Repairs to fencing in MD officers and JCOs / ORs accn in the area of AGE B/R I under GE (N) Ahmednagar

Amount

Dismantling of stone slabs and tiles of any description or thickness in floors, approns etc laid and bedded in any mortor etc complete all as specified and directed by Engineer-in-Charge

Demolition of plain cement concrete (unreinforced) in ground floor not exceeding 15 cm thick etc complete all as specified and directed by Engineer-in-Charge

Material and labour for 75 mm thick plain cement concrete 1:4:8 type D2, using 40 mm graded stone aggregate as in sub base etc complete all as specified and directed by Engineer-in-Charge

Material and labour for rough dressed shahabad stone, 25 mm to 40 mm thick laid over and including 15 mm thick screed bed in cement mortar 1:6, laid and jointed pointed in cement mortar 1:3 etc complete all as specified and directed by Engineer-in-Charge

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand etc complete all as specified and directed by Engineer-in-Charge

Demolition of plain cement concrete solid block /brick masonary/stone masonry/stone built in cement mortar etc complete all as specified and directed by Engineer-in-Charge

Material and labour for brick work with fly ash straight or curved on plan exc 6m mean radius built in cm 1:6 etc complete all as specified and directed by Engineer-in-Charge

M&L for precast cement concrete block masonery type C1 (1:3:6) with solid blocks exc 10 cm in width and setting in mortar 1:4 etc complete all as specified and directed by Engineer-in-Charge

Material and labour for rendering, 15 mm thick on stone/brick / concrete surfaces in cement mortar 1:6 surfaces finished even and smooth without using extra cement etc complete all as specified and directed by Engineer-in-Charge

M&L for 75mm thick PCC (1:2:4) type C-2 using 40mm graded mechanically srushed stone aggregate as in plinth protection, concrete road or parking area finished even and smooth without using extra cement with & Including 10mm wide 30mm deep joints joints with sand mixture etc complete all as specified and directed by Engineer-in-Charge

Dismantling of posts struts (wood,steel or RCC) any section taking out embeded portion and making good disturbed ground etc complete all as specified and directed by Engineer-in-Charge

Dismantling fencing wire mesh any type and any description etc complete all as specified and directed by Engineer-in-Charge

M&L for Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, in soft and loose soil returning,filling in and ramming earth or broken rubble mixed with earth around, removing surplus material n.exc 50 mtr and making good distrubed surface etc complete all as specified and directed by Engineer-in-Charge

Supply and fix mild steel angle iron for posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 etc complete all as specified and directed by Engineer-in-Charge

Supply and fix Mild steel bolts 10mm dia and 65 mm long purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut etc complete all as specified and directed by Engineer-in-Charge

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire etc complete all as specified and directed by Engineer-in-Charge

Supply only chain link fencing made cut from GI wire 10 gauge and 50 mm apperture weight not less than 3 kg / Sqm etc complete all as specified and directed by Engineer-in-Charge

Supply and fix 10 mm dia mild steel round bars to tighten chain link fencing including necessary hooking binding cutting etc complete all as specified and directed by Engineer-in-Charge

Material and labour for plain cement concrete in PCC 1:4:8 type D2 using 40 mm graded aggregates in foundation filling and mass concrete or similar work etc complete all as specified and directed by Engineer-in-Charge

Material and labour for flat iron 40 x 6 mm cut to required length including drilling holes for fixing of nut and bolts to hold chain link fencing etc complete all as specified and directed by Engineer-in-Charge

Taking down cement plaster on brick/stone walls including taking out joints hacking for keys crubbing down with water etc complete all as specified and directed by Engineer-in-Charge

Material and labour for TMT bars 8 to10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia etc complete all as specified and directed by Engineer-in-Charge

M&L for providing precast cement concrete type B-1 1:2:4 20mm aggregate in landings, cover slabs (for man holes etc) chulla hoods, chajjas, water troughs mangers, shelves and similar articles with plain faces, and setting in mortar complete with joints to match set in CM 1:4 etc complete all as specified and directed by Engineer-in-Charge

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and directed by Engineer-in-Charge

Material and labour for two coats of synthetic enamel paint over a coat of red oxide primer for new / old steel surfaces of any description exc 10 cm width or girth including preparation of surfaces etc complete all as specified and directed by Engineer-in-Charge

Supply and fix mild steel Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 etc complete all as specified and directed by Engineer-in-Charge

An amount of Rs 64,037.50 shall be deducted from BOQ on account of schedule of credit

M/S-B.R.SONAWANE

M/S. Z.K.ENTERPRISES, AHMEDNAGAR

MS. G.A. CONSTRUCTION

Aakar Constructions

M/s IBEX Engineers and Contractors

Ms. M.D. Auty

R. T. Saluji

M/S Tirupati Goroba Shendge