GE(W)/HSR-12/2021-22 SPECIAL REPAIR TO NISSAN HUT GARAGE AT HISAR MIL STN UNDER GE (WEST) HISAR

Amount

Dismantling steel (corrugated, semicorrugated, etc) sheets in roof coverings any thickness and remove from site complete all as specified and directed.

Taking down cement plaster incl racking out joints, hacking for key & scrubbing down with water etc including removing rubbish complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches pillars etc and removing rubbish complete all as specified and directed.

M&L for brick work with fly ash Bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 complete all as specified and directed.

All as per item No 04 above but except bricks . Note old bricks obtained from demolition shall be reused.

M&L for 15mm thick plaster in CM 1:4 on brick / concrete wall surface finished even and fair without using extra cement complete all as specified and directed.

M&L for 10mm thick rendering in CM 1:6 over brick / concrete wall surfaces trowelled to even & fair without using extra cement on wall surfaces complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description and in any position and remov from site complete all as specified and directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410 -W (Gde-E- 250) quality-A complete all as specified and directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. Note : Sheets are to be fixed on arch type curved shape.

S&F 1.25mm thick Plain, black, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) welded or soldered joints complete all as specified and directed.

Taking down old steel sliding gates of height exc 4 mtr and widht exc 2 mtr and easing with necessary welding, greasing of wheels & tracks, cleaning of tracks, replacing CGI sheets and steel members, if necessary and re-fixed in position for fee ply in tracks complete all as specified and directed. Note :- CGI/PBI sheets and steel memberss will be measured in and paid seperately under respective items of BOQ.

M&L for preparation of new untreated steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coat of cement base paint of any tint over one coat of primer complete all as specified and directed

Demolition of Stone sett paving of any description or thickness laid, bedded and jointed in cement mortar including removing rubbish complete all as specified and directed.

Demolition of cement concrete as in ground floors and pavings not exceeding 15 cm thick below or above ground level (unreinforced) incluiding removing rubbish complete all as specified and directed.

M&L for Stone sett flooring with stone setts of size 200 to 250 mm long, 150 to 200mm wide and 150mm deep and sides dressed; bedded in cement mortar 1:3, joints 20mm thick; grouted in cement mortar 1:2 with an admixture of metallic floor hardner 5% by weight of cement and struck flush complete all as specified and directed.

M&L for 75mm thick cement concrete type B-2 , 1:2:4 ( using 40mm graded stone aggregate ) as in floor surface finished even and fair without using extra cement complete all as specified and directed.

Taking down carefully copper/aluminum point wiring (light/fan/socket or power) complete including taking out existing unserviceable terminal boxes & conduit with switches/sockets/fan regulators and fittings such as ceiling rose, pendants, tube light fittings, lamp holders, brackets light fittings, rectangular blocks etc. and making good disturbed surface of walls, floors etc. to match with the existing surface etc complete all as specified and directed.

M&L for point wiring for one light / bell / Ceiling fan/Exhaust Fan point controlled by one switch with 1.5 Sqmm (nominal area) PVC insulated, unsheathed multi strand copper conductor cable FRLS drawn through rigid PVC coduit 20 mm dia medium grade and conduit accessories PVC conduit type in walls/ceilings and including change of steel terminal sunken boxes and 3 mm thick phenolic laminated sheet top cover for sunken boxes flush to surface for one light point/fan point, controlled by one switch on the same board with other switch or independent including PVC insulated unsheathed 1.5 Sqmm copper conductor cable FRLS connected to common earth dolly complete complete all as specified and directed. (Note :- Switches, sockets etc shall be measured and paid for separately under appropriate items of BoQ' ).

All as per item No. 105 above but for one 5 pin 5 Amp socket outlet on independent board controlled by one number one way switch on independent board.

All as per item No. 105 above but for one 5 Pin 5 Amp socket outlet on the same board controlled by one number one way switch on same board.

All as per srl item No. 105 above but for 15 Amp socket out let by using 2.50 Sqmm PVC insulated unsheathed copper conductor cable FRLS multi strand on independent board including provn of 2.50 Sqmm unsheathed, multi stranded copper conductor cable FRLS continues as earth wire connected to earth dolly etc complete all as specified and directed.

