Consrtuction of Chain link Fencing for Receiving Station Kanzalwan

Amount

Construction of Chain link fencing for Receiving station Odina for Kanzalwan

Earthwork in excavation over areas (exceeding 30 cms in depth, 1.5m in width as well as 10 Sqm on plan) incld. disposal of excavated earth, and lift upto 1.5m, (All kinds of soil). By mechanical means (for Fencing Walls, Breast Wall, Gate Pillars, Compound Walling)

Providing and laying of stone soling hand packed including ramming, dressing, Watering etc. and all leads. Lifts, carriage upto site complete (for Fencing Walls, Breast Wall, Gate Pillars, Compound Walling)

Providing & laying in position cement conc. of specified grade excld. Cost of centering & shuttering- all work upto plinth level in 1:2:4 (1 cement :2 coarse sand :4 graded stone agg. 40 mm nominal size (Crushed) M-15 Grade PCC (for Fencing Walls, Breast Wall, Compound Walling)

Providing and Reinforcement of cement concrete M 20 grade in walls (any thickness) incld. attached pilasters, buttresses, plinth & string courses, fillets, columns, pillars, piers, abutments, posts & struts etc. upto floor five level excld. cost of centering, shuttering finishing & reinforcement (For Gate Pillars Under Ground, Gate Pillars Above Ground)

Providing and Reinforcement for RCC work incld. straightening, cutting, bending, placing in positions and binding all complete Steel bars of sizes (T.M.T). For Gate Pillars (iron 16mm, Iron, 12, iron 10mm)

Centering & shuttering incld. strutting, propping etc. & removal of form for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. (for Fencing Walls, Breast Wall, Compound Walling)

Centering & shuttering incld. strutting, propping etc. & removal of form for Columns, pillars, piers, abutments, posts and struts (for Gate Pillars)

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. in gates etc welded properly (For Angle posts 65x65x6mm, Posts, Braces, Top Angle 50x50x6mm, Flate iron 40x5mm), (Compound Walling, Angle 65x65x6mm, Top Angle 50x50x6mm, Flat iron 40x5mm), (Gate Hold Fasts, Angle 65x65x6mm) and (Gate, Angle 65x65x6mm, Plate iron 2mm thick)

Providing and fixing Galvanized Iron chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge Made of G.I. wire of dia 4 mm (For Walls, Compound Walling)

Applying priming coat With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel galvanized iron/steel works (For Posts, Braces, Top Angel, Gate)

Painting with aluminum paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Carriage of all materials required for construction from source upto site of work by mechanical transport

Sand Av. Lead 30 Km

Stone Aggregate Av. Lead 20 Km

Stone Av. Lead 20Km

Cement & Steel etc. Av. Lead 10 Kms

IMTIYAZ AHMAD FAFOO

M/S IRSHAD AHMAD LONE