Loading
Loading…
Loading…
| # | Company | Amount |
|---|---|---|
| 1 | ₹6.4 L Per unit ₹7,009.20–₹69,525.60 JYOTI COMMERCIAL CORPORATION LALBAZAR MORE BESIDE HINDU HIGH SCHOOL BANKURA BANKURA WEST BENGAL 722101 | BANKURA | WEST BENGAL | 722101 |
Tender Value
Refer Docs
Closing Date
25 Sept 2026, 2:00 pmClosed
Single Packet
Normal Tender
No
Not Applicable
Itemwise/Consigneewise
Lowest to Highest
CONSIGNEE
Not Applicable
90 days
Expenditure
General
IE
3 conditions · 3 needing a document upload
Bulk order will be placed on the manufacturer or its authorized agent having proven performance for Same or similar item. Para No. 2.6 of GCC attached may be referred to, for full details. Bidders are advised to read it carefully before bidding.
Tenderer other than manufacturer must attach/upload tender specific authorization certificate issued by original manufacturer along with their offer failing of which offer of the firm will not be considered as a valid offer and such offer will be summarily rejected without any back reference.
Bidder must provide Escalation Matrix of Telephone Numbers for Service Support. The Bidder/OEM must have Dedicated/toll Free Telephone No. for Service Support. The bidder should not be blacklisted from any Govt. establishment in last 15 years, non-blacklisted certificate to be uploaded. The furniture manufacturer (OEM/Bidder) having the factory act license and ESIC/ EPF registration. Scanned copies to be uploaded. The manufacturer (OEM/Bidder) should have: ISO 9001:2015, ISO 45001:2018, ISO 14001:2015, ISO 50001:2018, ISO 13485:2016 for Design, Manufacturing, Sales and service (All ISO certificates must be from NABCB recognized accreditation body) certified. Manufacturer (OEM/Bidder) should have BIFMA (Membership), AIOTA, Indian Design Mark certification, Green Guard Gold Certification, BIFMA Level 2 conforms to the ANSI/BIFMA e3-2019 Furniture Sustainability Standard (attach screen from www.bifma.org website), IAQ conforming to indoor advantage gold, Green Pro, IGBC Platinum certificate, GRIHA V 2019 certificates and whose Factory of manufacturing is certified with Certificate of Zero waste to landfill by Green co & approved by CII.
30 conditions
[i] Have you attached the past performance credentials with your offer? [ii] Have you mentioned the complete address of the work premises of the OEM where Third Party Inspection (TPI) inspection will be carried out before dispatch of the material?
Public procurement (Preference to Make in India) is applicable as per para 29.0 of GCC attached.
Bidders should confirm following certificate for Compliance (a) I have read the clause Sr. No. 32 of Instructions to tenderers and general conditions of tenders for supply contract attached with the tender regarding restrictions on procurement from a bidder of a country which shares a land border with India and on sub-contracting to contractors from such countries. (b) I certify that this bidder is not from such a country and will not subcontract any work to a contractor from such countries unless such contractor is registered with the Competent Authority. I also certify that this bidder will not offer any products/services of entity from such countries unless such entity is registered with the Competent Authority. (c) I hereby certify that this bidder fulfills all requirements in this regard and is eligible to be considered. (d) I hereby acknowledge that in the event of acceptance of my bid on above certificate and if the certificate is found to be false at any stage, the false certificate would be a ground for immediate termination of contract and further legal action in accordance with the Law. (Bidders confirming this certificate for Compliance shall select Yes in the Complied column. However, in case you don t confirm above certificate for Compliance, select NO in the complied column. In such cases you are required to submit the certificate for Compliance as per Part B of Annexure8 Instructions to tenderers and general conditions of tenders for supply contract along-with their Bid/Offer.