S&F flush type socket outlet multipurpose 3&6 Pin, 15 Amp 230 volts AC complete all as specified and directed.

S&F flush type socket outlet multipurpose 2&3 Pin, 5/6 Amp 230 volts AC complete all as specified and directed.

S&F switch piano flush type, single pole, one way, 5/6 Amp, 230/240 Volts grade complete all as specified and directed.

S&F switch piano flush type, single pole, one way, 15 Amp, 230/240 Volts grade complete all as specified and directed.

S&F in replacement energy saving LED 80W flood light, power coated PDC aluminum body with toughened glass visor fitted in frame, IP66 connected with and including 01 Sqmm flexible copper multistranded conductor cable to ceiling rose including light bracket made to shape as reqd of GI pipe/flat iron/light grade and fixed with MS camps of suitable size 02 Nos nuts, bolts and washers on wall/nuts complete all as specfied and directed.

S&F ceiling rose surface bakelite, 3 terminals with back plate etc complete all as specified and directed.

S&F in replacement LED tube light fitting 18W metallic frame /batten, Retro, Box type surface and wall mounted, including LED tube light rod , high efficiency including making connection, complete all as specified and directed.

S&F MCB SPN, 32 to 40 Amps 240 Volts , type 'B' curve, 10 KA, for fixing in DB complete all as specified and directed.

S&F MCB SP, 6 to 32 Amps 240 Volts , type 'B' curve, 10 KA, fixing in DB complete all as specified and directed.

S&F in replacement Sheet metal enclosures for DBs when MCBs to be used Single pole and neutral (SPN 240 Volts) with 200 Amps rated busbar 8 way double door complete and all as specified and directed

M&L for earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level and connected to and including galvanized iron earth wire 4 mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part-I and connection to main switch board/Test point/panel/ equipment and testing on completion including excavation and earth work in any type of soil, returning filling in, and removal of surplus spoil to a distance not exc 50 metre, charcoal and salt in alternate layer 15 cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering and 15 mm bore upto 7.50 metre long GI pipe light grade for earth wire protection fixed with poles/wall with two clamps, made from MS flat 25 mmx3mm, bolts, nuts and washers, PCC chamber (1:3:6) type C1, 40mm thick precast RCC cover 1:2:4 type B1 shall be provided on CI frame etc complete all as specified & as directed including dismantling & taking out old existing unserviceable earthing.

Supplying laying, jointing, testing and commissioning of LT UG XLPE insulated screened PVC beded galvanised steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor 1100 volts grade of size 16 sqmm 2 core including taking down old U/S cable complete all as specified and directed. (Note :- cable may be laid in trenches, under road, across the nallah, along poles/walls and in ducts etc . Eexcavation, earhtwork, sand cushioing, cable cover, pipe for cable protection to be measured and paid for separtely) complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out and getting out in soft/ loose complete all as specified.

Returning filling with earth obtained from excavation including spreading, consolidation in layers not exceeding 15 cms thick, complete all as specified and directed.

Returning filling with earth obtained from excavation including spreading, consolidation in layers not exceeding 15 cms thick, complete all as specified and directed.

M&L for Sand filling in trenches with clean dry fine sand unwashed 8cm thick below cable and 15 Cm thick after laid thincluding gently punning around cables complete all as specified and directed Note : 18cm punned thickness shall be measured and paid

M&L for bricks covering to under ground cable using sub class B bricks laid dry, flat, perpendicular to the direction of the cable complete all as specified and directed.

S&F in replacement LED street light luminaries of cap 35 watt, SPD 10 KV internal with lense, 240 volt, ,pressure dia cast aluminium housing frame, heat resistant toughtened clear glass with frame complete with accessories , IP 66 protection, pre wired up to a terminal block and mounting/attachment of GI pipe 40mm dia light grade bracket bend to required shape for fixing of light of length 1.2 mtr including MS climps nuts bolts & whaser etc complete all as specified and directed.

M&L for replacement of 40 mm bore GI pipe light grade laid in trenches or fixed to wall/pole for protection of cable/earthing strip etc complete all as specified and directed.

Puja Traders

m/s krishna engineers1

LACHHMAN SINGH AND BROTHERS

M/S Sulakh Brothers