc repair and maintenance work in Allopathic Dispensary Lodhi colony under Aliganj Service center
2026_NDMC_295646_1
NITNO.10/EE(BM-PK)/2026-27
Open Tender
Civil Works - Buildings
Works
75 days
NDMC area
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹52,092
21 Jul 2026
21 Jul 2026
29 Jul 2026
21 Jul 2026
29 Jul 2026
21 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer, of required shade and colour all complete : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre | 20 | Square Metre | 186.06 | ₹3,721.2 |
| 2 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | 20 | Square Metre | 156.4 | ₹3,128 |
| 3 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) | 10 | Square Metre | 347.81 | ₹3,478.1 |
| 4 | 15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand) | 10 | Square Metre | 412.65 | ₹4,126.5 |
| 5 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10Kilogram/Square Metre) | 8 | Square Metre | 1,093.04 | ₹8,744.32 |
| 6 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :Of area 3 sq. metres and below | 6 | each | 143.82 | ₹862.92 |
| 7 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick excluding ISI marked Stainless Steel butt hinges with necessary screws | 14 | Square Metre | 2,169.03 | ₹30,366.42 |
| 8 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick | 24 | Square Metre | 899.26 | ₹21,582.24 |
| 9 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868),transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm | 6 | each | 303.91 | ₹1,823.46 |
| 10 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 300x10 mm | 6 | each | 130.39 | ₹782.34 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.96 MB
BOQ_393375.xls
BOQ • 0.38 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].