FOR: Destination.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
1 location across West Bengal · 40 Numbers total
Furniture
IE265728~SER
IE265728
Open - Indigenous
Goods
West Bengal
₹0
Exempted
14 Oct 2026
18 Sept 2026
7 items · 40 Numbers total
Computer table - Overall Size 500 mm D X 900 mm W X 750 H. Raw Material (specs of lamin ations & thickness): MDF, PB 15mm MDF for table top, 15mm PB for other panels. 0.18mm pvc was vacuum laminating for surface of table top, 0.4 mm lipping for other panels. Make Godrej or Similar. [ Warranty Pe riod: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| DAO-ADA, SER | West Bengal | 4.00 Numbers |
| Total | 4 Numbers | |
Mid Back Chair : 1) Seat Assembly : The seat assembly is made up of 1.2 (+/-) 0.1cm. thick h ot-pressed plywood measured as per QA method described in OCP-QLTA-P14-18, upholstered with fabric up holstery covers and moulded Polyurethane foam. *Seat Size : 47.0 cm. (W) x 48.0 cm. (D). *Mid Back Size : 46.5 cm. (W) x 60.5cm. (H). 2) Back Assembly : The back asembly is made of powder coated (DFT 40 - 60 microns) tubular frame of 2.54 (+/-) 0.03 cm. x 0.2 (+/-) 0.016cm.thk. MS ERW tube designed with contour ed lumbar support for extra comfort. The back is upholstered using Net fabric with high tenacity yarn. 3) Hi gh Resilience (HR) Polyurethane Foam : The HR polyurethane foam is moulded with density = 45 (+/-) 2 kg/ meter cube and hardness load 16 (+/-) 2 kgf as per IS:7888 for 25 % compression. 4) Armrests : The one-pi ece armrests are injection moulded from black Co-polymer Polypropylene. 5) Center Tilt Synchro mechanis m : The mechanism is designed with the following features: 360 degree revolving type, 17 degree (+/-) 2 d egree maximum tilt on pivot at centre , Upright position locking. Tilt tension adjustment. 6) Penumatic Heig ht Adjustment : The pneumatic height adjustment has an adjustment stroke of 11.0 (+/-) 0.3cm. 7) Telesco pic Bellow Assembly : The bellow is 3 piece telescopic type and injection moulded in Black Polypropylene. 8 ) Pedestal Assembly : The pedestal is injection moulded in black 33% glass-filled Nylon 66 and fitted with 5 nos. twin wheel castors. The pedestal is 66.3 (+/-) 0.5cm. pitch-center dia. (76.3 (+/-) 1.0 cm with castors.) 9) Twin Wheel Castor : The twin wheel castors are injection moulded in Black Nylon. The Product should hav e Green Pro Certificate, BIFMA Level 2 Compliance, Indoor Air Quality Gold (IQA) Certificate, GRIHA Certifica te.The Product should have BIS Licence. Make Godrej or Similar. [ Warranty Period: 30 Months after the d ate of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| DAO-ADA, SER | West Bengal | 4.00 Numbers |
| Total | 4 Numbers | |
Full Back Revolving Chair with Headrest. 1) Seat Assembly : The seat is made up of 1.4 plus/ minus 0.1 cm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam. Full Back Size : 76.0 cm (W) x 76.0 cm. (D) 114.0 -123.5 cm (H)* Seat Size : 49.5cm (W)x 51.8cm(D). 2) Back Assem bly : The Back is injection moulded in Glass filled Polypropylene which is upholstered with Mesh fabric. The back consist of adjustable Lumbar support made of injection moulded Polypropylene having an adjustment of 5.0 plus/minus 0.1 cm. * Back Size : 44.5 cm(W) x 57.5 cm(H). 3) Polyurethane Foam : The polyurethane foam for seat is of density = 30 plus/minus 2kg/meter cube. 4) Armrests (Adjustable) : The height adjustabl e armrest is made of Polypropylene and can be adjusted to 6.0 plus or minus 0.1cm height. It also has swiv el and To and Fro adjustment with moulded PU armtop. 5) Mechanism :The mechanism is designed with the following features: 360 degree revolving type, Centre tilt syncro, 4 position (including upright lock) giving o ption of variable tilt angle to the chair. 6) Headrest : The Headrest is made up of injection moulded Polypro pylene which upholstered with foam and fabric. Its has an adjustment of 3.0 plus or minus 0.1cm & its asse mbled over Mid back chair. 7) Penumatic Height Adjustment : The pneumatic height adjustment is chrome plated with an adjustment stroke of 10.0 plus/minus 0.3cm. 8) Pedestal Assembly : The pedestal is injection moulded Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.0 plus or minus 0.5 cm P.C.D. 9 ) Twin Wheel Castor : The twin wheel castors are injection moulded in black Polypropylene having 5.0 plus or minus 0.1 cm wheel Diameter. The Product should have Indian Desigen Mark Certificate, Green Pro Certif icate, BIFMA Level 2 Compliance, Green Guard Gold Certificate (from - UL), Indoor Air Quality Level 2 (IQA) Certificate, The Product should have BIS Licence. Make Godrej or Similar. [ Warranty Period: 30 Months a fter the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| DAO-ADA, SER | West Bengal | 4.00 Numbers |
