REPAIRS AND MAINTENANCE/REPLACEMENT OF HPSV WITH LED FITTINGS, LT PANELS WITH OTHER CONNECTED ITEMS,AND MAINTENANCE OF SWIMMING POOL UNDER GE(CENTRAL) BANGALORE

Amount

Excavation in trenches in hard/dence soil,not exceeding 1.5 Mtr wide and not exceeding 1.5 mtr in depth and geting out in hard/dense soil complete all as directed.

Returning filling in, earth including spreading leveling watering and well ramming in layers not exceeding 25cm in soft/loose soil after the pipes fittings are laid/fixed jointed and tested complete all as specified and directed.

Removing excavated surplus soil to a distance not exceeding 50 meter and depositing where directed at a level not exceeding 1.50 meter above the starting point complete all as specified and directed

Supply and spread river sand to required width at bottom and top for cable cushioning all as specified and directed.

Supply and lay common burnt old size bricks of sub class B laid at right angle on the cable complete in trenches for cable protection complete all as directed by Engr-in-charge.

Supply & laying XLPE insulated, PVC sheathed, strip armoured electric cable with stranded aluminium conductor working voltage upto1100 volt of 10 Sqmm 2-core as per IS 7098 Pt I in trenches, culvert, through pipe etc including connecting both end with proper size of alluminium lugs duly crimped with die press crimping device and cable gland complete all as specified and directed by Eng-in-charge.Note Excavation, earth work, sand cushioning, cable cover, returning/filling will be measured and paid seperately).

All as per item No 06 here-in-before but cable of size 16 Sqmm 2 core.

All as per item No 06 here-in-before but cable of size 10 Sqmm 4 core.

All as per item No 06 here-in-before but cable of size 25 Sqmm 4 core.

Supply & fixing in repairs of MCCBs of following current carrying capacity including necessary connecting terminals to bus bar, nut bolts etc complete all as directed . Make: HPL/C&S/Schneider/L&T/ Indoasian/Hager/Havells (a) 125 Amps, 3P,Adjustable type, 415 V MCCB, 16KA rating

(b) 100 Amps, 3P, 415 V MCCB, 16KA rating

(c) 4 Pole MCCB, 415 V, Adjustable type with breaking capacity 36 KA, 400 A rated

(d) 4 Pole MCCB, 415 V, Adjustable type with breaking capacity 36 KA, 250 A rated

(e) 4 Pole MCCB, 415 V, Adjustable type with breaking capacity 36 KA, 200 A rated

(f) 4 Pole MCCB, 415 V, Adjustable type with breaking capacity 36 KA, 160 A rated

(g) 4 Pole MCCB, 415 V, Adjustable type with breaking capacity 25 KA, 100 A rated . Make: L&T/Hager/Havells/ Indoasian/Schneider/ABB

Supply and fixing in replacement Mild steel galvanized pipe light grade for protection & passing of LT cable fixed to poles/walls/laid under floor/roads complete including fittings/clamps as required at site all as specified for size of 25 mm bore dia.

S&F in replacement MCB 4 pole 63 Amps, 415 Volts all as directed..Make- Indo asian optium /Havells/siemens

S&F in replacement MCB 4 pole 40 Amps, 415 Volts all as directed..Make- Indo asian optium /Havells/siemens

S&F in replacement MCCB 4 pole 63 Amps, 415 Volts, 25 KA breaking capacity, with adjustable thermal and fixed magnetic release all as directed..Make- Indo asian optium /Havells/siemens

S & F Tmelite 40 A 3 pole /230 V Digital time switch, pole mounted single door outdoor type totally enclosed for street light controlling panel incl fixing arrangement with 40X5mm clamp 2 Nos with nuts and bolts complete accessories all as specified and directed. Make : Indoasian,Philips/CG/Bajaj

S&F New generation, post-top,lattern landscape luminaire 15 watts, energy saving, powder coated aluminium die cast and spun aluminium body with clear/opel diffuser ,environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium with high power LEDs as light source, IP -65 all as specified and directed. Make : Havells,Philips/CG/Bajaj

M&L for PCC 1:3:6 type C-1 using 20 mm graded mechanically crushed stone aggregate for mass filling in pole pit, coping and foundation etc, complete all as specified and directed.

Supply and fix LED street/building light fitting, 1x45 watts,min 100 lumens/watt with highly effective and efficient luminaire rubust design IP-66 fixed on walls with all fixing accessories such bend pipe, square/round blocks, clamps/screws, etc and connecting up with three core round flexible copper conductor cable of size 1.5 sqmm complete all as specified and directed.

Supply and fix LED street/building light fitting, 1x60 watts,min 100 lumens/watt with highly effective and efficient luminaire rubust design IP-66 fixed on walls with all fixing accessories such bend pipe, square/round blocks, clamps/screws, etc complete all as specified and directed

S&F energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium iP65 flood light with high power leds as light source, suitable for highlighting architectural facade highmast and general purpose lighting of 120 watt LED, min 100 lumens/Watt with all accessories for fixing on pole/wall and electrical connection etc complete all as specified and directed

M&L for GI tubing Bracket 40mm medium grade 1.5 mtr lenth,bent to 60° shape including grouting/fixing 2-Nos clamps required size,including bolts for fixing street light etc complete all as specified and directed

Supply & fix in repair FRP junction box (weather proof) of size 240 x 130 x 110mm including single phase connector arrangement alongwith suitable clamps including MCB SP 5 Amps 10 KA rating,fixing with flat iron clamps, nuts and bolts complete all as specified and directed. Make : Sintex or equivalent

Supply and fix, in repair PVC insulated three core,1.5 Sqmm cables with copper conductor copper flexible cable with earth conductor complete all as specified and directed.Make : poly cab/Havells/finolex

Taking down old unserviceable light fitting HPSV/LED street light fitting of any make and type complate with accessories opening and checking defective/unserviceable accesssories/spare parts and replacing the same with new one after cleaning dust from internally & externally surfaces of light fittings including cleaning of acrylic cover cover, refixed the light fitting in same position after doing the necessary testing, complete all as directed. Note : (i) Spare parts shall be measured and paid seperately as "Supply only" under respective items of schdule 'A'. (ii) The cost of bolt, nut & washers etc required if any shall be deemed to the included in unit rate.

