REPAIR/ REPLACEMENT OF ROOF SHEET, PCC HARD STANDING, INTERLOCKING PAVER BLOCK, MS GATE, WPC JALLI AND OTHER CONNECTED MISC WORK UNDER THE AOR OF AGE B/R BHDC UNDER GE (EAST) DELHI CANTT-10

S&F in repair, in position Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet, 0.50mm thick of approved colour, having tensile strength of 550 MPA as in roof covering/cladding to wall, Chajja etc fixed with self tapping screws as specified, high tensile alloy steel trap sheet having 55 MPA yield strength and zinc (galvanized) + Aluminium combined, coating of 150 GSM/PM2(AZ-150) of 50mm TCT having top colour coat of regular modified polyester/silicon modified polyester/HDEP polyester of 18 to 20 micron and back coat of 5 to7 micron Epoxy primer fixes, RMR 1040 profile width 1125 mm complete all as specified & as directed.

Description all as per item No 01.00 here in before but plain sheet as in ridge/valley/gutter complete all as specified & as directed.

S & F in repairs 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixe with coach screw and washer in roof, wall etc. complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-charge.

Dismantling wood of any description Scantling / frame Work / trusses/purlin/ rafter/rails/ festenings /beam/posts/door frames etc of any size and shape complete all as specified and directed.

S&F mild steel rolled sections, Framed work as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, using FE-290 (Gde-E-165) complete all as specified and directed.

S&F mild steel joist channel angle for posts and struts in fencing, gate, tank staging and manhole/drain cover including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0 including demolition of old RCC/ CC manhole cover, complete all as specified and directed by Engr-in-Charge.

Demolition of brick work/stone bulder masonary built in cement mortar or cement lime mortar of any description and in any position all as specified.

M & L for brick work with sub-class B brick straight or curved on plan built in cement mortar 1 : 6 complete all as specified and directed

Taking down cement plaster/Grit plaster of any description on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc