REPAIRS REPLACEMENT OF EXISTING UMANG COMPLEX GATE AND COMPOUND WALL IN NAGPUR UNDER GE KAMPTEE.

Amount

Demolition of brick work, built in cement mortar or cement lime mortar including all quoins, pillars etc. and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 50m as complete all as specified and directed.

Demolition of reinforced cement concrete any description and in any position not otherwise specifically provided for and disposal of unserviceable materials, debris and rubbish off the premises complete all as specified and directed.

M&L for precast RCC 1:2:4 type B1 using 20mm stone aggregate as in landings, cover slabs, for manholes etc and similar articles with plain faces set in cement mortar 1:4 complete all as specified and directed.

M&L for brick with fly ash brick old size straight of curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed.

Material & labour for brick work with sub class B old size burnt bricks straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specifie and directed

M&L Form work to side of concrete in fdns, footing base, base of columns, side and soffits of plinth beam and simillar work complete all as specified and directed.

M&L for providing RCC 1:1 1/2:3 type A-1 (nominal mix) as in footing, foundation,beams, plinth beams, base for columns and mass concrete etc complete all as specified and directed.

M&L Form work to side of columns and simillar work complete all as specified and directed.

M&L for providing RCC 1:1 1/2:3 type A-1 (nominal mix) as in columns and pillars etc complete all as specified and directed.

M&L PCC 1:3:6 type C1 using 20mm graded stone aggregate as in coping including weathering throating and necessary formwork complete all as specified.

Taking down cement plaster of any description including racking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 and finished Fair and even without using extra cement complete all as specified.

Demolition of cement concrete in ground floor & pavings n.exc 15cm thk (below or above ground level) complete all as specified and directed.

M&L for Sand filling under floorings/pavement spread and levelled in layers n.exc 15cm thick complete including watering and consolidation complete all as specified and as directed.

M&L of Machine pressed precast conctete interlocking paver block colour glessy finished rubber pressed any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade ® with Grey cement and pigment complete all as specified and as directed.

M&L for chequred cement concrete tiles colour glessy finished rubber pressed 30 cm x 30 cm x 25 mm thick set jointed and pointed in neat cement slurry and pointed in coloured pigment over 20mm cement screed bed in cement mortar 1:6 complete all as specified and directed.

M&L Plain Cement concrete in Cement concrete in foundations, filling and mass concrete Type D2 1:4:8 (40mm graded aggregate) all as specified and directed.

M & L cement concrete tybe B- 1, 1:2:4 (20mm graded aggregate) in floor finish concrete surface even and smooth without using extra cement complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in cills, steps, seismic and other similar bands, plinth courses, lacing courses parapets and railing upto 60cm height, copings, kneelers, bed plates, hold fasts block, filling on pressed steel door/ frame etc complete all as specified and as directed.

M & L Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'B' complite all as specified and as directed.

S&F milt steel TMT bars 10 mm dia and over , cut to length, bent to shape requred, including crancing bending and binding with mild steel (anneal) wire not less than 0.90mm dia complete all as specified and as directed.

M&L mild steel TMT bars 5 to 10mm dia a as in stirrups, spacers and binders complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out hard/ dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and as directed.

M&L for cement concrete type B-2, 1:2:4 as in foundation, filling and mass concrete (Using 40mm graded stone aggregate complete all as directed.

S&F Mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes for notching of wire, etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 all as specified and directed.

Dismantling fencing wire mesh, any type complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed.

Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and as directed.

S & F in repair for Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed.

S & F MS screw bolts of dia 5-10 mm ( machine made ) with hexagonal or square at one end and screwded with other end or screwed both ends length of bolt n exc 5cm long complete all as directed by Engineer in charge.

S& F MS 10 mm dia and over round bars in chain link fencing complete all as directed by engineer in charge.

M & L for preparation of new steel surfaces of any description over 10 cm in width or grith and applying two coat of synthetic enamel paint over a coat of red oxide paint complete all as specified and as directed.

M&L Preparation new plastered surfaces of walls and applying two coats of cement base paint all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for and removing from site of work complete all as specified and directed.

Removing building materials etc. to a distance of exc 5.0 km under, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed.

M & L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

Supplied and fixed Steel rolling shutters ( thickness of lath 1mm) , with out ball bearing, as specified including top cover, an choring rod, hasp and staple and one shop coat of primer; erected in position as indi cated, complete: gear operated type with bevel gear box and crank handle complete all as specified and directed.

Dismantling of AC (Corrugated or semi corrugated etc) sheets in roof covering including ridges complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. complete all as specified and directed.

S&F ACP (Aluminium Composite Panel) sheet 3mm thick of any colour as in roof covering/cladding to wall, fixed with self tapping screws as specified.

M&L for Roof trusses (framed), trussed, purlins, crane ganbies, rails and fastenings and heavy bracket framing (lleam, tee, angle, charmel or flat sections) including distance pieces, cleats etc. conforming to IS 1161-1979 grade Fe 410W (Gde E-250) quality A complete all as specified and directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs. 91,508.30]

M/S Darshan Singh Plaha

Bidder Name

M/S Darshan Singh Plaha

Devika Constructions