| Total | 4 Numbers | |
Almirah make of SPECIFICATION - Half Height Product Size: 900 mm (W) x 450mm (D) x 1167 .5mm (H) Construction & Material: Rigid Knock down construction Prime Quality CRCA Steel - Panels from 0. 6 mm thick & Front frame 0.8 mm thick. Configuration (Door) : Full height Steel Hinged Door Locking & han dle : Plastic Recessed Handle cum Cam Lock 3 way locking mechanism with shooting bolt arrangement. Sh elving : Height wise Adjustable Shelf Mounting Uniformly Distributed Load Capacity per each full shelf is 80 Kg maximum Minor : 2 Nos. of Adjustable Full Shelves. Top: Metal Top Finish: Epoxy Polyester Powder coate d to the thickness of 50 microns (+/-10). The Product should have Green Guard Gold Certificate (from - UL), The Product should have BIS Licence. Make - Godrej or Similar [ Warranty Period: 30 Months after the dat e of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| DAO-ADA, SER | West Bengal | 4.00 Numbers |
| Total | 4 Numbers | |
Open Bookcase / Display Rack Overall Height 54 inches Overall Width 36 inches Overall Dept h 18 inches Storage 3 Open Shelves Construction Strong and durable panel-based construction Side Panels Full-height side panels Top Design Rounded/curved front corners Shelf Design Fixed horizontal shelves for b ooks, files and display items Back Panel Open-back design, as shown Finish Premium wood-finish laminate Application Office, Library, Study Room, Reception, Home & Display Area Dimensions 54" H x 36" W x 18" D.Make Godrej or Similar. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| DAO-ADA, SER | West Bengal | 4.00 Numbers |
| Total | 4 Numbers | |
L Shape Executive Table Overall Size 1800 X 795 mm Main Top : Pericle - board ( Melamine F inish ) 25 mm Top + 15 mm Frame , 2mm Pvc Lipping on Top and 0.35mm Pvc Lipping on Frame. Modestry Panel : 1100 x 405 x 16mm THK Pericle Board ( Melamine Finish ) with 0.35 mm THK PVC Lipping . Drawer Point : 500 x 170 x 16 mm Particle Board ( Melamine Finish ) With 0.35 mm THK PVC Lipping. KBPT : 578 ( W) x 284 ( D) x 16 mm THK Particle Board ( Melamine Finish ) With 0.35 mm THK PVC Lipping. ERU : 1600 ( L) x 500 (W) x 650 (H) all Panels are 16mm THK Particle Board ( Melamine Finish ) With 0.35 mm THK PVC L ipping. Make Godrej or Similar. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| DAO-ADA, SER | West Bengal | 4.00 Numbers |
| Total | 4 Numbers | |
Sledge base with arm Chair : 1) Seat Assembly : The Seat is injection moulded in glass filled Polypropylene compound which is upholstered with fabric upholstery covers and moulded Polyurethane foa m. The Back is injection moulded in glass filled polypropylene compound which is upholstered with Mesh fa bric (Refer colour chart for seat & Back upholestry in product catalog). *Seat Size : 50.0 cm. (W) x 48.0 cm. (D) 53.0 cm. (W) x 39.0cm. (H) *Back Size : 2) High Resilience (HR) Polyurethane Foam : The HR polyuretha ne seat foam is moulded with density 45 (+/-) 2 kg/meter cube and hardness 16 (+/-) 2 kgf as per IS:7888 f or 25 % compression. 3) M.S Powder Coated Frames for Sled Base Chairs : The powder coated ( DFT 50 (+/- ) 10 microns) welded tubular main frame is made from 2.54 (+/-) 0.03 cm x 0.2 (+/-) 0.016 cm and 1.9 (+/- ) 0.3mm x 0.12 (+/-) 0.0096 cm M.S.E.R.W. tube. 4) Armrests : The Armrest are made of glass filled Polypro pylene compound and assembled over the tubular frame. The Product should have Green Guard Gold Certif icate (from - UL). The Product should have BIS Licence. Make Godrej or Similar. [ Warranty Period: 30 Mo nths after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| DAO-ADA, SER | West Bengal | 16.00 Numbers |
| Total | 16 Numbers | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
5797653.pdf
ATTACHMENT
5874001.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .