Glass Sliding Door-cum-Partition Work for the Experiential Lab, Academic Complex Building, COEP Tech, Pune

Providing and fixing gypsum board partition wall of required height, consisting of G.I. frame work made of special sections formed from galvanized steel sheet, comprising floor and ceiling channels and vertical studs of suitable size and thickness, fixed to floor, ceiling and adjoining walls with approved anchor fasteners at required spacing, including fixing of 12.5 mm thick tapered-edge gypsum plaster boards conforming to IS 2095 (Part-I) on both faces with self-drilling drywall screws, including jointing of board joints with jointing tape and approved jointing compound, filling of screw heads, sanding and finishing to a smooth and seamless surface, including necessary cutting, openings, corner beads, reinforcement around openings and all necessary accessories, complete as per manufacturer's specifications, approved drawings and directions of Engineer-in-Charge.

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.

Providing and fabricating structural steel work in rolled sections, fixed with connecting plates or angle cleats in main and cross beams, hip and jack rafters, purlins connecting to truss members and the like, as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/ bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.

Automatic Sliding door operator ES 250 PRO Easy 6150 mm with low-noise drive motor without gearbox, TÜV design tested for 1.5 million Cycle of operation in accordance with low voltage guidelines of IEC /EN 60335-2-103 and fulfils EN 16005 and DIN 18650-1 / DIN 18650-2 standards. With the clear passage width up to 3000 mm. The Profile Finish should be Silver Anodized E6/C0, with operator dimensions (H x D) : 100 x 180 mm. Drive with acoustically decoupled and exchangeable running rail and wear-resistant special surface. Rollers made of special plastic, Counter rollers as derailment protection.Mounting plate with prefabricated fixing holes and threaded holes. Microprocessor-controlled control unit, Self-learning, with adjustable parameters for opening and closing speed, hold-open time 0- 180 Sec, with smps, Class of protection IP 20.Program Switch with Knob, ES 250 PRO Easy, Maximum Panel Weight Carrying Capacity of 2X 125 Kgs & 1X 125 kgs each leaf. The Max. opening and closing force by the opeartor should not exceed 150N and maximum power consumption should not exceed 130W during operation mode. The operator should be equipped with EM failsafe / fail secure lock with Nemo Combi sensor with 2x Microwave for activation and double rows of 24 spots failsafe Safety infrared curtains without the need of Photocell. The system shall have constant power supply 230V+ 5%, 50Hz, AC The operator seamlessly integrates with the Profile System, designed to accommodate 8 - 12 mm toughened glass with appropriately sized rubber gaskets. Fixed Glass beside sliding doors should be finished with Twin Pro Profile.