Open Tender Notice for Structural Repair and Visitors Amenities to Brahmeswar Temple at Bhubaneswar, Dist - Khordha for 2024-25

Amount

Structural Repair and Visitors Amenities to Brahmeswar Temple at Bhubaneswar, Dist: Khordha

Item No.1: Providing and fixing double scaffolding system (cup lock type) on the exterior and interior side of Jagamohan and Garbhagriha, up to 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40 mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal &vertical tubes joint with cup & lock system with M.S.Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work for the required duration as approved and removing it thereafter at Brahmeswar Temple, Bhubaneswar.

Item No. 8 : Dismantling old, damaged wooden work with damaged wire mesh including cutting, removing and stacking at a suitable place at inside of Jagamohan Temple of Brahmeswar Temple, Bhubaneswar.

Item No. 9:Steel work in built up tubular hot finished seamless type tubes ( square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete at inside of Garbhagriha and Jagamohan for protection from birds at Brahmeswar Temple, Bhubaneswar.

Item No. 10 : Providing and fixing G.I. wire welded mesh of 10 Guage(2.55 mm) dia, with mesh opening size 1" x 1" by welding on Steel work in built up tubular hot finished seamless hollow tubes trusses for birds not entry to inside including cutting, fixing, welding and Nut Bolting etc all complete at Grabhugriha and Jagamohan of Brahmeswar Temple.

Item No. 11: Supply of ESE-60 Early Streamer Emission type Advanced ESE terminal, made up of SS 316L material and works on dual trust design. ESE terminal should comprised of separate electrically isolated dual SS 316Lpanels surrounding an SS Central Finial. ESE terminal should anticipate advanced triggering of min. 60 s. ESE terminal central finial should be made from solid SS rod and its length should be min. 85mm above surrounding panels. ESE terminal SS 316L is low carbon steel which exhibit better corrosion resistance and are stronger at elevated temperatures performance. For isolation of terminal Delrin Adapter should be provided at bottom of terminal which should give higher dielectric strength. ESE terminal should be tested in European accredited test laboratory after 2011 as per revised NFC standard. Terminal should be tested for impulse current withstand test in CPRI for 40kA.Terminal should be non-electronic and does not required any external power supply. Model STORMKING ESE-60TERMINAL, MAKE: PP STORMKING

Item No. 12: Supporting Mast SS: The mounting pole used to support the lightning air terminal shall either be a supporting mastor Free standing mast at an ideal height of 5m, above to be area protected or as per required level of protection. If any height restrictions are there then min height should be 2m but radius of protection will change according to height. The mounting pole and supports shall be securely fixed with brackets and guy wires where required to withstand maximum locally recorded wind velocity. Mounting Pole shall be non-corrosive and made up of medium class SS pipe of 2” dia having base plate at bottom for securely fixing mast on rooftop. Also PVC insulated metallic wire rope should be used for guying purpose. The down conductor shall pass through the centre of the pole for the entire length of the pole and it will be out at bottom of the pole. All the mounting accessories should be non-corrosive and made up of SS. Model: Supporting Guyed Mast: 5m X 2” dia with baseplate, guying kit and mounting accessories.

Item No. 13: Supply of 70Sqmm cross section down conductor of single core flexible Copper cable made of min. 990Noscopper strands of 3mm dia and having PVC insulation of min. 3mm thickness and overall dia of 16mm. It should be fixed using SS/GI saddles & fixtures every 0.5mtr.Model: Single core flexible Cu. Cable 70Sqmm with SS saddles.

Item No. 14: Maintenance free Safe Earthing Electrodes CPRI Certified, Code No. MES- 80 (3m) (G.I.) with ISI G.I. pipe dia 75 mm as secondary electrode of wall thickness 3.5mm and the primary Earthing Electrode will be 50mm X 6mm X 1nos G.I strip filled with a highly conductive &non-corrosive compound in between the primary Earthing and the secondary Earthing, the surface area in mm will be 7,06,500 for 3mtrs.length and Cross Sectional Primary conducting area is 300 sq.mm And solid G.I. base plate seals the unit at the bottom.(MES-FC ground Filling compound will be provided in 25 kgs Bags.)

Item No. 15: Ground Filling Compound (ROHS Certified) (MES GFC25KG filled surrounding to earthing electrode. It should absorb the moisture from surrounding area and it should be non corrosive in nature. It should maintain the constant ohmic value for long life. It should be supplied in packing of 25kgs bag. (2Bags required for each earthing electrode.)

Item No. 16.:Installation:- Mounting Lightning terminal on the Mast, Fixing the Mast on the top of roof, Lying the down conductor from the terminal to earth point, Clipping of cables in the building wall, Making 3Nos. of 10ft. earth installation, Pouring of Chemicals with Earthing pipe in to the hole and Lying of copper cable to connect the earthpit.

Item No. 17: Providing and fixing Stainless steel Twinbin, Litterbin, Dual pole dustbin, Dustbin with stand, branding dustbin Made with 304 grade steel, and with best in class mirror polished shinning pipes and sheet metal. Side rectangular pipes size: 25mm x 50mm. Dustbin size: 14"x 24". Branding board size: 37" x 8". Also provided with anti-stray animal spillage lock system and rain shed. Capacity 50liter each drum x 2 Nos at Brahmeswar Temple Bhubaneswar.

Item No. 18: Sub-main power panel board 63Amp (Outdoor type) Size: (36 X 36 X 12)inch box make 2 mm CR Sheet with heat chamber powder coated all door are moveable and steel lucking system including fitted with 63Amp 4-Pole MCCB= 1 No., 63Amp Spedal link = 1 Set, 63Amp Cupper Bus Bar = 1 Set, LED indicator = 1 Set, 32Amp TPN MCB = 1 No., 63Amp TPN MCB = 1 No., 32Amp D.P. MCB = 6Nos., with factory charges including installing and testing on site etc all complete at Brahmeswar Temple, Bhubaneswar.

Item No. 19: Painting with synthetic enamel paint one or more coat supplied on old work of approved brand and manufacture of required colour to give an even shade at M.S. Grill Structure of boundary wall and entrance gate of Brahmeswar Temple, Bhubaneswar.

Item No. 20: Disposal of malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead up to 10 km for all lifts, complete as perdirections of Site-in-charge at Brahmeswar Temple, Bhubaneswar.

Item No. 22: Solar light solar 12W LED flood light automatic and remote control for exterior including6V/15W efficient mono crystal line solar panel illuminate outdoor spaces with the solar flood light including fitting, fixing and testing etc all complete at Brahmeswar Temple, Bhubaneswar.

Item No. 23: Flush/ Ruled pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) at Laterite stone masonry boundary wall including water curing at Brahmeswar Temple, Bhubaneswar

UTKAL ENTERPRISERS (BID ID -3128101)

SHASANK SEKHAR NAYAK (BID ID -3130366)