Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹49.5 L
EMD Value
₹99,000
Closing Date
19 Dec 2025, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
P.WAY
30 conditions · 2 needing a document upload
Whether History sheet of tenderers (Annexure-2 of Part-II of Tender documents) uploaded duly filled in with supportive documents.
Whether the details of facilities available vis-a-vis the requirements mentioned in STR in a tabular/narrative form if you are not on the approved list of RDSO, if required in the Annexed Document, is submitted.
Whether, EACH PAGE of the copy of documents/certificates in support of credential is self attested/digitally signed by tenderer/authorised representative with signature, stamp & date.
Whether all the documents related "Mandatory Requirement", as applicable and mentioned in the bid documents are enclosed with the tender.
Please submit bank details as per enclosed Annexure-12 of Part - II of Tender Documents or photo copy of a "Cancelled Cheque". (For details refer tender documents)
Please submit Certificate of Familiarisation as per Annexure-1 of Part-II of Tender Documents. (For details refer tender documents)
Please submit required details as required from Annexure 2 to 11 of Part-II of Tender documents duly filled in and signed. Supportive documents/separate sheet are to be submitted, if required. Annex-2: HISTORY SHEET OF THE TENDERER, Annex-3: TECHNICAL EIGIBILITY CRITERIA, Annex-4: DETAILS OF CONSTRUCTIONS MACHINERIES, TOOLS & PLANTS, VEHICLES ETC. AVAILABLE (ON HAND AND PROPOSED TO BE UTILISED, Annex-5: DETAILS OF TECHNICAL AND OTHER PERSONNELS AVAILABLE ON HAND & PROPOSED TO BE ENGAGED. Annex- 6: DETAILS OF WORKS COMPLETED DURING PREVIOUS THREE FINANCAIL YEARS & CURRENT YEAR, Annex-7: DETAILS OF WORKS ON HAND, Annex- 8: DECLARATION REGARDING ASSOCIATION OF RAILWAY OFFICER (S) WITH TENDERER(S), A n n e x - 9 : LIST OF COURT CASES, Annex-10: LIST OF ARBITRATION CASES. Annex- 11: BROAD PLAN FOR EXECUTION OF THIS WORK. (For details refer tender documents)
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF)/ Limited Liability Partnership (LLP) etc. If it is NOT mentioned in the submitted tender that tender is being submitted on behalf of a Sole Proprietorship firm/Partnership firm/Joint Venture/Registered Company etc., then the tender shall be treated as having been submitted by the individual who has signed the tender . The tenderer(s) shall enclose the attested copies of the constitution of their concern and copy of PAN card along with the tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be. (for details refer tender documents) NOTE: Any document containing PAN number of the tenderer(s) shall also be considered in lieu of PAN card. However, if no document having mention of PAN number is uploaded, offer will be summarily rejected. (For details refer Tender documents)
For all tenders having advertised cost of Rs.10 lakh or above, the contractor shall have to submit the option to take payment from Railways through a letter of credit (LC) arrangement. The tenderer shall affirm having read over and agreed to the terms and conditions of the LC option. The option of taking payment through LC arrangement, once exercised by tenderer at the time of bidding, shall be final and no change shall be permitted, thereafter, during execution of contract. (The tenderer have to submit the option to take payment from Railway through a Letter of Credit arrangement) (For details refer Tender documents)
The list of personnel / organization on hand and proposed to be engaged for the tendered work. Similarly, list of Plant & Machinery available on hand and proposed to be inducted and hired for the tendered work. (For details refer tender documents)
Documents to be submitted as per Clause 14 of GCC-April 2022 in support of (a)Sole Proprietorship firm (b) HUF (c) Partnership Firm (d) Joint Venture (JV) (e) Company registered under Companies Act 2013 (f) LLP (Limited Liability Partnership) (g) Registered Society & Registered Trust. (for details refer tender documents) NOTE: Non submission of above documents will lead to summarily rejection of the offer.
All repairs & maintenance of P.way Zonal works for a period upto 30.09.2026 from Km 55.00 to Km 107.00 between Manikagoda - Daspalla Section under jurisdiction of SSE(P.Way)/Nayagarh Town.