Supply only LED Driver 240 Volt 60 Watt for street light as per existing model complete all as directed.

Supply only LED Driver 240 Volt 45 Watt for street light as per existing model complete all as directed.

Supply only LED Driver 240 Volt 30/25 Watt for street light as per existing model complete all as directed.

M&L for earthing complete with galvanised steel earth plate electrode 60cm x 60cmx6.3 mm thick buried directly in ground (Earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connecting with steel GI earth wire 4mm dia by means of bolt nut check nuts and washers including PCC pit with 1:2:4 type B-1 using 20mm graded stone aggregate and frame cover of angle iron 25x25x6mm, MS sheet 3mm thick, and handle of 6mm dia MS bar made to shape, GI medium grade 20mm bore pipe for watering common salt chorcoal funnel wiremesh, earthwork in any type of soil returning filling in and removal of soft/loose soil to a distance n. exc 5 mtr including earth test point and making connections, testing on completion all as per electric plate No 5 of SSR Part-I and directed by engr-in-charge at site including taking down of old U/S eartning materials NOTE : The unit rate quoted shall be inclusive of 7.5 mtr earth lead.

Clearing of bushes/small plants upto root level around and surroundings areas E/M installations (i.e.Two Pole/ Four structures, outdoor-substation yards, pump house & STP installations etc) including surface dressing n.exc 15 cm deep and removing debris to a distance n.exc 50m complete all as directed

Material & labour for decarbonising of LT panel board of any size/ capacity made out of thermoplastic-polycarbonate boxes with IP-65 protection by taking shut down of panel & strip opening of boxes carefully, cleaning the carbon content with CTC solution, replacement of embedded polyurethane gasket,replacement of pitted control wiring, thimbles ,replacement of nuts, bolts ,washers, cable glands/ PVC gromates, cable lugs, tightening the busbar chamber, dismantling the broken boxes,,welding of doors/hingesincluding inspection of Ammeters/ Voltmeters/ Multifunction meters re-assembling painting of panel, testing & commissioning complete all as directed.

Material & labour for old painted rusted steel/iron surface of 9mtr steel tubular electric pole including cross arms other acessories/fittings by scraping properly and applying two coats of aluminimum paint over a coat of primer including rewriting pole number using suitable tint paint making circular shape background and height using systhetic enamel paint upto 80cm height from the top of coping with multicolor strip as per code complete all as specificed and directed.

M&L for preparartion of old section (i.e post and other steel member) and chain link fecncing and applying two coat of aluminimum paint complete all as direcrect

Supply and filling chlorination chemical highly efficient(high strengh) Calcium based granular(65-80%chlorine content)disinfectant complete as as specified and directed by Engineer-in-charge

Design, Fabrication, supply, installation, commissioning and testing Double Door Panel board manufactured from CPRI approved firm with canopy head, out door, cubical type panel board of over all min dimension 1.2 m (L) X 1.00m (H) X 0.50m (W) fabricated with 3.0mm thick CRCA sheet on mild steel angle iron 50X50X6 mm thick frame, totally enclosed type dust & vermin proof back side open-able fixed with hinged shutter and front side open-able with hinged shutter and locking arrangement for individual MCCBs/MCBs , powder coated finished both internally and externally suitable for 415Volt AC 50 Hz 3 Phase 4 wire system by means of Alluminium bus bar of 250 Amps Capacity (Main bus bar ) and 800 Amps Loop Bus bar with coloured insulating tape/sleeves mounted on porcelain or synthetic insulators with provision for fixing MCCBs/MCBs necessary inter connections with Aluminium bar/strip duly coloured code insulation and providing under mentioned equipments & accessories including connections of all out going/in coming existing/New cables of required size and including PCC foundation in 1:3:6, type C1 of 0.5 mtrs height above GL and 0.30mtrs below GL including necessary earth work complete all as specified and as directed.

(a) INCOMING: MCCB 4 pole 450Amp,Icu=Ics=25KA, Adjustable thermal and adjustable Magnetic setting with extended terminals - 01No Make: L&T/Legrand/ ABB/Siemens/Havells (b) OUTGOING: MCCB 4 pole 160Amp,Icu=Ics=25KA, Adjustable thermal and adjustable Magnetic setting with extended terminals -03 Nos Make: L&T/Legrand/ ABB/Siemens/Havells

(c) O/G MCB TPN 63Amp, 10KA,C curve - 02 Nos . Make: Legrand cat No 408683 or equivalent model of L&T/ ABB/Siemens/Havells. (d) Indicating lamp LED type 240V 50 Hz AC -one set of 3 .Make: L&T/Legrand/ ABB/Siemens/Havells (e) Multifunction meter.

M/S Jaiprakash Electrical and Engineering Works

Shiva Shakthi Electrical Enterprises

B5BUILDING SOLUTIONS

GS TRADERS

kamadhenu Electricals