eTender-hq-kur-309-2025~ECOR
eTender-hq-kur-309-2025
Open
Works - General
12 Months
Khordha, Odisha
₹0
₹99,000
19 Dec 2025
28 Nov 2025
5 Dec 2025
36 items across 3 schedules · ₹42,02,513.34 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | For Casual/Scattered Rail Renewal work | RM | 30.00 | 33.06 | 991.8 |
| 2 | Lubrication of ERCs and its liner contact area by removal of ERCs and Metal / GFN liners rail panel, cleaning of rust / scale of ERC, Metal / GFN liners & SGCI insert by using wire brush, scrapper / sand emery paper etc supply application of graphite grease, as prescribed by Railway for under side of liners corresponding area of rail foot & SGCI insert with ERCs and re-fixing the same as procedure prescribed in latest edition IRPWM with contractors grease and all other tools & plants complete and as directed. Note: Each ERC in this item shall constitute 1 ERC and its Liner Contact area. | ERC in and & per of | 35000.00 | 4.08 | 1,42,800 |
| 3 | Depth of 300 mm below bottom of sleeper Turnouts | for TRM | 150.00 | 862.66 | 1,29,399 |
| 4 | Lifting and packing for regrading the existing PSC sleeper track to required height / level stages not exceeding 75mm or part thereof a time, providing permissible ramp for track, insertion of moorum / sand / stone ballast uniformly under the existing track placing the same to safe approved gradient, gauge, cushion including levelling and round of through packing to allow train movement at restricted speed of 30 kmph a specified length with all leads & lifts fixing, marking, painting rail level pegs every 30m interval. Note: Lifting of track shall be done in stages as per procedure prescribed in latest edition of IRPWM to get the proposed final level as per approved working profile, directed by Engineer in-charge. | TRM in at the and one for and at as | 1500.00 | 165.82 | 2,48,730 |
| 5 | For 60 Kg Rail, Single shot crucible fitted with Automatic Tapping Thimble , 3 pieces Mould (Zircon washed) and Compressed Petrol/LPG pre heating technique | Each Air | 70.00 | 1,882.35 | 1,31,764.5 |
| 6 | For PSC sleeper Track with Sleeper Density 1540 Sleepers/Km or more | of TRM | 15000.00 | 96.79 | 14,51,850 |
| 7 | For PSC Sleeper Track with Sleeper Density 1660 | of TRM | 1500.00 | 127.76 | 1,91,640 |
| 8 | 1 in 12 PSC layout | Set | 5.00 | 13,828.92 | 69,144.6 |
| 9 | Packing of isolated loose PSC sleepers on plain track below the bottom of t h e sleepers and surrounding through out its length duly opening two galas on either side of renewed sleepers and packing the sleeper bring the track to normal speed including gauging, aligning, squaring of sleepers sectioning of ballast to the required profile with all contractor's labour, tools and plant including all lead and lift and crossing of tracks where ever necessary complete and directed by the Engineer-in-charge. | Sleeper the to and etc. as | 1100.00 | 75.21 | 82,731 |
| 10 | Slack picking of joint sleepers and 3 approach sleepers on either sides giving required lift make up general track level, packing profiling as directed. | Each to and | 350.00 | 524.56 | 1,83,596 |
| 11 | Without Rail tensor | TRM | 3500.00 | 33.95 | 1,18,825 |
| 12 | With 2 bolts | Set | 30.00 | 102.55 | 3,076.5 |
| 13 | Trimming of tree branches coming within 6m of centre line of track & those obstructing views of Curves/LCs / Signal / Indicator locations in section & station yard, as specified by Engineer in-charge including disposal branches, bushes outside cess/yard. Note: Girth of more than 20 cm will only considered as tree branch. | Each at of be | 15.00 | 158.89 | 2,383.35 |
| 14 | For duration of 8 hrs. | Each | 400.00 | 792.06 | 3,16,824 |
| 15 | For Night shift | Each | 370.00 | 985.06 | 3,64,472.2 |
| 16 | For day time block working | TRM | 7000.00 | 17.66 | 1,23,620 |
| 17 | For night time block working | TRM | 3500.00 | 19.79 | 69,265 |
| 18 | BCM/FRM/UNIMAT (7.5 KVA generator and 12x500 W) | Night | 2.00 | 5,063.65 | 10,127.3 |
| 19 | CSM / DUO / 3X with or without DGS (7.5 KVA generator and 8x500 W) | Night | 2.00 | 4,822.82 | 9,645.64 |
| 20 | 52 Kg - 90 UTS - Outside Track | Each | 10.00 | 277.35 | 2,773.5 |
| 21 | 60 Kg - 110/90 UTS - On Running Line | Each | 15.00 | 384.24 | 5,763.6 |
| 22 | On Running Line | Each | 200.00 | 68.3 | 13,660 |
| 23 | Providing and fixing of flared portion of guard rails of any rail section over PSC sleepers including fixing of with all fittings, including leading of rails and fittings, squaring and adjusting spacing of sleepers as required, providing nose blocks duly cutting wooden blocks supplied by railways and fixing it with bolts of 16mm dia as directed complete finished as per RDSO's approved drawing. Note: 1.One set consists of LH & RH side rails of one end. 2.Required P.Way fittings will supplied at SSE stores depot. | Set and be | 2.00 | 3,427.8 | 6,855.6 |
| 24 | Drilling holes 25mm to 40mm dia. with twist in the foot of guard rails for fixing guard rails on bridge as directed. | drill Each | 300.00 | 65.62 | 19,686 |
| 25 | Drilling of 25mm to 40mm dia. holes in PSC sleepers with suitable rotary hammer / drilling machine at indicated location for fixing guard rails on bridges & its approaches as approved drawing and fixing of contractor's HDPE dowels and adhesive of approved quality to Drawing no. RDSO/T-3002, procured from RDSO's approved sources with contractor's materials and consumable. | Each of per | 300.00 | 288.67 | 86,601 |
| 26 | 7.2 mm dia. | Each | 30.00 | 464.74 | 13,942.2 |
| 27 | JCB Backhoe Loaders 3DX Plus or similar with minimum 1.10 cum bucket capacity | Hour | 15.00 | 802.46 | 12,036.9 |
| Schedule total | ₹38,12,204.69 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .